From: Yuri Perelyaev <ynp_home@mail.ru> To: "MDK-RU" <mandrake-russian@altlinux.ru> Subject: [mdk-re] NVidia driver 2313 Date: Tue Dec 18 04:56:12 2001 Message-ID: <20011218065602.BBC59530E4@localhost.localdomain> (raw) [-- Attachment #1: Type: text/plain, Size: 476 bytes --] Привет, всем! Ну не хочет он у меня работать. Х-ы отваливаются с сообщением: (EE) NVIDIA(0): Failed to initialize the NVdriver kernel module! (EE) NVIDIA(0): *** Aborting *** (II) Unloading /usr/X11R6/lib/modules/libvgahw.a (EE) Screen(s) found, but none have a usable configuration. Драйвер собрался из tar.gz без проблем. Ядро 2.4.13-alt1-up Файл с диагностикой и конфиг прикладываю. Поможите люди добрые :) -- WBR Yuri Perelyaev ICQ 8976542 http://yp.hypermart.net [-- Attachment #2: XF86Config-4 --] [-- Type: text/plain, Size: 2180 bytes --] Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "unix/:-1" EndSection Section "ServerFlags" AllowMouseOpenFail EndSection Section "InputDevice" Identifier "Keyboard1" Driver "Keyboard" Option "AutoRepeat" "250 30" Option "XkbRules" "xfree86" Option "XkbModel" "pc105" Option "XkbLayout" "ru" Option "XkbVariant" "winkeys" Option "XkbOptions" "grp:ctrl_shift_toggle" EndSection Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "MouseManPlusPS/2" Option "Device" "/dev/psaux" Option "ZAxisMapping" "4 5" EndSection Section "Module" Load "dbe" Load "type1" Load "freetype" Load "glx" EndSection Section "Monitor" Identifier "Belinea" VendorName "Unknown" ModelName "Unknown" HorizSync 31.5-90.0 VertRefresh 50-100 # 640x480 @ 85 Hz, 43.27 kHz hsync Modeline "640x480" 36 640 696 752 832 480 481 484 509 -HSync -VSync # 800x600 @ 85 Hz, 55.84 kHz hsync Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync # 1024x768 @ 85 Hz, 70.24 kHz hsync Modeline "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync -VSync EndSection Section "Device" Identifier "NVIDIA Riva TNT2" VendorName "Unknown" BoardName "Unknown" # Driver "nv" Driver "nvidia" VideoRam 32768 Option "DPMS" "on" EndSection Section "Screen" Identifier "screen1" Device "NVIDIA Riva TNT2" Monitor "Belinea" DefaultColorDepth 24 Subsection "Display" Depth 16 Modes "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 Modes "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 32 Modes "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection EndSection Section "ServerLayout" Identifier "layout1" Screen "screen1" InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" EndSection [-- Attachment #3: err --] [-- Type: text/plain, Size: 4637 bytes --] This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs) XFree86 Version 4.1.0.1 / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 2 June 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: Linux 2.2.20-alt1-smp-secure i686 [ELF] Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Tue Dec 18 09:32:02 2001 (==) Using config file: "/etc/X11/XF86Config-4" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) ServerLayout "layout1" (**) |-->Screen "screen1" (0) (**) | |-->Monitor "Belinea" (**) | |-->Device "NVIDIA Riva TNT2" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (**) XKB: rules: "xfree86" (**) XKB: model: "pc105" (**) XKB: layout: "ru" (**) XKB: variant: "winkeys" (**) XKB: options: "grp:ctrl_shift_toggle" (**) FontPath set to "unix/:-1" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 0.1.0 (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 0.1.0 (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (--) PCI:*(1:0:0) NVidia Riva TNT2 rev 21, Mem @ 0xd2000000/24, 0xd4000000/25 (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a (II) Module freetype: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.1.9 (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so (II) Module glx: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.2313 (II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o (II) Module nvidia: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.2313 (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) NVIDIA XFree86 Driver 1.0.2313 Tue Nov 27 12:06:20 PST 2001 (II) NVIDIA: NVIDIA driver for: RIVA TNT, RIVA TNT2/TNT2 Pro, RIVA TNT2 Ultra, Vanta, RIVA TNT2 Model 64/Model 64 Pro, Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400, GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/Quadro2 Go, GeForce2 GTS/GeForce2 Pro, GeForce2 Ti, GeForce2 Ultra, Quadro2 Pro, NV17, NV17, NV17, NV17, NV17M, NV17M, NV17GL, NV17GL, NV17GL, NV17M-GL, GeForce2 Integrated GPU, GeForce3, GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC (--) Assigning device section with no busID to primary device (--) Chipset RIVA TNT2/TNT2 Pro found (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 0.1.0 (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (--) NVIDIA(0): Linear framebuffer at 0xD4000000 (--) NVIDIA(0): MMIO registers at 0xD2000000 (EE) NVIDIA(0): Failed to initialize the NVdriver kernel module! (EE) NVIDIA(0): *** Aborting *** (II) Unloading /usr/X11R6/lib/modules/libvgahw.a (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to xfree86@xfree86.org. XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0" after 0 requests (0 known processed) with 0 events remaining.
next reply other threads:[~2001-12-18 4:56 UTC|newest] Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top 2001-12-18 4:56 Yuri Perelyaev [this message] 2001-12-18 10:57 ` Michael Shigorin 2001-12-18 16:23 ` Yuri Perelyaev
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20011218065602.BBC59530E4@localhost.localdomain \ --to=ynp_home@mail.ru \ --cc=mandrake-russian@altlinux.ru \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git