ALT Linux Community general discussions
 help / color / mirror / Atom feed
* [Comm] Linux на старой машине
@ 2003-10-25 21:09 Минц Михаил Михайлович
  2003-10-26 22:08 ` Aleksey Korotkov
  2003-10-27  9:28 ` Yury Aliaev
  0 siblings, 2 replies; 16+ messages in thread
From: Минц Михаил Михайлович @ 2003-10-25 21:09 UTC (permalink / raw)
  To: community


     Доброе утро, Сообщество!
     Придётся отвечать всем сразу, так, наверное, удобнее будет.

     I.  Процессор именно K5, материнка ASUS SP97-V Rev. 1.02, со 
встроенным видеоадаптером, чипсет, вроде бы, SiS 5598 (тут 
полной уверенности нет, возможно что-то перепутал по 
неграмотности), Award Modular BIOS v.4.51PG, память: 45056+4096K 
shared memory.
     II. В текстовом режиме с mem=24M виснет, как и в обычном.
     III. "Подцепить винт к более мощной машине, поставить 
систему, затем вернуть винт на место" - подцепить как Primary 
Master или это необязательно? И как задать параметры 
оборудования, если система ставится на одном компьютере, чтобы 
запускаться на другом?
     IV. На всякий случай воспроизвожу то, что горит на экране 
после зависания инсталлятора:

PCI: PCI BIOS revision 2.10 entry at 0xf04b0, bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router SYS [1039/0008] at 00:01.0
Disabling direct PCI/PCI transfers.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
kinoded started
vesafb: framebuffer at 0x8000000, mapped to 0xc3800000, size 
4096k
vesafb: mode is 800x600x16, linelength=1600, pages=0
vesafb: protected mode interface info at c832:000c
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; overrride 
with idebus=xx
SIS5513: IDE controller on PCI bus 00 dev 09
PCI: Assigned IRQ 14 for device 00:01.1
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SiS5597    ATA 33 controller
    ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, 
hdb:pio
    ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:pio, 
hdd:DMA
hda: FUJITSU MPA3026ATU, ATA DISK drive
hdd: CRD-8482B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15

на этом процесс останавливается.

     С уважением,
     Михаил

^ permalink raw reply	[flat|nested] 16+ messages in thread

end of thread, other threads:[~2003-11-06 12:50 UTC | newest]

Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-10-25 21:09 [Comm] Linux на старой машине Минц Михаил Михайлович
2003-10-26 22:08 ` Aleksey Korotkov
2003-10-27 13:29   ` Andriy Dobrovol's'kii
2003-10-27 13:39     ` Korshunov Ilya
2003-10-27 16:12       ` Andriy Dobrovol's'kii
2003-10-27 21:03     ` Aleksey Korotkov
2003-10-27 21:05       ` eee-ee
2003-10-28  5:37         ` Andrey Novoselov
2003-10-28 10:20           ` eee-ee
2003-10-27  9:28 ` Yury Aliaev
2003-10-27 13:51   ` Canis Cerberus
2003-10-28  9:16     ` Yury Aliaev
2003-11-05 19:26       ` Re[2]: " mummick
2003-11-05 21:16         ` [Comm] " Michael Shigorin
2003-11-06 12:19         ` [Comm] " Canis Cerberus
2003-11-06 12:50         ` Re[2]: " Yury Aliaev

ALT Linux Community general discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
		mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
	public-inbox-index community

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.community


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git