* [mdk-re] Изменить параметры загрузки @ 2001-08-19 13:45 Sergey Sokolov 2001-08-19 14:01 ` Sergey Vlasov 2001-08-19 14:02 ` [mdk-re] Изменить параметры загрузки Vyt 0 siblings, 2 replies; 13+ messages in thread From: Sergey Sokolov @ 2001-08-19 13:45 UTC (permalink / raw) To: mandrake-russian Добрый день! Приобрёл новый жёсткий диск и занялся переносом систем. В общем и целом всё получилось, только Win2K потеряла свой своп, пришлось делать восстановительную установку. Linux На этой машине я грузил с дискеты (по некоторым причинам мультизагрузчик установить нельзя) и теперь, естественно, lilo с дискеты не находит раздела. Он был hdb3, стал hda4. Какие переметры задать при загрузке, чтобы система загрузилась в новом разделе? -- Best regards, Sergey mailto:renar@inbox.ru Silence... ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [mdk-re] Изменить параметры загрузки 2001-08-19 13:45 [mdk-re] Изменить параметры загрузки Sergey Sokolov @ 2001-08-19 14:01 ` Sergey Vlasov 2001-08-19 18:36 ` [mdk-re] Re[2]: " Sergey Sokolov 2001-08-19 21:18 ` Sergey Sokolov 2001-08-19 14:02 ` [mdk-re] Изменить параметры загрузки Vyt 1 sibling, 2 replies; 13+ messages in thread From: Sergey Vlasov @ 2001-08-19 14:01 UTC (permalink / raw) To: mandrake-russian On Sun, 19 Aug 2001 13:46:22 +0400 Sergey Sokolov <renar@inbox.ru> wrote: > Приобрёл новый жёсткий диск и занялся переносом систем. В общем и > целом всё получилось, только Win2K потеряла свой своп, пришлось делать > восстановительную установку. Linux На этой машине я грузил с дискеты > (по некоторым причинам мультизагрузчик установить нельзя) и теперь, > естественно, lilo с дискеты не находит раздела. Он был hdb3, стал > hda4. Какие переметры задать при загрузке, чтобы система загрузилась в > новом разделе? root=/dev/hda4 failsafe Кстати, можно установить загрузку Linux из меню загрузчика Win2K. ^ permalink raw reply [flat|nested] 13+ messages in thread
* [mdk-re] Re[2]: [mdk-re] Изменить параметры загрузки 2001-08-19 14:01 ` Sergey Vlasov @ 2001-08-19 18:36 ` Sergey Sokolov 2001-08-19 19:00 ` [mdk-re] " Mikhail Nikitin 2001-08-19 19:23 ` Sergey Vlasov 2001-08-19 21:18 ` Sergey Sokolov 1 sibling, 2 replies; 13+ messages in thread From: Sergey Sokolov @ 2001-08-19 18:36 UTC (permalink / raw) To: Sergey Vlasov Hello Sergey, Sunday, August 19, 2001, 2:01:34 PM, you wrote: >> естественно, lilo с дискеты не находит раздела. Он был hdb3, стал >> hda4. Какие переметры задать при загрузке, чтобы система загрузилась в >> новом разделе? SV> root=/dev/hda4 failsafe SV> Кстати, можно установить загрузку Linux из меню загрузчика Win2K. Зная дружбу этих систем, должно быть, что-то хакерское? Что, если не секрет? Best regards, Sergey mailto:renar@inbox.ru Silence... ^ permalink raw reply [flat|nested] 13+ messages in thread
* [mdk-re] Re: [mdk-re] Re[2]: [mdk-re] Изменить параметры загрузки 2001-08-19 18:36 ` [mdk-re] Re[2]: " Sergey Sokolov @ 2001-08-19 19:00 ` Mikhail Nikitin 2001-08-19 19:23 ` Sergey Vlasov 1 sibling, 0 replies; 13+ messages in thread From: Mikhail Nikitin @ 2001-08-19 19:00 UTC (permalink / raw) To: mandrake-russian > >> естественно, lilo с дискеты не находит раздела. Он был hdb3, стал > >> hda4. Какие переметры задать при загрузке, чтобы система загрузилась в > >> новом разделе? > > SV> root=/dev/hda4 failsafe > > SV> Кстати, можно установить загрузку Linux из