[mdk-re] под Spring_ом не пишутся/ не форматятся CDRW

[mdk-re] под Spring_ом не пишутся/ не форматятся CDRW

[johngun]

Доброго времени суток соратники!
 Вот описал проблему под темой -- > " под Spring_ом странно форматятся/пишутся CDRW "
,но ответа не получил
все также ... хотя раньше на этомже железе все писалось отменно.
 Уже несколько раз ядро пересобирал (2.4.2 - aic7xxx не модулем ) , как об стену горох...
[root@]# cdrecord -scanbus
Cdrecord 1.10a17 (i586-mandrake-linux-gnu) Copyright (C) 1995-2001 JЖrg Schilling
Linux sg driver version: 3.1.17
Using libscg version 'schily-0.5'
scsibus0:
	0,0,0	  0) 'QUANTUM ' 'ATLAS10K2-TY184L' 'DA40' Disk
	0,1,0	  1) *
	0,2,0	  2) *
	0,3,0	  3) *
	0,4,0	  4) *
	0,5,0	  5) *
	0,6,0	  6) *
	0,7,0	  7) *
scsibus1:
	1,0,0	100) 'HP      ' 'CD-Writer+ 8000 ' '2.3C' Removable CD-ROM
	1,1,0	101) *
	1,2,0	102) *
	1,3,0	103) *
	1,4,0	104) *
	1,5,0	105) *
	1,6,0	106) *
	1,7,0	107) *
[root@]# 

#cdrecord -v fs=6m speed=2 dev=1,0,0 /cdimage/XXXX.iso
Cdrecord 1.10a17 (i586-mandrake-linux-gnu) Copyright (C) 1995-2001 JЖrg Schilling
TOC Type: 1 = CD-ROM
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.1.17
Using libscg version 'schily-0.5'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'HP      '
Identifikation : 'CD-Writer+ 8000 '
Revision       : '2.3C'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : SWABAUDIO
Drive buf size : 1343488 = 1312 KB
FIFO size      : 6291456 = 6144 KB
Track 01: data  282 MB        
Total size:     324 MB (32:09.84) = 144738 sectors
Lout start:     324 MB (32:11/63) = 144738 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Reference speed: 2
  Is not unrestricted
  Is erasable
  ATIP start of lead in:  -12900 (97:10/00)
  ATIP start of lead out: 359849 (79:59/74)
  speed low: 0 speed high: 4
  power mult factor: 4 5
  recommended erase/write power: 3
  A2 values: 5C C6 26
Disk type:    unknown
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 215111
Starting to write CD/DVD at speed 2 in write mode for single session.
Last chance to quit, starting real write in 1 seconds.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01:   1 of 282 MB written (fifo 100%).cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 02 0F 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 06 00 00 00 00 0A 00 00 00 00 29 00 00 00
Sense Key: 0x6 Unit Attention, Segment 0
Sense Code: 0x29 Qual 0x00 (power on, reset, or bus device reset occurred) Fru 0x0
Sense flags: Blk 0 (not valid) 

Executing 'write_g1' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB:  2A 00 00 00 02 0F 00 00 1F 00
cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 02 0F 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 06 00 00 00 00 0A 00 00 00 00 29 00 00 00
Sense Key: 0x6 Unit Attention, Segment 0
Sense Code: 0x29 Qual 0x00 (power on, reset, or bus device reset occurred) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 1.900s timeout 40s

write track data: error after 1079296 bytes
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00


cdrecord: Numerical argument out of domain. Cannot send SCSI cmd via ioctl
cdrecord: Numerical argument out of domain. Cannot send SCSI cmd via ioctl
cdrecord: Numerical argument out of domain. Cannot send SCSI cmd via ioctl
cdrecord: Numerical argument out of domain. Cannot send SCSI cmd via ioctl
cdrecord: Numerical argument out of domain. Cannot send SCSI cmd via ioctl
cdrecord: Numerical argument out of domain. Cannot send SCSI cmd via ioctl
cdrecord: Numerical argument out of domain. Cannot send SCSI cmd via ioctl
cdrecord: Numerical argument out of domain. Cannot send SCSI cmd via ioctl
cdrecord: Numerical argument out of domain. Cannot send SCSI cmd via ioctl
cdrecord: Numerical argument out of domain. Cannot send SCSI cmd via ioctl
cdrecord: Numerical argument out of domain. Cannot send SCSI cmd via ioctl
cdrecord: Numerical argument out of domain. Cannot send SCSI cmd via ioctl
cdrecord: Numerical argument out of domain. Cannot send SCSI cmd via ioctl
cdrecord: Numerical argument out of domain. Cannot send SCSI cmd via ioctl
cdrecord: Numerical argument out of domain. Cannot send SCSI cmd via ioctl
cdrecord: Numerical argument out of domain. Cannot send SCSI cmd via ioctl
cdrecord: Numerical argument out of domain. Cannot send SCSI cmd via ioctl
cdrecord: Numerical argument out of domain. Cannot send SCSI cmd via ioctl
cdrecord: Numerical argument out of domain. Cannot send SCSI cmd via ioctl
cdrecord: Numerical argument out of domain. Cannot send SCSI cmd via ioctl
cdrecord: Numerical argument out of domain. Cannot send SCSI cmd via ioctl
cdrecord: Numerical argument out of domain. Cannot send SCSI cmd via ioctl
cdrecord: Numerical argument out of domain. Cannot send SCSI cmd via ioctl
cdrecord: Numerical argument out of domain. Cannot send SCSI cmd via ioctl
Fixating time:  841.198s
cdrecord: fifo had 113 puts and 18 gets.
cdrecord: fifo was 0 times empty and 10 times full, min fill was 97%.
[root@]# 

И все ... после этого диск уже ни вытащить из лотка не перегрузив машинку. Чем можно помочь?