* fonts in Emacs, was: Re: [mdk-re] auctex
2001-05-03 20:16 ` Yura Zotov
@ 2001-05-03 21:06 ` Ivan Zakharyaschev
2001-05-03 21:32 ` Yura Zotov
2001-05-03 21:49 ` Michael Bykov
2001-05-03 21:50 ` Sergey Vlasov
2 siblings, 1 reply; 6+ messages in thread
From: Ivan Zakharyaschev @ 2001-05-03 21:06 UTC (permalink / raw)
To: Linux-Mandrake RE
Hello, Yura!
On Thu, 3 May 2001, Yura Zotov wrote:
> Решил я снести emacs из Mdk-7.2 и поставить родной из Spring. И вот что
> получилось, русский текст в Emacs, отображаемый шрифтом medium,
> показывается по-русски. Как только он становится bold, например при
> включенном режиме flyspell, то почему-то кодировка сразу на глазах
> меняется на непонятно что и показывается уже НЕ по-русски, хотя на диск
> файл записывается как положено. AucTeX еще даже прикручивал.
> Подскажите,
> пожалуйста, в чем проблема, кто понял.
Я не знаю в чем проблема, может быть в названиях шрифтов... Я ее тоже
наблюдал с шрифтом rfx-courier-...-koi8-r.
Сейчас у меня в ~/.Xdefaults:
emacs*font: -cronyx-courier-medium-r-normal-*-*-140-*-*-m-*-koi8-r
и все показывается нормально.
Хотя остались некоторые не понятные мне вещи.
Перебирал шрифты я в gfontsel, и пытался найти наименее уродливый
моноширинный шрифт с кодировкой koi8-r, да еще и имеющий одинаковую ширину
букв в нормальном и в жирном варианте. Во-первых, и нормальным и
жирным шрифтом rfx-courier gfontsel нормально показывает русскую надпись
(а Emacs почему-то нет, есть подозрение на странные настоящие имена
шрифтов). Во-вторых, выбранный мною в конце концов -cronyx-courier
почему-то в gfontsel как будто бы имеет разную ширину в нормальном и
жирном варианте, в то время в Emacs'е жирные надписи им имеют ту
же ширину, что и нежирные.
> P.S. Вот правильная ссылка на auctex
> http://sunsite.dk/auctex/
P.S. Другой auctex (fork этого, насколько я понял) входит в XEmacs. Это не
призыв пользоваться XEmacs :-) -- если Вы сейчас мигрируете под него, то
наши шансы увидеть в ближайшее время работающий с GNU Emacs auctex резко
уменьшаться.
--
Best regards,
Ivan Zakhrayschev
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: fonts in Emacs, was: Re: [mdk-re] auctex
2001-05-03 21:06 ` fonts in Emacs, was: " Ivan Zakharyaschev
@ 2001-05-03 21:32 ` Yura Zotov
0 siblings, 0 replies; 6+ messages in thread
From: Yura Zotov @ 2001-05-03 21:32 UTC (permalink / raw)
To: Linux-Mandrake RE
On Thu, May 03, 2001 at 09:11:30PM +0400, Ivan Zakharyaschev wrote:
> Hello, Yura!
>
> On Thu, 3 May 2001, Yura Zotov wrote:
>
> > Решил я снести emacs из Mdk-7.2 и поставить родной из Spring. И вот что
> > получилось, русский текст в Emacs, отображаемый шрифтом medium,
> > показывается по-русски. Как только он становится bold, например при
> > включенном режиме flyspell, то почему-то кодировка сразу на глазах
> > меняется на непонятно что и показывается уже НЕ по-русски, хотя на диск
> > файл записывается как положено. AucTeX еще даже прикручивал.
> > Подскажите,
> > пожалуйста, в чем проблема, кто понял.
>
> Я не знаю в чем проблема, может быть в названиях шрифтов... Я ее тоже
> наблюдал с шрифтом rfx-courier-...-koi8-r.
>
> Сейчас у меня в ~/.Xdefaults:
>
> emacs*font: -cronyx-courier-medium-r-normal-*-*-140-*-*-m-*-koi8-r
>
> и все показывается нормально.