меню загрузчика Win2K. > > Зная дружбу этих систем, должно быть, что-то хакерское? Что, если не > секрет? > Linux+NT-Loader mini-howto Системы эти прекрасно дружат. Вопрос в прямости девайса /dev/hands. Вообще установка Linux в меню W2k дело довольно тривиальное ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [mdk-re] Re[2]: [mdk-re] Изменить параметры загрузки 2001-08-19 18:36 ` [mdk-re] Re[2]: " Sergey Sokolov 2001-08-19 19:00 ` [mdk-re] " Mikhail Nikitin @ 2001-08-19 19:23 ` Sergey Vlasov 2001-08-22 21:24 ` Michael Shigorin 1 sibling, 1 reply; 13+ messages in thread From: Sergey Vlasov @ 2001-08-19 19:23 UTC (permalink / raw) To: mandrake-russian On Sun, 19 Aug 2001 18:37:27 +0400 Sergey Sokolov <renar@inbox.ru> wrote: > Hello Sergey, > > Sunday, August 19, 2001, 2:01:34 PM, you wrote: > > > >> естественно, lilo с дискеты не находит раздела. Он был hdb3, стал > >> hda4. Какие переметры задать при загрузке, чтобы система загрузилась в > >> новом разделе? > > SV> root=/dev/hda4 failsafe > > SV> Кстати, можно установить загрузку Linux из меню загрузчика Win2K. > > Зная дружбу этих систем, должно быть, что-то хакерское? Что, если не > секрет? 1. Ставим Linux-овский загрузчик (LILO или GRUB) не в MBR, а в первый сектор раздела Linux. Для LILO это делается прописыванием в /etc/lilo.conf строки boot=/dev/hda# и запуском lilo. Для GRUB в Spring - нужно соответствующим образом поправить файл /boot/grub/install.sh (в команде install после опции d поставить нужный раздел в формате GRUB) и выполнить sh /boot/grub/install.sh. 2. Теперь нужно скопировать этот загрузочный сектор в файл: dd if=/dev/hda# of=bootsect.lnx bs=512 count=1 3. Полученный файл нужно поместить в корневой каталог диска C:. 4. Наконец, нужно отредактировать файл C:\BOOT.INI: в секцию [operating systems] дописать строку: C:\BOOTSECT.LNX="Linux" Редактировать желательно каким-нибудь досообразным редактором, чтобы в файле были досовские концы строк. Пункты 2-4 придется повторять после каждой смены загрузчика. ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [mdk-re] Re[2]: [mdk-re] Изменить параметры загрузки 2001-08-19 19:23 ` Sergey Vlasov @ 2001-08-22 21:24 ` Michael Shigorin 0 siblings, 0 replies; 13+ messages in thread From: Michael Shigorin @ 2001-08-22 21:24 UTC (permalink / raw) To: mandrake-russian On Sun, 19 Aug 2001, Sergey Vlasov wrote: > Редактировать желательно каким-нибудь досообразным редактором, чтобы в > файле были досовские концы строк. vim годится, он сам понимает ;) > Пункты 2-4 придется повторять после каждой смены загрузчика. ...поэтому, видимо, тут grub явно лучше. -- WBR, Michael Shigorin, webmaster of www.chem.univ.kiev.ua >Home Page: http://visa.chem.univ.kiev.ua/~mike/ ICQ: 113344029 >Brainbench: http://www.brainbench.com/transcript.jsp?pid=2434729 ^ permalink raw reply [flat|nested] 13+ messages in thread
* [mdk-re] Re[2]: [mdk-re] Изменить параметры загрузки 2001-08-19 14:01 ` Sergey Vlasov 2001-08-19 18:36 ` [mdk-re] Re[2]: " Sergey Sokolov @ 2001-08-19 21:18 ` Sergey Sokolov 2001-08-19 21:59 ` Sergey Vlasov 2001-08-19 23:25 ` cornet 1 sibling, 2 replies; 13+ messages in thread From: Sergey Sokolov @ 2001-08-19 21:18 UTC (permalink / raw) To: Sergey Vlasov Hello Sergey, Sunday, August 19, 2001, 2:01:34 PM, you wrote: >> целом всё получилось, только Win2K потеряла свой своп, пришлось делать >> восстановительную