From: Evgeny Yugov <yugov@scs-900.ru> To: "Журкин Владимир Александрович" <community@altlinux.ru> Subject: Re[2]: [Comm] USB-COM порт - что это такое Date: Tue, 14 Oct 2003 07:31:55 -0000 Message-ID: <197288534.20031014143149@scs-900.ru> (raw) In-Reply-To: <20031014150338.66e2ede5.vladimir@kgrs.kuzbe.elektra.ru> Здравствуйте Журкин, Tuesday, October 14, 2003, 2:03:38 PM, you wrote: ЖВА> К сожалению, не помогло... Модуль usbserial загружается без ошибок, в логах ЖВА> ничего нет, но устройство не находит: ЖВА> C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA ЖВА> I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) ЖВА> E: Ad=81(I) Atr=03(Int.) MxPS= 10 Ivl=1ms ЖВА> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms ЖВА> E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms ЖВА> Кабель, кстати, действительно Mobile Action MA-8710C USB. ЖВА> В поддерживаемых ядром USB-Serial converters вообще нет Mobile Action. ЖВА> Значит, ситуация безнадёжная? И в Linux завести это не удастся?? Тээкс, у меня почти последний Сизифус, кабель MA-8910P был еще MA-8620C, при втыкании оных в рабочую машину в логе: Oct 14 14:14:56 yugov kernel: hub.c: new USB device 00:1f.2-1, assigned address 2 Oct 14 14:14:56 yugov kernel: usb.c: USB device 2 (vend/prod 0x67b/0x2303) is not claimed by any active driver. Oct 14 14:15:00 yugov /etc/hotplug/usb.agent: Setup pl2303 for USB product 67b/2303/202 Oct 14 14:15:00 yugov kernel: usb.c: registered new driver serial Oct 14 14:15:00 yugov kernel: usbserial.c: USB Serial support registered for Generic Oct 14 14:15:00 yugov kernel: usbserial.c: USB Serial Driver core v1.4 Oct 14 14:15:00 yugov kernel: usbserial.c: USB Serial support registered for PL-2303 Oct 14 14:15:00 yugov kernel: usbserial.c: PL-2303 converter detected Oct 14 14:15:00 yugov kernel: usbserial.c: PL-2303 converter now attached to ttyUSB0 (or usb/tts/0 for devfs) Oct 14 14:15:00 yugov kernel: pl2303.c: Prolific PL2303 USB to serial adaptor driver v0.10 Тобишь все случилось, и: [john@yugov john]$ cat /proc/bus/usb/devices T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=d800 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=d000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=067b ProdID=2303 Rev= 2.02 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=serial E: Ad=81(I) Atr=03(Int.) MxPS= 10 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms Видимо Вам прийдется вытащить новое ядро и/или обновить hotplug. -- With Best regards, Evgeny Yugov, MTS, programmer of Advanced Technologies Departament. Registered Linux User #316667 mailto:yugov@scs-900.ru Origin: Хорошо зафиксированный пациент в анестезии не нуждается.
next prev parent reply other threads:[~2003-10-14 7:31 UTC|newest] Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top 2003-10-14 1:57 Журкин Владимир Александрович 2003-10-14 2:03 ` Evgeny Yugov 2003-10-14 2:24 ` Журкин Владимир Александрович 2003-10-14 2:49 ` Re[2]: " Evgeny Yugov 2003-10-14 3:26 ` Журкин Владимир Александрович 2003-10-14 4:14 ` Re[4]: " Evgeny Yugov 2003-10-14 4:59 ` Re[2]: " iLya Bryzgalow 2003-10-14 6:06 ` Журкин Владимир Александрович 2003-10-14 6:11 ` Shrek 2003-10-14 6:33 ` iLya Bryzgalow 2003-10-14 7:01 ` Журкин Владимир Александрович 2003-10-14 7:31 ` Evgeny Yugov [this message] 2003-10-14 7:42 ` Re[2]: " iLya Bryzgalow 2003-10-14 8:19 ` Журкин Владимир Александрович 2003-10-14 11:09 ` Re[4]: " Evgeny Yugov 2003-10-15 1:44 ` Журкин Владимир Александрович 2003-10-15 2:51 ` Evgeny Yugov 2003-10-15 3:57 ` iLya Bryzgalow 2003-10-14 13:57 ` Roman Savelyev 2003-10-14 13:57 ` Roman Savelyev 2003-10-14 7:40 ` iLya Bryzgalow 2003-10-14 12:36 ` Sergey Vlasov 2003-10-14 14:19 ` iLya Bryzgalow 2003-10-14 13:55 ` Roman Savelyev 2003-10-14 6:30 ` Re[2]: " iLya Bryzgalow 2003-10-14 12:50 ` Sergey Vlasov 2003-10-14 13:52 ` Roman Savelyev 2003-10-14 13:50 ` Roman Savelyev
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=197288534.20031014143149@scs-900.ru \ --to=yugov@scs-900.ru \ --cc=community@altlinux.ru \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git