ALT Linux Community general discussions
 help / color / mirror / Atom feed
From: Artur Yakupov <artur@dartel.ru>
To: Andy Gorev <horror@altlinux.ru>
Cc: community@altlinux.ru
Subject: Re[2]: [Comm] Unsupported protocol 'Compression Control
Date: Wed, 14 Jul 2004 17:05:01 +0400
Message-ID: <195091481.20040714170501@dartel.ru> (raw)
In-Reply-To: <40F52276.4070709@altlinux.ru>

Здравствуйте.

AG> Во-первых, локальный пир заказывает удаленному mru=200, что меньше mtu,
AG> поэтому фрагментация не происходит, и как следствие пакеты более 200 
AG> байт не пролазят. man pppd на предмет mru. Вам надо выставить mru=mtu

AG> Во-вторых, удаленный пир хочет mppe, а локальный на это либо не 
AG> сконфигурирован, либо не умеет. Поэтому noccp. Возьмите ядро из сизифа, 
AG> там много исправлений по части mppe.

mru 1500, но все тоже получалось. noccp стоит в опциях.
Какое ядро взять из сизифа? Сейчас стоит  kernel24-up-2.4.18-alt16
Посмотрите, пож-та, мои конфиги и логи.

Очень нужна помощь по этому вопросу.

 Присылаю свои конфиги и логи.
# pslave.conf
all.loc_host    192.168.0.5
all.pppd        /usr/sbin/pppd-radius
all.locallogins no
all.syslog
all.facility    7
all.filterdir   /etc/portslave/filters
all.debug       2
all.authtype    radius
all.radnullpass yes
all.protocol    ppp
all.rem_host    192.168.0.33+
all.netmask     255.255.255.255
all.mtu         1500
all.syswtmp     yes
all.porttype    async
all.speed       115200
all.initchat    TIMEOUT 10 \
                ABORT "NO CARRIER" \
                ABORT VOICE \
                SETVAR "C=CARRIER " \
                SETVAR C+PROTOCOL: \
                SETVAR C?CONNECT \
                "" \d\l\dAT&B1&S0&H1&K0S0=1&A3S7=60X7&C1S39 \
                OK\r\n-AT+++\d\d\d-OK\r\n "\c" \
                TIMEOUT 3600 \
                RING "\c" \
                STATUS Incoming %p:I.HANDSHAKE \
                "" ATA \
                TIMEOUT 75 \
                CONNECT "\c" \
                STATUS Connected %p:I.HANDSHAKE
all.flow        hard
all.dcd         1
all.autoppp     proxyarp %d asyncmap 000A0000 %i: \
                noipx noccp debug auth require-pap refuse-chap \
                mtu %t mru %t \
                ms-dns xxxx.xxxx.xxxx.xxxx ms-dns xxxx.xxxx.xxxx.xxxx \
                callback server \
                plugin /usr/lib/libpsr.so

all.pppopt      proxyarp %d asyncmap 0 %i: \
                noipx noccp \
                mtu %t mru %t \
                netmask %m idle %I maxconnect %T \
                ms-dns xxxx.xxxx.xxxx.xxxx ms-dns xxxx.xxxx.xxxx.xxxx \
                plugin /usr/lib/libpsr.so
s0.tty          ttyR0

# /etc/ppp/options

auth
-chap
+pap
crtscts
debug
ms-dns xxxx.xxxx.xxxx.xxxx


# /etc/ppp/callback-server

DELAY="$1"
NUMBER="$2"

/usr/sbin/chat -v -t 2 "" ATH0  
sleep $DELAY
sleep 20
/usr/sbin/chat -v "" AT OK ATS=40D$NUMBER CONNECT ''