установку. Linux На этой машине я грузил с дискеты >> (по некоторым причинам мультизагрузчик установить нельзя) и теперь, >> естественно, lilo с дискеты не находит раздела. Он был hdb3, стал >> hda4. Какие переметры задать при загрузке, чтобы система загрузилась в >> новом разделе? SV> root=/dev/hda4 failsafe Не помогло. Точнее, помогло, но частично. Система начала грузиться, потом не нашла своп, предложила либо перезагрузиться, либо ввести пароль рута и починить. Я ввёл. :) Загрузил mc, все файлы доступны, а вот знаний явно не хватает. В общем, чтобы не загружать вас и себя, установил систему заново. А жаль. Так что нужно было сделать? -- Best regards, Sergey mailto:renar@inbox.ru Silence... ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [mdk-re] Re[2]: [mdk-re] Изменить параметры загрузки 2001-08-19 21:18 ` Sergey Sokolov @ 2001-08-19 21:59 ` Sergey Vlasov 2001-08-19 23:25 ` cornet 1 sibling, 0 replies; 13+ messages in thread From: Sergey Vlasov @ 2001-08-19 21:59 UTC (permalink / raw) To: mandrake-russian On Sun, 19 Aug 2001 21:19:02 +0400 Sergey Sokolov <renar@inbox.ru> wrote: > Hello Sergey, > > Sunday, August 19, 2001, 2:01:34 PM, you wrote: > > > >> целом всё получилось, только Win2K потеряла свой своп, пришлось делать > >> восстановительную установку. Linux На этой машине я грузил с дискеты > >> (по некоторым причинам мультизагрузчик установить нельзя) и теперь, > >> естественно, lilo с дискеты не находит раздела. Он был hdb3, стал > >> hda4. Какие переметры задать при загрузке, чтобы система загрузилась в > >> новом разделе? > > SV> root=/dev/hda4 failsafe > > Не помогло. Точнее, помогло, но частично. Система начала грузиться, > потом не нашла своп, предложила либо перезагрузиться, либо ввести > пароль рута и починить. Я ввёл. :) Загрузил mc, все файлы доступны, а > вот знаний явно не хватает. В общем, чтобы не загружать вас и себя, > установил систему заново. А жаль. > Так что нужно было сделать? Поправить в /etc/fstab имена устройств - куда что переехало. Кстати, для ext2 можно указывать в /etc/fstab не имя устройства, а метку или UUID файловой системы (man fstab). Впрочем, своп все равно так не найдется :-( ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [mdk-re] Re[2]: [mdk-re] Изменить параметры загрузки 2001-08-19 21:18 ` Sergey Sokolov 2001-08-19 21:59 ` Sergey Vlasov @ 2001-08-19 23:25 ` cornet 2001-08-21 21:23 ` [mdk-re] Восстановление системы Sergey Sokolov 1 sibling, 1 reply; 13+ messages in thread From: cornet @ 2001-08-19 23:25 UTC (permalink / raw) To: mandrake-russian Sergey Sokolov wrote: > > Hello Sergey, > > Sunday, August 19, 2001, 2:01:34 PM, you wrote: > > >> целом всё получилось, только Win2K потеряла свой своп, пришлось делать > >> восстановительную установку. Linux На этой машине я грузил с дискеты > >> (по некоторым причинам мультизагрузчик установить нельзя) и теперь, > >> естественно, lilo с дискеты не находит раздела. Он был hdb3, стал > >> hda4. Какие переметры задать при загрузке, чтобы система загрузилась в > >> новом разделе? > > SV> root=/dev/hda4 failsafe > > Не помогло. Точнее, помогло, но частично. Система начала грузиться, > потом не нашла своп, предложила либо перезагрузиться, либо ввести > пароль рута и починить. Я ввёл. :) Загрузил mc, все файлы доступны, а > вот знаний явно не хватает. В общем, чтобы не загружать вас и себя, > установил