* [Comm] gprs -irda -pppd
@ 2002-09-26 15:03 Michael Bykov
2002-09-26 15:12 ` Korshunov Ilya
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Michael Bykov @ 2002-09-26 15:03 UTC (permalink / raw)
To: community
Настроил gprs по IR на Toshibe, телефон видится и звонит,
работает. Но когда стартую $pppd call gprs-moto, скрипт
/etc/ppp/ip-up стартует и тут же вываливается.
В чем может быть дело - я указал user mtu, пароль тоже mtu, это
правильно, кто-нибудь звонит по gprs в MTU?
Вот лог, настройки вышлю мылом если надо:
$pppd call gprs-moto
GPRS modem init: press <ctrl>-C to disconnect
+ defining PDP context
+ defining QoS requirements
+ attaching to GPRS
+ requesting data connection
+ connected\rSerial connection established.
using channel 7
Using interface ppp0
Connect: ppp0 <--> /dev/ircomm0
rcvd [LCP TermReq id=0x1b]
sent [LCP ConfReq id=0x1 <asyncmap 0x20a0000> <magic 0x4eb78b8c> <pcomp> <accomp>]
sent [LCP TermAck id=0x1b]
rcvd [LCP TermReq id=0x1b]
sent [LCP TermAck id=0x1b]
rcvd [LCP ConfReq id=0x1d <mru 2000> <asyncmap 0xa0000> <pcomp> <accomp> <magic 0x191eee5e> <auth pap>]
sent [LCP ConfAck id=0x1d <mru 2000> <asyncmap 0xa0000> <pcomp> <accomp> <magic 0x191eee5e> <auth pap>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x20a0000> <magic 0x4eb78b8c> <pcomp> <accomp>]
sent [PAP AuthReq id=0x1 user="mtu" password=<hidden>]
rcvd [PAP AuthAck id=0x1 ""]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0>]
sent [CCP ConfReq id=0x1 <deflate 15 18 04 78 00 15 03 2f]
rcvd [IPCP ConfNak id=0x1 <addr 192.168.100.100>]
sent [IPCP ConfReq id=0x2 <addr 192.168.100.100>]
rcvd [IPCP ConfReq id=0x1 <addr 192.168.100.100>]
sent [IPCP ConfAck id=0x1 <addr 192.168.100.100>]
rcvd [LCP ProtRej id=0x1e 80 fd 01 01 00 0f 1a 04 78 00 18 04 78]
rcvd [IPCP ConfAck id=0x2 <addr 192.168.100.100>]
local IP address 192.168.100.100
remote IP address 192.168.100.100
Script /etc/ppp/ip-up started (pid 5354)
Script /etc/ppp/ip-up finished (pid 5354), status = 0x0
rcvd [LCP TermReq id=0x1f]
LCP terminated by peer
Script /etc/ppp/ip-down started (pid 5447)
sent [LCP TermAck id=0x1f]
Script /etc/ppp/ip-down finished (pid 5447), status = 0x0
rcvd [LCP TermReq id=0x1f]
sent [LCP TermAck id=0x1f]
Connection terminated.
Connect time 2.6 minutes.
Sent 45 bytes, received 30 bytes.
+ sending break
+ dropping data connection\rdisconnect script failed
--
M.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Comm] gprs -irda -pppd
2002-09-26 15:03 [Comm] gprs -irda -pppd Michael Bykov
@ 2002-09-26 15:12 ` Korshunov Ilya
2002-09-30 7:39 ` Artem Pastuchov
2002-09-30 19:12 ` Serge Skorokhodov
2 siblings, 0 replies; 5+ messages in thread
From: Korshunov Ilya @ 2002-09-26 15:12 UTC (permalink / raw)
To: community
В сообщении от 26 Сентябрь 2002 19:03 Michael Bykov написал:
> Настроил gprs по IR на Toshibe, телефон видится и звонит,
> работает. Но когда стартую $pppd call gprs-moto, скрипт
> /etc/ppp/ip-up стартует и тут же вываливается.
>
> В чем может быть дело - я указал user mtu, пароль тоже mtu, это
> правильно, кто-нибудь звонит по gprs в MTU?