#debug

Jul 14 20:48:19 gwtest port[S0]: chatarray: 32 words
Jul 14 20:48:19 gwtest port[S0]: Cleaned abort list.
Jul 14 20:48:19 gwtest port[S0]: Cleaned setvar list.
Jul 14 20:48:19 gwtest port[S0]: chatarray: special word: TIMEOUT, index: 0, code: 0, req. words: 2
Jul 14 20:48:19 gwtest port[S0]: chatarray: special word: ABORT, index: 3, code: 3, req. words: 2
Jul 14 20:48:19 gwtest port[S0]: Added abort string "NO CARRIER" at 0.
Jul 14 20:48:19 gwtest port[S0]: chatarray: special word: ABORT, index: 3, code: 3, req. words: 2
Jul 14 20:48:19 gwtest port[S0]: Added abort string "VOICE" at 1.
Jul 14 20:48:19 gwtest port[S0]: chatarray: special word: SETVAR, index: 4, code: 4, req. words: 2
Jul 14 20:48:19 gwtest port[S0]: Added setvar string "CARRIER " at 0.
Jul 14 20:48:19 gwtest port[S0]: chatarray: special word: SETVAR, index: 4, code: 4, req. words: 2
Jul 14 20:48:19 gwtest port[S0]: Added setvar string "PROTOCOL:" at 1.
Jul 14 20:48:19 gwtest port[S0]: chatarray: special word: SETVAR, index: 4, code: 4, req. words: 2
Jul 14 20:48:19 gwtest port[S0]: Added setvar string "CONNECT" at 2.
Jul 14 20:48:19 gwtest port[S0]: chat_expect(, 10)
Jul 14 20:48:19 gwtest port[S0]: chat_expect - got it
Jul 14 20:48:19 gwtest port[S0]: chat_send(\d\l\dAT&B1&S0&H1&K0S0=1&A3S7=60X7&C1S39)
Jul 14 20:48:23 gwtest port[S0]: chat_expect(OK^M , 10)
Jul 14 20:48:23 gwtest port[S0]: chat_expect - got it
Jul 14 20:48:23 gwtest port[S0]: chat_send(\c)
Jul 14 20:48:23 gwtest port[S0]: chatarray: special word: TIMEOUT, index: 0, code: 0, req. words: 2
Jul 14 20:48:23 gwtest port[S0]: chat_expect(RING, 3600)
Jul 14 20:48:44 gwtest port[S0]: chat_expect - got it
Jul 14 20:48:44 gwtest port[S0]: chat_send(\c)
Jul 14 20:48:44 gwtest port[S0]: chatarray: special word: STATUS, index: 2, code: 2, req. words: 3
Jul 14 20:48:44 gwtest port[S0]: chat_expect(, 3600)
Jul 14 20:48:44 gwtest port[S0]: chat_expect - got it
Jul 14 20:48:44 gwtest port[S0]: chat_send(ATA)
Jul 14 20:48:45 gwtest port[S0]: chatarray: special word: TIMEOUT, index: 0, code: 0, req. words: 2
Jul 14 20:48:45 gwtest port[S0]: chat_expect(CONNECT, 75)
Jul 14 20:48:54 gwtest port[S0]: Match on setvar string "CONNECT".
Jul 14 20:48:54 gwtest port[S0]: chat_expect - got it
Jul 14 20:48:54 gwtest port[S0]: chat_send(\c)
Jul 14 20:48:54 gwtest port[S0]: chatarray: special word: STATUS, index: 2, code: 2, req. words: 3
Jul 14 20:48:57 gwtest port[S0]: using channel 130
Jul 14 20:48:57 gwtest port[S0]: sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <auth pap> <magic 0xf6de49fc> <accomp>]
Jul 14 20:48:57 gwtest kernel: divert: not allocating divert_blk for non-ethernet device ppp0
Jul 14 20:49:00 gwtest port[S0]: sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <auth pap> <magic 0xf6de49fc> <accomp>]
Jul 14 20:49:00 gwtest port[S0]: rcvd [LCP ConfReq id=0x3 <asyncmap 0xa0000> <magic 0x1ad2084> <pcomp> <accomp> <callback
CBCP>]
Jul 14 20:49:00 gwtest port[S0]: sent [LCP ConfRej id=0x3 <pcomp>]
Jul 14 20:49:01 gwtest port[S0]: rcvd [LCP ConfAck id=0x1 <asyncmap 0xa0000> <auth pap> <magic 0xf6de49fc> <accomp>]
Jul 14 20:49:01 gwtest port[S0]: rcvd [LCP ConfReq id=0x4 <asyncmap 0xa0000> <magic 0x1ad2084> <accomp> <callback CBCP>]
Jul 14 20:49:01 gwtest port[S0]: sent [LCP ConfAck id=0x4 <asyncmap 0xa0000> <magic 0x1ad2084> <accomp> <callback CBCP>]
Jul 14 20:49:01 gwtest port[S0]: cbcp_lowerup
Jul 14 20:49:01 gwtest port[S0]: want: 0
Jul 14 20:49:01 gwtest port[S0]: rcvd [PAP AuthReq id=0x1 user="support" password=<hidden>]
