* [mdk-re] vmware and existing partitions @ 2001-08-24 13:52 Pavel Marakhovsky 2001-08-24 18:56 ` cornet 0 siblings, 1 reply; 9+ messages in thread From: Pavel Marakhovsky @ 2001-08-24 13:52 UTC (permalink / raw) To: Linux Russian Mailing List Привет! Как все таки заставить видеть vmware существующие разделы? Указал ему как raw партицию. При загрузке vmware видит теперь еще один винт (в биосе почему-то его размер равен 10gb - это весь винт). В виндах он только в Системе, как ide type 8 (кажется так), а в проводнике он не виден. Что надо сделать чтобы винды нормально увидели винт? А то через дискетку переносить информацую - это как-то долго:) -- WBW, Unatine e-mail: unatine@narod.ru JID: unatine@jabber.[org,com] Now playing: Horie Yui - Happy happy rice shower ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [mdk-re] vmware and existing partitions 2001-08-24 13:52 [mdk-re] vmware and existing partitions Pavel Marakhovsky @ 2001-08-24 18:56 ` cornet 2001-08-24 23:17 ` Re[2]: " Sergey Sokolov 2001-08-25 12:49 ` Pavel Marakhovsky 0 siblings, 2 replies; 9+ messages in thread From: cornet @ 2001-08-24 18:56 UTC (permalink / raw) To: mandrake-russian Pavel Marakhovsky wrote: > > Привет! > > Как все таки заставить видеть vmware существующие разделы? Указал ему как raw партицию. > При загрузке vmware видит теперь еще один винт (в биосе почему-то его размер равен 10gb - это > весь винт). В виндах он только в Системе, как ide type 8 (кажется так), а в проводнике он не виден. > > Что надо сделать чтобы винды нормально увидели винт? А то через дискетку переносить > информацую - это как-то долго:) "Винт" и "Раздел" Варь по любому видит как Винт. Если хотите переносить файлы между основной и гостевой осями - поднимите Самбу и обращайтесь из Вари к собственной самбе. Цепляйте свой хоумник на букву диска и работайте наздоровье. И всех то делов :-) Прошу заметить - это _штатный_ способ работы, и при автоматической конфигурации Варь пытается сама все это настроить. -- ******** FIRE & STEEL ******** ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re[2]: [mdk-re] vmware and existing partitions 2001-08-24 18:56 ` cornet @ 2001-08-24 23:17 ` Sergey Sokolov 2001-08-25 12:49 ` Gosha 2001-08-25 13:53 ` cornet 2001-08-25 12:49 ` Pavel Marakhovsky 1 sibling, 2 replies; 9+ messages in thread From: Sergey Sokolov @ 2001-08-24 23:17 UTC (permalink / raw) To: cornet Hello cornet, Friday, August 24, 2001, 2:29:48 PM, you wrote: c> Если хотите переносить файлы между основной и гостевой осями - c> поднимите Самбу и обращайтесь из Вари к собственной самбе. Сколько раз уже вижу в рассылке эту фразу... Как её поднимают? :) c> Прошу заметить - это _штатный_ способ работы, и при c> автоматической конфигурации Варь пытается сама все это настроить. -- Best regards, Sergey mailto:renar@inbox.ru Silence... ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Re[2]: [mdk-re] vmware and existing partitions 2001-08-24 23:17 ` Re[2]: " Sergey Sokolov @ 2001-08-25 12:49 ` Gosha 2001-08-25 13:53 ` cornet 1 sibling, 0 replies; 9+ messages in thread From: Gosha @ 2001-08-25 12:49 UTC (permalink / raw) To: mandrake-russian Hi! On Fri, 24 Aug 2001 19:59:01 +0400 Sergey Sokolov <renar@inbox.ru> wrote: > c> Если хотите переносить файлы между основной и гостевой осями - > c> поднимите Самбу и обращайтесь из Вари к собственной самбе. > > Сколько раз уже вижу в рассылке эту фразу... > Как её поднимают? :) Самбу? Очень просто. Настроив конфигурационный файл, сказать, к примеру, service smb start. :-))) -- Best regards! Igor Solovyov Zlatoust, Russia ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [mdk-re] vmware and existing partitions 2001-08-24 23:17 ` Re[2]: " Sergey Sokolov 2001-08-25 12:49 ` Gosha @ 2001-08-25 13:53 ` cornet 2001-08-25 19:36 ` Pavel Marakhovsky 1 sibling, 1 reply; 9+ messages in thread From: cornet @ 2001-08-25 13:53 UTC (permalink / raw) To: mandrake-russian Sergey Sokolov wrote: > > Hello cornet, > > Friday, August 24, 2001, 2:29:48 PM, you wrote: > > c> Если хотите переносить файлы между основной и гостевой осями - > c> поднимите Самбу и обращайтесь из Вари к собственной самбе. > > Сколько раз уже вижу в рассылке эту