Если вход гостевой то guest и mtu
--
WBR
Korshunov Ilya
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Comm] gprs -irda -pppd
2002-09-26 15:03 [Comm] gprs -irda -pppd Michael Bykov
2002-09-26 15:12 ` Korshunov Ilya
@ 2002-09-30 7:39 ` Artem Pastuchov
2002-09-30 8:35 ` Re[2]: " Evgeny Yugov
2002-09-30 19:12 ` Serge Skorokhodov
2 siblings, 1 reply; 5+ messages in thread
From: Artem Pastuchov @ 2002-09-30 7:39 UTC (permalink / raw)
To: community
26 Сентябрь 2002 19:03, Michael Bykov написал:
> Настроил gprs по IR на Toshibe, телефон видится и звонит,
> работает. Но когда стартую $pppd call gprs-moto, скрипт
> /etc/ppp/ip-up стартует и тут же вываливается.
>
> В чем может быть дело - я указал user mtu, пароль тоже mtu,
> это правильно, кто-нибудь звонит по gprs в MTU?
>
Может быть MTS ?
--
С уважением,
Артем Пастухов past@yam.ru
ЯМ Интернешнл http://www.yam.ru
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re[2]: [Comm] gprs -irda -pppd
2002-09-30 7:39 ` Artem Pastuchov
@ 2002-09-30 8:35 ` Evgeny Yugov
0 siblings, 0 replies; 5+ messages in thread
From: Evgeny Yugov @ 2002-09-30 8:35 UTC (permalink / raw)
To: Artem Pastuchov
Здравствуйте Artem,
Monday, September 30, 2002, 2:39:12 PM, you wrote:
AP> 26 Сентябрь 2002 19:03, Michael Bykov написал:
>> Настроил gprs по IR на Toshibe, телефон видится и звонит,
>> работает. Но когда стартую $pppd call gprs-moto, скрипт
>> /etc/ppp/ip-up стартует и тут же вываливается.
>>
>> В чем может быть дело - я указал user mtu, пароль тоже mtu,
>> это правильно, кто-нибудь звонит по gprs в MTU?
>>
AP> Может быть MTS ?
Хм а логи в студию!?
--
With Best regards,
Evgeny Yugov,
MTS, programmer of Advanced Technologies Departament.
mailto:yugov@scs-900.ru
--
Брак - это союз двух людей, каждый из которых считает другого домашним животным.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Comm] gprs -irda -pppd
2002-09-26 15:03 [Comm] gprs -irda -pppd Michael Bykov
2002-09-26 15:12 ` Korshunov Ilya
2002-09-30 7:39 ` Artem Pastuchov
@ 2002-09-30 19:12 ` Serge Skorokhodov
2 siblings, 0 replies; 5+ messages in thread
From: Serge Skorokhodov @ 2002-09-30 19:12 UTC (permalink / raw)
To: community
> Настроил gprs по IR на Toshibe, телефон видится и звонит,
> работает. Но когда стартую $pppd call gprs-moto, скрипт
> /etc/ppp/ip-up стартует и тут же вываливается.
>
> В чем может быть дело - я указал user mtu, пароль тоже mtu, это
> правильно, кто-нибудь звонит по gprs в MTU?
>
> Вот лог, настройки вышлю мылом если надо:
>
> $pppd call gprs-moto
<skip>
> rcvd [LCP TermReq id=0x1f]
> LCP terminated by peer
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
У меня такое впечатление, что неправильно насторен gprs в самом
телефоне, из-за чего "не подхватывает сервер". Или же просто gprs
работает в пробном режиме, а конкретнее -- в данный момент не
работает:( Я давно не пытался подключится к MTS, но это письмо
уходит в рассылку через BeeLine GPRS, так что принципиально
должно работать.
> Script /etc/ppp/ip-down started (pid 5447)
> sent [LCP TermAck id=0x1f]
> Script /etc/ppp/ip-down finished (pid 5447), status = 0x0
> rcvd [LCP TermReq id=0x1f]
> sent [LCP TermAck id=0x1f]
> Connection terminated.
> Connect time 2.6 minutes.
> Sent 45 bytes, received 30 bytes.
> + sending break
> + dropping data connection
> disconnect script failed
>
>
>
>
> --
>
>
> M.
>
>
> _______________________________________________
> Community mailing list
> Community@altlinux.ru
> http://www.altlinux.ru/mailman/listinfo/community
>
--
Serge Skorokhodov aka suralis
suralis-s@mtu-net.ru
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2002-09-30 19:12 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2002-09-26 15:03 [Comm] gprs -irda -pppd Michael Bykov
2002-09-26 15:12 ` Korshunov Ilya
2002-09-30 7:39 ` Artem Pastuchov
2002-09-30 8:35 ` Re[2]: " Evgeny Yugov
2002-09-30 19:12 ` Serge Skorokhodov
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git