* [Comm] Обновление KWorkstation 8.2
@ 2019-03-08 23:33 Писковой Иван
2019-03-11 10:15 ` Sergey V Turchin
0 siblings, 1 reply; 4+ messages in thread
From: Писковой Иван @ 2019-03-08 23:33 UTC (permalink / raw)
To: ALT Linux Community general discussions
[-- Attachment #1: Type: text/plain, Size: 619 bytes --]
Здравствуйте.
Есть свежеустановленый KWorkstation 8.2. Обновляю его до текущего р8.
После перезагрузки не поднимается графика. В логах вижу:
[ 35.667] (II) Loading /etc/libnvidiacurrent/libwfb.so
[ 35.667] (EE) Failed to load /etc/libnvidiacurrent/libwfb.so:
/etc/libnvidiacurrent/libwfb.so: undefined symbol:
PictureScreenPrivateIndex
[ 35.667] (II) UnloadModule: "wfb"
Видеокарта GT520, драйвер nvidia. Что оно от меня хочет и как ему это дать?
[-- Attachment #2: Xorg.0.log --]
[-- Type: text/x-log, Size: 8129 bytes --]
[ 35.660] (--) Log file renamed from "/var/log/Xorg.pid-1437.log" to "/var/log/Xorg.0.log"
[ 35.660]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 35.660] X Protocol Version 11, Revision 0
[ 35.660] Build Operating System: ALT Linux p8 (Hypericum) x86_64
[ 35.660] Current Operating System: Linux VanyaPC.localdomain 4.9.50-un-def-alt0.M80P.1 #1 SMP PREEMPT Fri Sep 15 10:03:58 UTC 2017 x86_64
[ 35.660] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.50-un-def-alt0.M80P.1 root=UUID=5994ff90-1809-4b35-aa39-deecef48b92b ro panic=30 quiet splash
[ 35.660] Build Date: 30 November 2017 09:06:21AM
[ 35.660]
[ 35.660] Current version of pixman: 0.32.8
[ 35.660] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 35.660] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 35.660] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 9 02:11:48 2019
[ 35.661] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 35.661] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 35.661] (==) No Layout section. Using the first Screen section.
[ 35.661] (==) No screen section available. Using defaults.
[ 35.661] (**) |-->Screen "Default Screen Section" (0)
[ 35.661] (**) | |-->Monitor "<default monitor>"
[ 35.661] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 35.661] (**) | |-->Device "Card0"
[ 35.661] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 35.661] (==) Automatically adding devices
[ 35.661] (==) Automatically enabling devices
[ 35.661] (==) Automatically adding GPU devices
[ 35.661] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 35.661] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d
[ 35.661] (**) ModulePath set to "/etc/libnvidiacurrent,/usr/lib64/X11/modules"
[ 35.661] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 35.661] (II) Loader magic: 0x812d20
[ 35.661] (II) Module ABI versions:
[ 35.661] X.Org ANSI C Emulation: 0.4
[ 35.661] X.Org Video Driver: 20.0
[ 35.661] X.Org XInput driver : 22.1
[ 35.661] X.Org Server Extension : 9.0
[ 35.661] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 35.662] (--) PCI:*(0:1:0:0) 10de:1040:0000:0000 rev 161, Mem @ 0xf6000000/16777216, 0xe8000000/134217728, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[ 35.662] (II) Executed /usr/libexec/X11/drv.d/nvidia
[ 35.662] (II) LoadModule: "glx"
[ 35.663] (II) Loading /etc/libnvidiacurrent/libglx.so
[ 35.665] (II) Module glx: vendor="NVIDIA Corporation"
[ 35.665] compiled for 4.0.2, module version = 1.0.0
[ 35.665] Module class: X.Org Server Extension
[ 35.665] (II) NVIDIA GLX Module 375.82 Wed Jul 19 20:30:13 PDT 2017
[ 35.665] (II) LoadModule: "nvidia"
[ 35.665] (II) Loading /etc/libnvidiacurrent/nvidia_drv.so
[ 35.665] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 35.665] compiled for 4.0.2, module version = 1.0.0
[ 35.665] Module class: X.Org Video Driver
[ 35.665] (II) NVIDIA dlloader X Driver 375.82 Wed Jul 19 20:05:50 PDT 2017
[ 35.665] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 35.665] (++) using VT number 1
[ 35.667] (II) Loading sub module "fb"
[ 35.667] (II) LoadModule: "fb"
[ 35.667] (II) Loading /usr/lib64/X11/modules/libfb.so
[ 35.667] (II) Module fb: vendor="X.Org Foundation"
[ 35.667] compiled for 1.18.4, module version = 1.0.0
[ 35.667] ABI class: X.Org ANSI C Emulation, version 0.4
[ 35.667] (II) Loading sub module "wfb"
[ 35.667] (II) LoadModule: "wfb"
[ 35.667] (II) Loading /etc/libnvidiacurrent/libwfb.so
[ 35.667] (EE) Failed to load /etc/libnvidiacurrent/libwfb.so: /etc/libnvidiacurrent/libwfb.so: undefined symbol: PictureScreenPrivateIndex
[ 35.667] (II) UnloadModule: "wfb"
[ 35.667] (II) Unloading wfb
[ 35.667] (EE) Failed to load module "wfb" (loader failed, 7)
[ 35.667] (II) Loading sub module "ramdac"
[ 35.667] (II) LoadModule: "ramdac"
[ 35.667] (II) Module "ramdac" already built-in
[ 35.668] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 35.668] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 35.668] (==) NVIDIA(0): RGB weight 888
[ 35.668] (==) NVIDIA(0): Default visual is TrueColor
[ 35.668] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 35.668] (**) NVIDIA(0): Enabling 2D acceleration
[ 36.127] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 36.127] (--) NVIDIA(0): CRT-0 (boot)
[ 36.127] (--) NVIDIA(0): CRT-1
[ 36.127] (--) NVIDIA(0): DFP-0
[ 36.127] (--) NVIDIA(0): DFP-1
[ 36.127] (II) NVIDIA(0): NVIDIA GPU GeForce GT 520 (GF119) at PCI:1:0:0 (GPU-0)
[ 36.127] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 36.127] (--) NVIDIA(0): VideoBIOS: 75.19.1b.00.00
[ 36.127] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 36.176] (--) NVIDIA(GPU-0): DELL E176FP (CRT-0): connected
[ 36.176] (--) NVIDIA(GPU-0): DELL E176FP (CRT-0): 400.0 MHz maximum pixel clock
[ 36.176] (--) NVIDIA(GPU-0):
[ 36.208] (--) NVIDIA(GPU-0): BenQ GL2250 (CRT-1): connected
[ 36.208] (--) NVIDIA(GPU-0): BenQ GL2250 (CRT-1): 400.0 MHz maximum pixel clock
[ 36.208] (--) NVIDIA(GPU-0):
[ 36.227] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 36.227] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 36.227] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 36.227] (--) NVIDIA(GPU-0):
[ 36.227] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 36.227] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 36.227] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 36.227] (--) NVIDIA(GPU-0):
[ 36.228] (==) NVIDIA(0):
[ 36.228] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 36.228] (==) NVIDIA(0): will be used as the requested mode.