Jul 14 20:49:01 gwtest port[S0]: sent [PAP AuthAck id=0x1 ""]
Jul 14 20:49:01 gwtest port[S0]: cbcp_open
Jul 14 20:49:01 gwtest port[S0]: cbcp_sendreq cb_allowed=4
Jul 14 20:49:01 gwtest port[S0]: cbcp_sendreq CONF_USER
Jul 14 20:49:01 gwtest port[S0]: sent [CBCP Request id=0x1 < UserDefined delay = 5>]
Jul 14 20:49:04 gwtest port[S0]: rcvd [CBCP Response id=0x1 < UserDefined delay = 15 number = 480908>]
Jul 14 20:49:04 gwtest port[S0]: peer will callback the client on: 480908
Jul 14 20:49:04 gwtest port[S0]: cbcp_sendack cb_type=4
Jul 14 20:49:04 gwtest port[S0]: cbcp_sendack CONF_USER
Jul 14 20:49:04 gwtest port[S0]: sent [CBCP Ack id=0x1 < UserDefined delay = 15 number = 480908>]
Jul 14 20:49:04 gwtest port[S0]: rcvd [LCP TermReq id=0x5]
Jul 14 20:49:04 gwtest port[S0]: sent [LCP TermAck id=0x5]
Jul 14 20:49:07 gwtest port[S0]: cbcp_start_callback running
Jul 14 20:49:07 gwtest kernel: divert: no divert_blk to free, ppp0 not ethernet
Jul 14 20:50:06 gwtest port[S0]: using channel 131
Jul 14 20:50:06 gwtest port[S0]: sent [LCP ConfReq id=0x2 <asyncmap 0xa0000> <auth pap> <magic 0x6afcbc21> <accomp>]
Jul 14 20:50:06 gwtest kernel: divert: not allocating divert_blk for non-ethernet device ppp0
Jul 14 20:50:06 gwtest port[S0]: rcvd [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x1ae3a41> <pcomp> <accomp>]
Jul 14 20:50:06 gwtest port[S0]: sent [LCP ConfRej id=0x1 <pcomp>]
Jul 14 20:50:07 gwtest port[S0]: rcvd [LCP ConfAck id=0x2 <asyncmap 0xa0000> <auth pap> <magic 0x6afcbc21> <accomp>]
Jul 14 20:50:07 gwtest port[S0]: rcvd [LCP ConfReq id=0x2 <asyncmap 0xa0000> <magic 0x1ae3a41> <accomp>]
Jul 14 20:50:07 gwtest port[S0]: sent [LCP ConfAck id=0x2 <asyncmap 0xa0000> <magic 0x1ae3a41> <accomp>]
Jul 14 20:50:07 gwtest port[S0]: rcvd [PAP AuthReq id=0x1 user="support" password=<hidden>]
Jul 14 20:50:07 gwtest port[S0]: sent [PAP AuthAck id=0x1 ""]
Jul 14 20:50:07 gwtest port[S0]: sent [IPCP ConfReq id=0x1 <addr 62.33.38.5> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Jul 14 20:50:07 gwtest port[S0]: rcvd [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-wins
0.0.0.0> <ms-dns3 0.0.0.0> <ms-wins 0.0.0.0>]
Jul 14 20:50:07 gwtest port[S0]: sent [IPCP ConfRej id=0x1 <compress VJ 0f 01> <ms-wins 0.0.0.0> <ms-wins 0.0.0.0>]
Jul 14 20:50:07 gwtest port[S0]: rcvd [CCP ConfReq id=0x1 <mppe 0 0 0 1 11 05 00 01 04]
Jul 14 20:50:07 gwtest port[S0]: sent [LCP ProtRej id=0x3 80 fd 01 01 00 0f 12 06 00 00 00 01 11 05 00 01 04]
Jul 14 20:50:07 gwtest port[S0]: rcvd [IPCP ConfRej id=0x1 <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Jul 14 20:50:07 gwtest port[S0]: sent [IPCP ConfReq id=0x2 <addr 62.33.38.5>]
Jul 14 20:50:07 gwtest port[S0]: rcvd [IPCP ConfAck id=0x2 <addr 62.33.38.5>]
Jul 14 20:50:10 gwtest port[S0]: rcvd [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-wins 0.0.0.0> <ms-dns3
0.0.0.0> <ms-wins 0.0.0.0>]
Jul 14 20:50:10 gwtest port[S0]: sent [IPCP ConfRej id=0x2 <ms-wins 0.0.0.0> <ms-wins 0.0.0.0>]
Jul 14 20:50:10 gwtest port[S0]: sent [IPCP ConfReq id=0x2 <addr 62.33.38.5>]
Jul 14 20:50:10 gwtest port[S0]: rcvd [IPCP ConfReq id=0x3 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Jul 14 20:50:10 gwtest port[S0]: sent [IPCP ConfNak id=0x3 <addr 62.33.38.33> <ms-dns1 62.33.39.3> <ms-dns3 62.33.38.3>]
Jul 14 20:50:10 gwtest port[S0]: rcvd [IPCP ConfAck id=0x2 <addr 62.33.38.5>]
Jul 14 20:50:11 gwtest port[S0]: rcvd [IPCP ConfReq id=0x4 <addr 62.33.38.33> <ms-dns1 62.33.39.3> <ms-dns3 62.33.38.3>]