>
Ура! У меня тоже заработало! Спасибо!
> > P.S. Вот правильная ссылка на auctex
> > http://sunsite.dk/auctex/
>
> P.S. Другой auctex (fork этого, насколько я понял) входит в XEmacs. Это не
> призыв пользоваться XEmacs :-) -- если Вы сейчас мигрируете под него, то
> наши шансы увидеть в ближайшее время работающий с GNU Emacs auctex резко
> уменьшаться.
В XEmacs я мигрировать не собираюсь. К тому-же auctex-10.0g, который я
скачал пока успешно работает на GNU Emacs.
>
> --
> Best regards,
> Ivan Zakhrayschev
--
Юрий А. Зотов
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [mdk-re] auctex
2001-05-03 20:16 ` Yura Zotov
2001-05-03 21:06 ` fonts in Emacs, was: " Ivan Zakharyaschev
@ 2001-05-03 21:49 ` Michael Bykov
2001-05-03 21:50 ` Sergey Vlasov
2 siblings, 0 replies; 6+ messages in thread
From: Michael Bykov @ 2001-05-03 21:49 UTC (permalink / raw)
To: mandrake-russian
> Решил я снести emacs из Mdk-7.2 и поставить родной из Spring. И
вот что
> получилось, русский текст в Emacs, отображаемый шрифтом medium,
> показывается по-русски. Как только он становится bold, например
при
> включенном режиме flyspell, то почему-то кодировка сразу на
глазах
> меняется на непонятно что и показывается уже НЕ по-русски, хотя
на диск
> файл записывается как положено. AucTeX еще даже прикручивал.
Подскажите,
> пожалуйста, в чем проблема, кто понял.
>
> P.S. Вот правильная ссылка на auctex
> http://sunsite.dk/auctex/
>
> --
> Юрий А. Зотов
>
Я с этим столкнулся. Стартую его теперь черным по белому emacs -fn
bla-bla и все хорошо.
--
M.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [mdk-re] auctex
2001-05-03 20:16 ` Yura Zotov
2001-05-03 21:06 ` fonts in Emacs, was: " Ivan Zakharyaschev
2001-05-03 21:49 ` Michael Bykov
@ 2001-05-03 21:50 ` Sergey Vlasov
2 siblings, 0 replies; 6+ messages in thread
From: Sergey Vlasov @ 2001-05-03 21:50 UTC (permalink / raw)
To: mandrake-russian
On Thu, 3 May 2001 20:19:48 +0400
Yura Zotov <yznews@hotbox.ru> wrote:
> Решил я снести emacs из Mdk-7.2 и поставить родной из Spring. И вот что
> получилось, русский текст в Emacs, отображаемый шрифтом medium,
> показывается по-русски. Как только он становится bold, например при
> включенном режиме flyspell, то почему-то кодировка сразу на глазах
> меняется на непонятно что и показывается уже НЕ по-русски, хотя на диск
> файл записывается как положено. AucTeX еще даже прикручивал. Подскажите,
> пожалуйста, в чем проблема, кто понял.
У меня в .Xdefault вот что по поводу Emacs (это уже давно было настроено,
еще на 7.0RE):
Emacs*Background: AntiqueWhite1
Emacs*Foreground: Black
Emacs*bitmapIcon: on
Emacs.font: fontset-0
Emacs*XlwMenu.font: lucidasanstypewriter-12
Emacs*XlwMenu.Background: AntiqueWhite3
Emacs*XlwMenu.Foreground: Black
Emacs*Dialog*font: lucidasanstypewriter-12
Emacs*Dialog*Background: AntiqueWhite3
Emacs*Dialog*Foreground: Black
Emacs.Fontset-0: -*-courier-medium-r-normal-*-*-140-*-*-m-*-fontset-0,\
cyrillic-iso8859-5:-*-courier-medium-r-normal-*-*-140-*-*-m-*-iso8859-5
Почти все работает, для HELLO даже японокитайские шрифты находит :-)
Вот сейчас заметил, что нет italic, а ну и черт с ним... Bold на месте.
^ permalink raw reply [flat|nested] 6+ messages in thread