фразу... > Как её поднимают? :) Кого? Самбу?? В этой рассылке порядка 10-15% реплик относится именно к Самбе, если внимательно все читать можно стать прям таки экспертом по этому сервису! :-)) Даю последовательность команд: man samba man smb.conf vi (mcedit, vim, emacs) /etc/smb.conf или /etc/samba/smb.conf service samba start Вы становитесь сервером в стиле MSNetwork, пусть да же для localhost если сетевухи нету. И к этому самому серверу обращаетесь гостевой виндой из под Вари. Все предельно просто, а главное очень надежно. > c> Прошу заметить - это _штатный_ способ работы, и при > c> автоматической конфигурации Варь пытается сама все это настроить. > > -- > Best regards, > Sergey mailto:renar@inbox.ru > > Silence... > > _______________________________________________ > Mandrake-russian mailing list > Mandrake-russian@altlinux.ru > http://altlinux.ru/mailman/listinfo/mandrake-russian -- ******** FIRE & STEEL ******** ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [mdk-re] vmware and existing partitions 2001-08-25 13:53 ` cornet @ 2001-08-25 19:36 ` Pavel Marakhovsky 2001-08-26 1:11 ` cornet 0 siblings, 1 reply; 9+ messages in thread From: Pavel Marakhovsky @ 2001-08-25 19:36 UTC (permalink / raw) To: mandrake-russian On Sat, 25 Aug 2001 12:45:56 +0400 cornet <cornet@zmail.ru> wrote: > Sergey Sokolov wrote: > > > > Hello cornet, > > > > Friday, August 24, 2001, 2:29:48 PM, you wrote: > > > > c> Если хотите переносить файлы между основной и гостевой > осями - > > c> поднимите Самбу и обращайтесь из Вари к собственной самбе. > > > > Сколько раз уже вижу в рассылке эту фразу... > > Как её поднимают? :) > > Кого? Самбу?? В этой рассылке порядка 10-15% реплик относится > именно к Самбе, если внимательно все читать можно стать прям > таки экспертом по этому сервису! :-)) Раньше как-то не надо было, и я все треды по этому поводу благополучно пропускал:)) А вот сейчас... > Даю последовательность команд: > man samba > man smb.conf > vi (mcedit, vim, emacs) /etc/smb.conf или /etc/samba/smb.conf > service samba start Все что понял настроил и ручками и через swat. Только вот nmbd стартует, а smbd нет: [2001/08/25 19:31:21, 1] smbd/server.c:main(641) smbd version 2.0.7 started. Copyright Andrew Tridgell 1992-1998 [2001/08/25 19:31:22, 1] smbd/files.c:file_init(216) file_init: Information only: requested 10000 open files, 1014 are available. [2001/08/25 19:31:23, 0] lib/util_sock.c:open_socket_in(863) bind failed on port 139 socket_addr=0.0.0.0 (Address already in use) Не знаю почему он не хочет использовать этот порт, но он свободен: [root@localhost samba]# nmap -sT -P0 -p 1-65000 127.0.0.1 Starting nmap V. 2.54BETA22 ( www.insecure.org/nmap/ ) Strange read error from 127.0.0.1 (104): Operation now in progress Strange read error from 127.0.0.1 (104): Operation now in progress Interesting ports on localhost (127.0.0.1): (The 64991 ports scanned but not shown below are in state: closed) Port State Service 25/tcp open smtp 53/tcp open domain 631/tcp open cups 901/tcp open samba-swat 2444/tcp open unknown 2628/tcp open unknown 4076/tcp open unknown 6000/tcp open X11 8000/tcp open unknown [root@localhost samba]# nmap -sU -P0 -p 1-65000 127.0.0.1 Starting nmap V. 2.54BETA22 ( www.insecure.org/nmap/ ) Interesting ports on localhost (127.0.0.1): (The 64997 ports scanned but not shown below are in state: closed) Port State Service 53/udp open domain 137/udp open netbios-ns 138/udp open netbios-dgm > Вы становитесь сервером в стиле MSNetwork, пусть да же для > localhost если сетевухи нету. И к этому самому серверу > обращаетесь гостевой виндой из под Вари. Все предельно просто, > а главное очень надежно. Принцип-то понятен, а вот настроить.... Может вышлите свой конфиг для самбы (особенно если он работает с vmware) -- WBW, Unatine e-mail: unatine@narod.ru JID: unatine@jabber.