* [mdk-re] ОТПРАВКА ФАЙЛОВ ПО КРОНУ @ 2001-08-23 11:41 Volkov Serge 2001-08-23 11:46 ` [mdk-re] " cornet 2001-08-24 19:02 ` [mdk-re] ïôðòá÷ëá æáêìï÷ ðï ëòïîõ Russu V.F. 0 siblings, 2 replies; 10+ messages in thread From: Volkov Serge @ 2001-08-23 11:41 UTC (permalink / raw) To: mandrake-re Доброго времени суток Стоит задача отправка фалов из под Unix при помощи crond, на машины с операционной системой Win98 и там соотвественно прочтение их Помогите определиться с программами, так как если я правильно понимаю при отправке файлов необходимо их кодировать UUcode/ -- With best wishes, Volkov Serge Network Administrator/Security Administrator ^ permalink raw reply [flat|nested] 10+ messages in thread
* [mdk-re] Re: [mdk-re] ОТПРАВКА ФАЙЛОВ ПО КРОНУ 2001-08-23 11:41 [mdk-re] ОТПРАВКА ФАЙЛОВ ПО КРОНУ Volkov Serge @ 2001-08-23 11:46 ` cornet 2001-08-23 14:29 ` Volkov Serge 2001-08-24 19:02 ` [mdk-re] ïôðòá÷ëá æáêìï÷ ðï ëòïîõ Russu V.F. 1 sibling, 1 reply; 10+ messages in thread From: cornet @ 2001-08-23 11:46 UTC (permalink / raw) To: mandrake-russian Volkov Serge wrote: > > Доброго времени суток > > Стоит задача отправка фалов из под Unix при помощи crond, на машины с операционной системой Win98 и там соотвественно прочтение их > > Помогите определиться с программами, так как если я правильно понимаю при отправке файлов необходимо их кодировать UUcode/ Зачем??!! Пишите шелл скрипт, который через smbmount подключается к маздаю, наливает туда файлы, отключается через umount. И скармливаете этот скрипт крону. Все. -- ******** FIRE & STEEL ******** ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [mdk-re] Re: [mdk-re] ОТПРАВКА ФАЙЛОВ ПО КРОНУ 2001-08-23 11:46 ` [mdk-re] " cornet @ 2001-08-23 14:29 ` Volkov Serge 2001-08-23 15:43 ` Vyt 2001-08-23 16:39 ` Лоивский М.А. 0 siblings, 2 replies; 10+ messages in thread From: Volkov Serge @ 2001-08-23 14:29 UTC (permalink / raw) To: mandrake-russian On Thu, 23 Aug 2001 11:48:03 +0400 cornet <cornet@zmail.ru> wrote: > Volkov Serge wrote: > > > > Доброго времени суток > > > > Стоит задача отправка фалов из под Unix при помощи crond, на машины с операционной системой Win98 и там соотвественно прочтение их > > > > Помогите определиться с программами, так как если я правильно понимаю при отправке файлов необходимо их кодировать UUcode/ > > Зачем??!! > > Пишите шелл скрипт, который через smbmount подключается к маздаю, > наливает туда файлы, отключается через umount. И скармливаете > этот скрипт крону. > Все. А если у меня машина в DMZ -- With best wishes, Volkov Serge Network Administrator/Security Administrator ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [mdk-re] Re: [mdk-re] ОТПРАВКА ФАЙЛОВ ПО КРОНУ 2001-08-23 14:29 ` Volkov Serge @ 2001-08-23 15:43 ` Vyt 2001-08-23 16:07 ` Volkov Serge 2001-08-23 16:39 ` Лоивский М.А. 1 sibling, 1 reply; 10+ messages in thread From: Vyt @ 2001-08-23 15:43 UTC (permalink / raw) To: mandrake-russian On Thu, 23 Aug 2001 12:23:21 +0400 "Volkov Serge" <vserge@menatepspb.msk.ru> wrote: <skipped> > > Пишите шелл скрипт, который через smbmount подключается к маздаю, > > наливает туда файлы, отключается через umount. И скармливаете > > этот скрипт крону. > > Все. > > А если у меня машина в DMZ [?] И что это меняет? <skipped> -- Regards, Vyt mailto: vyt@vzljot.ru JID: vyt@jabber.org ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [mdk-re] Re: [mdk-re] ОТПРАВКА ФАЙЛОВ ПО КРОНУ 2001-08-23 15:43 ` Vyt @ 2001-08-23 16:07 ` Volkov Serge 2001-08-23 16:19 ` Vyt 2001-08-23 16:22 ` cornet 0 siblings, 2 replies; 10+ messages in thread From: Volkov Serge @ 2001-08-23 16:07 UTC (permalink / raw) To: mandrake-russian On Thu, 23 Aug 2001 15:37:36 +0400 Vyt <vyt@vzljot.ru> wrote: > On Thu, 23 Aug 2001 12:23:21 +0400 > "Volkov Serge" <vserge@menatepspb.msk.ru> wrote: > > <skipped> > > > > Пишите шелл скрипт, который через smbmount подключается к маздаю, > > > наливает туда файлы, отключается через umount. И скармливаете > > > этот скрипт крону. > > > Все. > > > > А если у меня машина в DMZ > [?] > > И что это меняет? Если не ошибаюсь не очень хорошо светить в интеренет мою SMB сеть. и вообще не хочется ставить на сервер samba -- With best wishes, Volkov Serge Network Administrator/Security Administrator ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [mdk-re] Re: [mdk-re] ОТПРАВКА ФАЙЛОВ ПО КРОНУ 2001-08-23 16:07 ` Volkov Serge @ 2001-08-23 16:19 ` Vyt 2001-08-23 16:22 ` cornet 1 sibling, 0 replies; 10+ messages in thread From: Vyt @ 2001-08-23 16:19 UTC (permalink / raw) To: mandrake-russian On Thu, 23 Aug 2001 16:07:54 +0400 "Volkov Serge" <vserge@menatepspb.msk.ru> wrote: <skipped> > > > А если у меня машина в DMZ > > [?] > > > > И что это меняет? > > Если не ошибаюсь не очень хорошо светить в интеренет мою SMB сеть. > и вообще не хочется ставить на сервер samba Да, я тоже долго держался ;) Если интерфейсов несколько, можно на DMZ-товом запретить с помощью ipchains порты 137-139 и привязать самбу только на внутренний. Думаю, что с виндой проще всего общаться по smb :) <skipped> -- Regards, Vyt mailto: vyt@vzljot.ru JID: vyt@jabber.org ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [mdk-re] Re: [mdk-re] ОТПРАВКА ФАЙЛОВ ПО КРОНУ 2001-08-23 16:07 ` Volkov Serge 2001-08-23 16:19 ` Vyt @ 2001-08-23 16:22 ` cornet 1 sibling, 0 replies; 10+ messages in thread From: cornet @ 2001-08-23 16:22 UTC (permalink / raw) To: mandrake-russian Volkov Serge wrote: > > On Thu, 23 Aug 2001 15:37:36 +0400 > Vyt <vyt@vzljot.ru> wrote: > > > On Thu, 23 Aug 2001 12:23:21 +0400 > > "Volkov Serge" <vserge@menatepspb.msk.ru> wrote: > > > > <skipped> > > > > > > Пишите шелл скрипт, который через smbmount подключается к маздаю, > > > > наливает туда файлы, отключается через umount. И скармливаете > > > > этот скрипт крону. > > > > Все. > > > > > > А если у меня машина в DMZ > > [?] > > > > И что это меняет? > > Если не ошибаюсь не очень хорошо светить в интеренет мою SMB сеть. > и вообще не хочется ставить на сервер samba Да, не хорошо. А Вы подумайте, Вы хотите передать на некую машину некие файлы в произвольный момент времени, причем на машину, дистанционно практически неуправляему. Если бы приемником был юникс, то для пущей секюрности я бы посоветовал сначала через expect зайти туда шеллом, поднять сервис, подцепиться к этому сервису, налить/слить, отцепиться, опустить сервис, отлогиниться от шелла. Но с маздаем такой финт не пройдет. Вам полюбому придется стационарно вывесить какойнть сервис и слушать порт ожидая коннекта от юниксового сервака. А какие сервисы в виндах наименее дырявые? Может быть попробовать какойнть порт приличного ftp демона под винды подсадить? Если все же работать через SMB, то на сервере потребуется _только_ smb-client и все, поднимать сам сервис совершенно не нужно. -- ******** FIRE & STEEL ******** ^ permalink raw reply [flat|nested] 10+ messages in thread