[ 36.228] (==) NVIDIA(0):
[ 36.228] (II) NVIDIA(0): Validated MetaModes:
[ 36.228] (II) NVIDIA(0): "CRT-0:nvidia-auto-select,CRT-1:nvidia-auto-select"
[ 36.228] (II) NVIDIA(0): Virtual screen size determined to be 3200 x 1080
[ 36.231] (--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config
[ 36.231] (--) NVIDIA(0): option
[ 36.231] (--) Depth 24 pixmap format is 32 bpp
[ 36.231] (II) NVIDIA: Using 12288.00 MB of virtual memory for indirect memory
[ 36.231] (II) NVIDIA: access.
[ 36.233] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 36.233] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 36.233] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 36.233] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 36.233] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 36.233] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 36.233] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 36.233] (II) NVIDIA(0): Config Options in the README.
[ 36.247] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select,CRT-1:nvidia-auto-select"
[ 36.295] (EE) NVIDIA(0): Need libwfb but wfbScreenInit not found
[ 36.488] (EE)
Fatal server error:
[ 36.488] (EE) AddScreen/ScreenInit failed for driver 0
[ 36.488] (EE)
[ 36.488] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 36.488] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 36.488] (EE)
[ 36.490] (EE) Server terminated with error (1). Closing log file.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Comm] Обновление KWorkstation 8.2
2019-03-08 23:33 [Comm] Обновление KWorkstation 8.2 Писковой Иван
@ 2019-03-11 10:15 ` Sergey V Turchin
2019-03-11 13:58 ` Писковой Иван
0 siblings, 1 reply; 4+ messages in thread
From: Sergey V Turchin @ 2019-03-11 10:15 UTC (permalink / raw)
To: ALT Linux Community general discussions
On Saturday, 9 March 2019 02:33:33 MSK Писковой Иван wrote:
[...]
> [ 35.667] (EE) Failed to load /etc/libnvidiacurrent/libwfb.so:
> /etc/libnvidiacurrent/libwfb.so: undefined symbol:
> PictureScreenPrivateIndex
> [ 35.667] (II) UnloadModule: "wfb"
>
> Видеокарта GT520, драйвер nvidia. Что оно от меня хочет и как ему это дать?
Ядро обновляйте хоть изредка.
--
Regards, Sergey.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Comm] Обновление KWorkstation 8.2
2019-03-11 10:15 ` Sergey V Turchin
@ 2019-03-11 13:58 ` Писковой Иван
2019-03-11 14:01 ` Sergey V Turchin
0 siblings, 1 reply; 4+ messages in thread
From: Писковой Иван @ 2019-03-11 13:58 UTC (permalink / raw)
To: ALT Linux Community general discussions
Да я ставил новое std-def. С ним не работает.
Потом заметил, что родное было un-def и поставил его. Заработало.
Спасибо.
11.03.2019, Sergey V Turchin<zerg@altlinux.org> написал(а):
> On Saturday, 9 March 2019 02:33:33 MSK Писковой Иван wrote:
>
> [...]
>> [ 35.667] (EE) Failed to load /etc/libnvidiacurrent/libwfb.so:
>> /etc/libnvidiacurrent/libwfb.so: undefined symbol:
>> PictureScreenPrivateIndex
>> [ 35.667] (II) UnloadModule: "wfb"
>>
>> Видеокарта GT520, драйвер nvidia. Что оно от меня хочет и как ему это
>> дать?
> Ядро обновляйте хоть изредка.
>
> --
> Regards, Sergey.
> _______________________________________________
> community mailing list
> community@lists.altlinux.org
> https://lists.altlinux.org/mailman/listinfo/community
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-03-11 14:01 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-03-08 23:33 [Comm] Обновление KWorkstation 8.2 Писковой Иван
2019-03-11 10:15 ` Sergey V Turchin
2019-03-11 13:58 ` Писковой Иван
2019-03-11 14:01 ` Sergey V Turchin
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git