[org,com] Now playing: Kimura Yuki - Fall in You ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [mdk-re] vmware and existing partitions 2001-08-25 19:36 ` Pavel Marakhovsky @ 2001-08-26 1:11 ` cornet 2001-08-26 17:58 ` Pavel Marakhovsky 0 siblings, 1 reply; 9+ messages in thread From: cornet @ 2001-08-26 1:11 UTC (permalink / raw) To: mandrake-russian Pavel Marakhovsky wrote: > skip. > > Вы становитесь сервером в стиле MSNetwork, пусть да же для > > localhost если сетевухи нету. И к этому самому серверу > > обращаетесь гостевой виндой из под Вари. Все предельно просто, > > а главное очень надежно. > Принцип-то понятен, а вот настроить.... > > Может вышлите свой конфиг для самбы (особенно если он работает с vmware) Дефалтный конфиг из поставки samba**.rpm работает, проверено. Причем этот конфиг нисколько не отличается от того, который предназначен для работы с реальными клиентскими тачками. -- ******** FIRE & STEEL ******** ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [mdk-re] vmware and existing partitions 2001-08-26 1:11 ` cornet @ 2001-08-26 17:58 ` Pavel Marakhovsky 0 siblings, 0 replies; 9+ messages in thread From: Pavel Marakhovsky @ 2001-08-26 17:58 UTC (permalink / raw) To: mandrake-russian On Sun, 26 Aug 2001 00:10:51 +0400 cornet <cornet@zmail.ru> wrote: > > > Вы становитесь сервером в стиле MSNetwork, пусть да же для > > > localhost если сетевухи нету. И к этому самому серверу > > > обращаетесь гостевой виндой из под Вари. Все предельно просто, > > > а главное очень надежно. > > Принцип-то понятен, а вот настроить.... > > > > Может вышлите свой конфиг для самбы (особенно если он > работает с vmware) > > Дефалтный конфиг из поставки samba**.rpm работает, проверено. > Причем этот конфиг нисколько не отличается от того, который > предназначен для работы с реальными клиентскими тачками. Специально вытащил из samba-common конфиг. Не работает. samba не стартует. Запускается только nmbd и все, а smbd не хочет: [2001/08/25 19:31:21, 1] smbd/server.c:main(641) smbd version 2.0.7 started. Copyright Andrew Tridgell 1992-1998 [2001/08/25 19:31:22, 1] smbd/files.c:file_init(216) file_init: Information only: requested 10000 open files, 1014 are available. [2001/08/25 19:31:23, 0] lib/util_sock.c:open_socket_in(863) bind failed on port 139 socket_addr=0.0.0.0 (Address already in use) Это он пишет в log.smb. Порт про который он спрашивает свободен, и tcp, и udp (проверял nmapом) -- WBW, Unatine e-mail: unatine@narod.ru JID: unatine@jabber.[org,com] Now playing: Chisa Yokoyama - Haru ga Kuru ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [mdk-re] vmware and existing partitions 2001-08-24 18:56 ` cornet 2001-08-24 23:17 ` Re[2]: " Sergey Sokolov @ 2001-08-25 12:49 ` Pavel Marakhovsky 1 sibling, 0 replies; 9+ messages in thread From: Pavel Marakhovsky @ 2001-08-25 12:49 UTC (permalink / raw) To: mandrake-russian On Fri, 24 Aug 2001 14:29:48 +0400 cornet <cornet@zmail.ru> wrote: > > Как все таки заставить видеть vmware существующие разделы? Указал ему как raw партицию. > > При загрузке vmware видит теперь еще один винт (в биосе почему-то его размер равен 10gb - это > > весь винт). В виндах он только в Системе, как ide type 8 (кажется так), а в проводнике он не виден. > > > > Что надо сделать чтобы винды нормально увидели винт? А то через дискетку переносить > > информацую - это как-то долго:) > > "Винт" и "Раздел" Варь по любому видит как Винт. > Если хотите переносить файлы между основной и гостевой осями - > поднимите Самбу и обращайтесь из Вари к собственной самбе. > Цепляйте свой хоумник на букву диска и работайте наздоровье. И > всех то делов :-) А можно кратко, как это сделать? Что поставить и etc. > Прошу заметить - это _штатный_ способ работы, и при > автоматической конфигурации Варь пытается сама все это > настроить. Т.е. при первой настройке она должна была сделать это сама? (Наверно я где-то что-то пропустил...) -- WBW, Unatine e-mail: unatine@narod.ru JID: unatine@jabber.[org,com] Now playing: - Love Somebody ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2001-08-26 17:58 UTC | newest] Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2001-08-24 13:52 [mdk-re] vmware and existing partitions Pavel Marakhovsky 2001-08-24 18:56 ` cornet 2001-08-24 23:17 ` Re[2]: " Sergey Sokolov 2001-08-25 12:49 ` Gosha 2001-08-25 13:53 ` cornet 2001-08-25 19:36 ` Pavel Marakhovsky 2001-08-26 1:11 ` cornet 2001-08-26 17:58 ` Pavel Marakhovsky 2001-08-25 12:49 ` Pavel Marakhovsky
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git