систему заново. А жаль. > Так что нужно было сделать? Все, что нужно было сделать - подправить /etc/fstab и /etc/lilo и сказать с консоли lilo. Всё. Несколько лет тому назад у меня грохнулся HPFS с кучей ценных данных. Починить я его тогда не умел и погоревав над своими файлами переустановил полуось заново, форматнув винт. А через 2 недели я узнал, что оказывается тогда HPFS вовсе не слетел а только задурил маленько и все это можно было починить одной простенькой командой. Вот уж я локти кусал!! А чо делать... сам виноват - документацию вовремя читать надо было... -- ******** FIRE & STEEL ******** ^ permalink raw reply [flat|nested] 13+ messages in thread
* [mdk-re] Восстановление системы 2001-08-19 23:25 ` cornet @ 2001-08-21 21:23 ` Sergey Sokolov 2001-08-22 2:17 ` [mdk-re] Восстановлениесистемы Reaper 2001-08-22 19:28 ` [mdk-re] Восстановление системы Sergey Vlasov 0 siblings, 2 replies; 13+ messages in thread From: Sergey Sokolov @ 2001-08-21 21:23 UTC (permalink / raw) To: cornet Hello cornet, >> >> естественно, lilo с дискеты не находит раздела. Он был hdb3, стал >> >> hda4. Какие переметры задать при загрузке, чтобы система загрузилась в >> >> новом разделе? >> >> SV> root=/dev/hda4 failsafe >> >> Не помогло. Точнее, помогло, но частично. Система начала грузиться, >> потом не нашла своп, предложила либо перезагрузиться, либо ввести >> пароль рута и починить. Я ввёл. :) Загрузил mc, все файлы доступны, а >> вот знаний явно не хватает. В общем, чтобы не загружать вас и себя, >> установил систему заново. А жаль. >> Так что нужно было сделать? c> Все, что нужно было сделать - подправить /etc/fstab и /etc/lilo и c> сказать с консоли lilo. Всё. Не всё. Так просто. Вся беда в том, что параметр root=/dev/hda4 failsafe монтирует систему в режиме только чтение. Загрузка системы не проходит, вместо этого после ввода пароля рута появляется приглашение repair filesystem #1. Можно загрузить мс, но консолей нет, а файлы не сохраняются с руганью red-onli filesystem. Как это побороть? -- Best regards, Sergey mailto:renar@inbox.ru Silence... ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [mdk-re] Восстановлениесистемы 2001-08-21 21:23 ` [mdk-re] Восстановление системы Sergey Sokolov @ 2001-08-22 2:17 ` Reaper 2001-08-22 19:28 ` [mdk-re] Восстановление системы Sergey Vlasov 1 sibling, 0 replies; 13+ messages in thread From: Reaper @ 2001-08-22 2:17 UTC (permalink / raw) To: mandrake-russian -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 21 Август 2001 21:24, Вы написали: <SKIP> > Не всё. Так просто. Вся беда в том, что параметр root=/dev/hda4 > failsafe монтирует систему в режиме только чтение. Загрузка системы не > проходит, вместо этого после ввода пароля рута появляется приглашение > repair filesystem #1. Можно загрузить мс, но консолей нет, а файлы не > сохраняются с руганью red-onli filesystem. Как это побороть? mount <your root filesystem> -oremount,rw - -- С уважением, Юрий Борунов. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE7gt4/yttlzqtJmncRAk3rAJ9XSDkYRX8FiWvqQWjjXUwjzk+7PwCgtG9F 1mAHC4/dhhakLJumHchs/vE= =X4iO -----END PGP SIGNATURE----- ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [mdk-re] Восстановление системы 2001-08-21 21:23 ` [mdk-re] Восстановление системы Sergey Sokolov 2001-08-22 2:17 ` [mdk-re] Восстановлениесистемы Reaper @ 2001-08-22 19:28 ` Sergey Vlasov 1 sibling, 0 replies; 13+ messages in thread From: Sergey Vlasov @ 2001-08-22 19:28 UTC (permalink / raw) To: mandrake-russian On Tue, 21 Aug 2001 21:24:48 +0400 Sergey Sokolov <renar@inbox.ru> wrote: > Hello cornet, > > > >> >> естественно, lilo с дискеты не находит раздела. Он был hdb3, стал > >> >> hda4. Какие переметры задать при загрузке, чтобы система загрузилась в > >> >> новом разделе? > >> > >> SV> root=/dev/hda4 failsafe > >> > >> Не помогло. Точнее, помогло, но частично. Система начала грузиться, > >> потом не нашла своп, предложила либо перезагрузиться, либо ввести > >> пароль рута и починить. Я ввёл. :) Загрузил mc, все файлы доступны, а > >> вот знаний явно не хватает. В общем, чтобы не загружать вас и себя, > >> установил систему заново. А жаль. > >> Так что нужно было сделать? > > c> Все, что нужно было сделать - подправить /etc/fstab и /etc/lilo и > c> сказать с консоли lilo. Всё. > > > Не всё. Так просто. Вся беда в том, что параметр root=/dev/hda4 > failsafe монтирует систему в режиме только чтение. Загрузка системы не > проходит, вместо этого после ввода пароля рута появляется приглашение > repair filesystem #1. Можно загрузить мс, но консолей нет, а файлы не > сохраняются с руганью red-onli filesystem. Как это побороть? failsafe - это так, на всякий случай; тут до него даже не дошло - при fsck для / не нашлась файловая система там, где было написано в fstab, и по этому поводу загрузка вывалилась в repair filesystem. А нужно было сделать mount / -o remount,rw и поправить /etc/fstab и /etc/lilo.conf. ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [mdk-re] Изменить параметры загрузки 2001-08-19 13:45 [mdk-re] Изменить параметры загрузки Sergey Sokolov 2001-08-19 14:01 ` Sergey Vlasov @ 2001-08-19 14:02 ` Vyt 1 sibling, 0 replies; 13+ messages in thread From: Vyt @ 2001-08-19 14:02 UTC (permalink / raw) To: mandrake-russian On Sun, 19 Aug 2001 13:46:22 +0400 Sergey Sokolov <renar@inbox.ru> wrote: > Добрый день! > > Приобрёл новый жёсткий диск и занялся переносом систем. В общем и > целом всё получилось, только Win2K потеряла свой своп, пришлось делать > восстановительную установку. Linux На этой машине я грузил с дискеты > (по некоторым причинам мультизагрузчик установить нельзя) и теперь, > естественно, lilo с дискеты не находит раздела. Он был hdb3, стал > hda4. Какие переметры задать при загрузке, чтобы система загрузилась в > новом разделе? linux_image_name root=/dev/hda4 После чего нужно поправить настройки загрузчика. <skipped> -- Regards, Vyt mailto: vyt@vzljot.ru JID: vyt@jabber.[org,com] ^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2001-08-22 21:24 UTC | newest] Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2001-08-19 13:45 [mdk-re] Изменить параметры загрузки Sergey Sokolov 2001-08-19 14:01 ` Sergey Vlasov 2001-08-19 18:36 ` [mdk-re] Re[2]: " Sergey Sokolov 2001-08-19 19:00 ` [mdk-re] " Mikhail Nikitin 2001-08-19 19:23 ` Sergey Vlasov 2001-08-22 21:24 ` Michael Shigorin 2001-08-19 21:18 ` Sergey Sokolov 2001-08-19 21:59 ` Sergey Vlasov 2001-08-19 23:25 ` cornet 2001-08-21 21:23 ` [mdk-re] Восстановление системы Sergey Sokolov 2001-08-22 2:17 ` [mdk-re] Восстановлениесистемы Reaper 2001-08-22 19:28 ` [mdk-re] Восстановление системы Sergey Vlasov 2001-08-19 14:02 ` [mdk-re] Изменить параметры загрузки Vyt
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git