* [mdk-re] Re: [mdk-re] ОТПРАВКА ФАЙЛОВ ПО КРОНУ 2001-08-23 14:29 ` Volkov Serge 2001-08-23 15:43 ` Vyt @ 2001-08-23 16:39 ` Лоивский М.А. 1 sibling, 0 replies; 10+ messages in thread From: Лоивский М.А. @ 2001-08-23 16:39 UTC (permalink / raw) To: mandrake-russian > > Пишите шелл скрипт, который через smbmount подключается к маздаю, > > наливает туда файлы, отключается через umount. И скармливаете > > этот скрипт крону. Кстати, так и остался неотвеченным вопрос: как принудительно сделать umount с открытыми файлами (-f не предлагать - ругается, что устройство занято)? Может кто знает еще метод? ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [mdk-re] ïôðòá÷ëá æáêìï÷ ðï ëòïîõ 2001-08-23 11:41 [mdk-re] ОТПРАВКА ФАЙЛОВ ПО КРОНУ Volkov Serge 2001-08-23 11:46 ` [mdk-re] " cornet @ 2001-08-24 19:02 ` Russu V.F. 2001-08-24 19:23 ` [mdk-re] ОТПРАВКА ФАЙЛОВ ПО КРОНУ Volkov Serge 1 sibling, 1 reply; 10+ messages in thread From: Russu V.F. @ 2001-08-24 19:02 UTC (permalink / raw) To: mandrake-russian-admin@altlinux.ru Hello mandrake-russian-admin, Thursday, August 23, 2001, 1:41:36 PM, you wrote: > Доброго времени суток > Стоит задача отправка фалов из под Unix при помощи crond, на машины с операционной системой Win98 и там соотвественно прочтение их > Помогите определиться с программами, так как если я правильно понимаю при отправке файлов необходимо их кодировать UUcode/ uuencode file_name.ext file_name.ext | mail user@domain.ru -s "subject" -- ОП ТюменьЭнергоСпецРемонт Системный администратор Руссу В.Ф. e-mail: ruwa@psrp.te.ru phone: (3462)76-40-56 ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [mdk-re] ОТПРАВКА ФАЙЛОВ ПО КРОНУ 2001-08-24 19:02 ` [mdk-re] ïôðòá÷ëá æáêìï÷ ðï ëòïîõ Russu V.F. @ 2001-08-24 19:23 ` Volkov Serge 0 siblings, 0 replies; 10+ messages in thread From: Volkov Serge @ 2001-08-24 19:23 UTC (permalink / raw) To: mandrake-russian On Fri, 24 Aug 2001 09:10:46 +0600 "Russu V.F." <ruwa@psrp.te.ru> wrote: > Hello mandrake-russian-admin, > > Thursday, August 23, 2001, 1:41:36 PM, you wrote: > > > Доброго времени суток > > > Стоит задача отправка фалов из под Unix при помощи crond, на машины с операционной системой Win98 и там соотвественно прочтение их > > > Помогите определиться с программами, так как если я правильно понимаю при отправке файлов необходимо их кодировать UUcode/ > > uuencode file_name.ext file_name.ext | mail user@domain.ru -s "subject" > а винда поймет при получении -- With best wishes, Volkov Serge Network Administrator/Security Administrator ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2001-08-24 19:23 UTC | newest] Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2001-08-23 11:41 [mdk-re] ОТПРАВКА ФАЙЛОВ ПО КРОНУ Volkov Serge 2001-08-23 11:46 ` [mdk-re] " cornet 2001-08-23 14:29 ` Volkov Serge 2001-08-23 15:43 ` Vyt 2001-08-23 16:07 ` Volkov Serge 2001-08-23 16:19 ` Vyt 2001-08-23 16:22 ` cornet 2001-08-23 16:39 ` Лоивский М.А. 2001-08-24 19:02 ` [mdk-re] ïôðòá÷ëá æáêìï÷ ðï ëòïîõ Russu V.F. 2001-08-24 19:23 ` [mdk-re] ОТПРАВКА ФАЙЛОВ ПО КРОНУ Volkov Serge
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git