Jul 14 20:50:11 gwtest port[S0]: sent [IPCP ConfAck id=0x4 <addr 62.33.38.33> <ms-dns1 62.33.39.3> <ms-dns3 62.33.38.3>]
Jul 14 20:50:11 gwtest port[S0]: Script /etc/ppp/ip-up started (pid 31370)
Jul 14 20:50:11 gwtest port[S0]: Script /etc/ppp/ip-up finished (pid 31370), status = 0x0
Jul 14 20:50:59 gwtest port[S0]: rcvd [LCP TermReq id=0x3]
Jul 14 20:50:59 gwtest port[S0]: Script /etc/ppp/ip-down started (pid 31412)
Jul 14 20:50:59 gwtest port[S0]: sent [LCP TermAck id=0x3]
Jul 14 20:50:59 gwtest port[S0]: Script /etc/ppp/ip-down finished (pid 31412), status = 0x0
Jul 14 20:51:02 gwtest kernel: divert: no divert_blk to free, ppp0 not ethernet
Jul 14 20:51:04 gwtest port[S0]: chatarray: 32 words
Jul 14 20:51:04 gwtest port[S0]: Cleaned abort list.
Jul 14 20:51:04 gwtest port[S0]: Cleaned setvar list.
Jul 14 20:51:04 gwtest port[S0]: chatarray: special word: TIMEOUT, index: 0, code: 0, req. words: 2
Jul 14 20:51:04 gwtest port[S0]: chatarray: special word: ABORT, index: 3, code: 3, req. words: 2
Jul 14 20:51:04 gwtest port[S0]: Added abort string "NO CARRIER" at 0.
Jul 14 20:51:04 gwtest port[S0]: chatarray: special word: ABORT, index: 3, code: 3, req. words: 2
Jul 14 20:51:04 gwtest port[S0]: Added abort string "VOICE" at 1.
Jul 14 20:51:04 gwtest port[S0]: chatarray: special word: SETVAR, index: 4, code: 4, req. words: 2
Jul 14 20:51:04 gwtest port[S0]: Added setvar string "CARRIER " at 0.
Jul 14 20:51:04 gwtest port[S0]: chatarray: special word: SETVAR, index: 4, code: 4, req. words: 2
Jul 14 20:51:04 gwtest port[S0]: Added setvar string "PROTOCOL:" at 1.
Jul 14 20:51:04 gwtest port[S0]: chatarray: special word: SETVAR, index: 4, code: 4, req. words: 2
Jul 14 20:51:04 gwtest port[S0]: Added setvar string "CONNECT" at 2.
Jul 14 20:51:04 gwtest port[S0]: chat_expect(, 10)
Jul 14 20:51:04 gwtest port[S0]: chat_expect - got it
Jul 14 20:51:04 gwtest port[S0]: chat_send(\d\l\dAT&B1&S0&H1&K0S0=1&A3S7=60X7&C1S39)
Jul 14 20:51:07 gwtest port[S0]: chat_expect(OK^M , 10)
Jul 14 20:51:08 gwtest port[S0]: chat_expect - got it
Jul 14 20:51:08 gwtest port[S0]: chat_send(\c)
Jul 14 20:51:08 gwtest port[S0]: chatarray: special word: TIMEOUT, index: 0, code: 0, req. words: 2
Jul 14 20:51:08 gwtest port[S0]: chat_expect(RING, 3600)
------------
С уважением,
Артур Якупов




  reply	other threads:[~2004-07-14 13:05 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-07-13 10:58   ` Artur Yakupov
2004-07-13 11:08     ` Andy Gorev
2004-07-13 15:42       ` Re[2]: " Artur Yakupov
2004-07-13 15:40         ` Andy Gorev
2004-07-14  6:42           ` Re[2]: " Artur Yakupov
2004-07-14 11:16           ` Artur Yakupov
2004-07-14 12:09             ` Andy Gorev
2004-07-14 13:05               ` Artur Yakupov [this message]
2004-07-14 13:16                 ` Valery V. Inozemtsev
2004-07-14 13:24                   ` Re[2]: " Artur Yakupov
2004-07-14 13:56                     ` Valery V. Inozemtsev
2004-07-14 13:33                 ` Andy Gorev

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=195091481.20040714170501@dartel.ru \
    --to=artur@dartel.ru \
    --cc=community@altlinux.ru \
    --cc=horror@altlinux.ru \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

ALT Linux Community general discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
		mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
	public-inbox-index community

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.community


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git