[mdk-re] Re: SCSI Adaptec AVA-2903B

["Konstantin Lepikhov" <lepikhov@energya.ru>]

Hi!

Кажись нашел где собака порылась :)) Но для начала:

List:     linux-scsi
Subject:  Re: Adaptec 2940/aic7890/91: Unexpected busfree while idle
From:     "Justin T. Gibbs" <gibbs@scsiguy.com>
Date:     2001-09-06 22:50:23
[Download message RAW]

>I've added a SCSI DLT drive to a machine and it now produces the following
>sequence on startup:
>
>---
>SCSI subsystem driver Revision: 1.00
>request_module[scsi_hostadapter]: Root fs not mounted
>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.1.5
> <Adaptec 2940 Ultra2 SCSI adapter>
> aic7890/91: Wide Channel A, SCSI Id=7, 32/255 SCBs
>
>(scsi0:A:4:0): Unexpected busfree while idle
>SEQADDR == 0x173
>(scsi0:A:4:0): Unexpected busfree while idle
>SEQADDR == 0x173
>(scsi0:A:4:0): Unexpected busfree while idle
>SEQADDR == 0x173
>---
>
>No SCSI components are built as modules, so I'm not sure what's up with
>the request_module[scsi_hostadapter] call.  The kernel SCSI config is:

You must still have an initrd and a stale module.  I don't know how
the system will react to having two different versions of the driver
loaded at the same time.

The 6.1.5 version is quite old.  Version 6.2.2 was released today and
can be found here:

http://people.FreeBSD.org/~gibbs/linux/

--
Justin
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html



From: Stephen J. Gowdy (gowdy@slac.stanford.edu)
Subject: Problem with >2.4.8 kernel & (new) aic7xxx
Newsgroups: mlist.linux.scsi
View: (This is the only article in this thread) | Original Format
Date: 2001-10-09 23:40:18 PST

Hi All,
	I tried 2.4.9 and 2.4.11, both of which have a similar problem as
that reported in;

http://marc.theaimsgroup.com/?l=linux-scsi&m=99981667332018&w=2

This effects the first channel of 7895 controller. 

- Так что здесь одно решение - апгрейдить версию для aic7xxx, если не поможет,
писать автору драйвера.

ЗЫ 2Konstantin Volcov - надо, наверное, в новом релизе ядра учесть. Хотя, может
вы уже в курсе :-)