* [mdk-re] PING 127.0.0.1: NETWORK IS UNREACHABLE!!!
@ 2001-09-10 20:11 Vladimir Baranov
2001-09-10 20:20 ` Sergey Vlasov
0 siblings, 1 reply; 4+ messages in thread
From: Vladimir Baranov @ 2001-09-10 20:11 UTC (permalink / raw)
To: mandrake-russian
Hi, Brothers,
Проблемы с loopback под Linux Mandrake 2.2 RE Spring 2001.
Ping 127.0.0.1 выдаёт Connect: Network is unreachable.
Интерфейс loopback вроде-как есть:
ifconfig -a
lo Link encap: Local loopback
LOOPBACK MTU: 3924 Metric: 1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 frame:0
collections:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
но он, похоже, не работает.
netstat -r:
kernel IP routing table
<ПУСТО>
Попытка route add localhost даёт
SIOCADDRT: No such device.
NEED HELP.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [mdk-re] PING 127.0.0.1: NETWORK IS UNREACHABLE!!!
2001-09-10 20:11 [mdk-re] PING 127.0.0.1: NETWORK IS UNREACHABLE!!! Vladimir Baranov
@ 2001-09-10 20:20 ` Sergey Vlasov
2001-09-11 7:36 ` Vladimir Baranov
0 siblings, 1 reply; 4+ messages in thread
From: Sergey Vlasov @ 2001-09-10 20:20 UTC (permalink / raw)
To: mandrake-russian
On Mon, 10 Sep 2001 22:18:23 +0600
"Vladimir Baranov" <baranoff@hotbox.ru> wrote:
> Проблемы с loopback под Linux Mandrake 2.2 RE Spring 2001.
>
> Ping 127.0.0.1 выдаёт Connect: Network is unreachable.
>
> Интерфейс loopback вроде-как есть:
>
> ifconfig -a
>
> lo Link encap: Local loopback
> LOOPBACK MTU: 3924 Metric: 1
А где UP?
/sbin/ifup lo
А вообще в /etc/sysconfig/network-scripts/ifcfg-lo должно быть:
DEVICE=lo
IPADDR=127.0.0.1
NETMASK=255.0.0.0
NETWORK=127.0.0.0
# If you're having problems with gated making 127.0.0.0/8 a martian,
# you can change this to something else (255.255.255.255, for example)
BROADCAST=127.255.255.255
ONBOOT=yes
NAME=loopback
И запустить "chkconfig network on".
^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: [mdk-re] PING 127.0.0.1: NETWORK IS UNREACHABLE!!!
2001-09-10 20:20 ` Sergey Vlasov
@ 2001-09-11 7:36 ` Vladimir Baranov
2001-09-11 12:59 ` Re[2]: " Serge Skorokhodov
0 siblings, 1 reply; 4+ messages in thread
From: Vladimir Baranov @ 2001-09-11 7:36 UTC (permalink / raw)
To: mandrake-russian
Вообще-то ifcfg-lo есть как здесь. И ifup lo включает loopback. Я не могу
найти причину, почему интерфейс не включается при запуске. Т.е., каждый раз
после
перезагрузки поддержку приходится кнопить в терминале. А где это прописать в
скриптах, или в LinuxConfe?
-----Original Message-----
From: mandrake-russian-admin@altlinux.ru
[mailto:mandrake-russian-admin@altlinux.ru]On Behalf Of Sergey Vlasov
Sent: Monday, September 10, 2001 10:33 PM
To: mandrake-russian@altlinux.ru
Subject: Re: [mdk-re] PING 127.0.0.1: NETWORK IS UNREACHABLE!!!
On Mon, 10 Sep 2001 22:18:23 +0600
"Vladimir Baranov" <baranoff@hotbox.ru> wrote:
> Проблемы с loopback под Linux Mandrake 2.2 RE Spring 2001.
>
> Ping 127.0.0.1 выдаёт Connect: Network is unreachable.
>
> Интерфейс loopback вроде-как есть:
>
> ifconfig -a
>
> lo Link encap: Local loopback
> LOOPBACK MTU: 3924 Metric: 1
А где UP?
/sbin/ifup lo
А вообще в /etc/sysconfig/network-scripts/ifcfg-lo должно быть:
DEVICE=lo
IPADDR=127.0.0.1
NETMASK=255.0.0.0
NETWORK=127.0.0.0
# If you're having problems with gated making 127.0.0.0/8 a martian,
# you can change this to something else (255.255.255.255, for example)
BROADCAST=127.255.255.255
ONBOOT=yes
NAME=loopback
И запустить "chkconfig network on".
_______________________________________________
Mandrake-russian mailing list
Mandrake-russian@altlinux.ru
http://altlinux.ru/mailman/listinfo/mandrake-russian
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re[2]: [mdk-re] PING 127.0.0.1: NETWORK IS UNREACHABLE!!!
2001-09-11 7:36 ` Vladimir Baranov
@ 2001-09-11 12:59 ` Serge Skorokhodov
0 siblings, 0 replies; 4+ messages in thread
From: Serge Skorokhodov @ 2001-09-11 12:59 UTC (permalink / raw)
To: Vladimir Baranov
Здравствуйте!
VB> Вообще-то ifcfg-lo есть как здесь. И ifup lo включает
VB> loopback. Я не могу найти причину, почему интерфейс не
VB> включается при запуске. Т.е., каждый раз после перезагрузки
VB> поддержку приходится кнопить в терминале. А где это прописать
VB> в скриптах, или в LinuxConfe?
Если память мне не изменяет, то в DrakConf надо разрешить
поддержку сети. А вот в каком скрипте надо прописать network=yes
(или как-то похоже) -- с ходу тоже не вспомню:(, но где-то в /etc
точно есть, бо сам когда-то искал, после того, как поставил без
поддержки сети:)
<skip>
Serge Skorokhodov aka suralis
11.09.2001 suralis-s@mtu-net.ru
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2001-09-11 12:59 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-09-10 20:11 [mdk-re] PING 127.0.0.1: NETWORK IS UNREACHABLE!!! Vladimir Baranov
2001-09-10 20:20 ` Sergey Vlasov
2001-09-11 7:36 ` Vladimir Baranov
2001-09-11 12:59 ` Re[2]: " Serge Skorokhodov
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git