* Re: [Comm] CD Master2.4 и старое железо
2006-12-07 7:46 [Comm] CD Master2.4 и старое железо Алексей Дынин
@ 2006-12-07 8:24 ` Motsyo Gennadi aka Drool
2006-12-07 13:16 ` Шишков Евгений
2006-12-07 8:25 ` Alexey Morsov
` (3 subsequent siblings)
4 siblings, 1 reply; 12+ messages in thread
From: Motsyo Gennadi aka Drool @ 2006-12-07 8:24 UTC (permalink / raw)
To: Aleksey Dynin, ALT Linux Community
[-- Attachment #1: Type: text/plain, Size: 598 bytes --]
Алексей Дынин <leshik__@mail.ru> wrote:
> Добрый день, народ,
>
> Железо старое:
> P133
> 5SVA TomatoBoard на VIA
> Video: S3Trio64V2/DX
>
> CD Master2.4
>
> Задача - запустить Terminal Windows через rdesktop
>
> Master ставиться, но не получается поднять X server :(
> подозреваю, что дело в VIA
> В какую сторону копать?
> Или есть другие решения?
Вряд-ли VIA не дает поднять иксы... Скорее видюха не распозналась. Если есть
все диски или доступ к ftp - поставьте drakxtools и поиграйтесь
/usr/X11R6/bin/Xdrakres - авось что-то выйдет, может vesa-драйвер подхватится?
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] CD Master2.4 и старое железо
2006-12-07 8:24 ` Motsyo Gennadi aka Drool
@ 2006-12-07 13:16 ` Шишков Евгений
0 siblings, 0 replies; 12+ messages in thread
From: Шишков Евгений @ 2006-12-07 13:16 UTC (permalink / raw)
To: ALT Linux Community
Motsyo Gennadi aka Drool пишет:
>> Master ставиться, но не получается поднять X server :(
>> подозреваю, что дело в VIA
>> В какую сторону копать?
>> Или есть другие решения?
>
> Вряд-ли VIA не дает поднять иксы... Скорее видюха не распозналась. Если есть
> все диски или доступ к ftp - поставьте drakxtools и поиграйтесь
> /usr/X11R6/bin/Xdrakres - авось что-то выйдет, может vesa-драйвер подхватится?
А почему бы не попробовать vesa?
--
С уважением,
Шишков Евгений (evgen[собак]tulanews[тчк]ru)
-------------
Шуруп, забитый молотком, держится крепче, чем гвоздь, закрученный отвёрткой.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] CD Master2.4 и старое железо
2006-12-07 7:46 [Comm] CD Master2.4 и старое железо Алексей Дынин
2006-12-07 8:24 ` Motsyo Gennadi aka Drool
@ 2006-12-07 8:25 ` Alexey Morsov
2006-12-07 10:08 ` Fr. Br. George
` (2 subsequent siblings)
4 siblings, 0 replies; 12+ messages in thread
From: Alexey Morsov @ 2006-12-07 8:25 UTC (permalink / raw)
To: community
[-- Attachment #1: Type: text/plain, Size: 517 bytes --]
On Thu, Dec 07, 2006 at 11:46:04AM +0400, Алексей Дынин wrote:
> Video: S3Trio64V2/DX
[skip]
> Master ставиться, но не получается поднять X server :(
> подозреваю, что дело в VIA
или в S3Trio
> В какую сторону копать?
смотреть почему не поднимается Xserver в его логах.
--
С уважением,
Алексей Морсов
системный администратор ЗАО "ИК "Риком-Траст"
ICQ: 196-766-290
Jabber: samurai@www.fondmarket.ru
www.ricom.ru
www.fondmarket.ru
NP: Utada Hikaru - Passion (drive aura mix) ^o.o^ (Passion)
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 481 bytes --]
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] CD Master2.4 и старое железо
2006-12-07 7:46 [Comm] CD Master2.4 и старое железо Алексей Дынин
2006-12-07 8:24 ` Motsyo Gennadi aka Drool
2006-12-07 8:25 ` Alexey Morsov
@ 2006-12-07 10:08 ` Fr. Br. George
2006-12-08 13:44 ` Алексей Дынин
2006-12-08 18:23 ` Michael Shigorin
2006-12-07 10:30 ` smont
2006-12-07 12:10 ` [Comm] " Алексей Дынин
4 siblings, 2 replies; 12+ messages in thread
From: Fr. Br. George @ 2006-12-07 10:08 UTC (permalink / raw)
To: Aleksey Dynin, ALT Linux Community
On Thu, Dec 07, 2006 at 11:46:04AM +0400, Алексей Дынин wrote:
> Железо старое:
> Video: S3Trio64V2/DX
Это не видеокарта. Это ужас, летящий на крыльях ночи.
> Master ставиться, но не получается поднять X server :(
Драйвер какой в /etc/X11/XF86config (или как там бишь его звали)
прописался? Возможны два варианта: S3 и VESA, второй слегка более
работоспособный. На крыльях ночи. Поменяйте один на другой. Попробуйте
S3 с какой-нибудь noaccel опцией. Попробуйте спрятать конфиг и запустить
XFree86 -configure, посмотрите, что оно само на этот счёт думает.
Если видео не встроенное, поищите в ближайших окрестностях технопомойку
и возьмите оттуда почти что любую другую PCI видюху. Их должно
оставаться у тех, кто делал upgrade на AGP.
--
Георгий Курячий (aka Fr. Br. George)
Руководитель образовательных проектов ALT Linux
mailto : george at altlinux_ru
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] CD Master2.4 и старое железо
2006-12-07 10:08 ` Fr. Br. George
@ 2006-12-08 13:44 ` Алексей Дынин
2006-12-08 15:56 ` smont
2006-12-08 18:23 ` Michael Shigorin
1 sibling, 1 reply; 12+ messages in thread
From: Алексей Дынин @ 2006-12-08 13:44 UTC (permalink / raw)
To: ALT Linux Community
Добрый день Fr.,
Thursday, December 7, 2006, 2:08:37 PM, you wrote:
FBG> On Thu, Dec 07, 2006 at 11:46:04AM +0400, Алексей Дынин wrote:
>> Железо старое:
>> Video: S3Trio64V2/DX
FBG> Это не видеокарта. Это ужас, летящий на крыльях ночи.
>> Master ставиться, но не получается поднять X server :(
FBG> Драйвер какой в /etc/X11/XF86config (или как там бишь его звали)
FBG> прописался? Возможны два варианта: S3 и VESA, второй слегка более
FBG> работоспособный. На крыльях ночи. Поменяйте один на другой. Попробуйте
FBG> S3 с какой-нибудь noaccel опцией. Попробуйте спрятать конфиг и запустить
FBG> XFree86 -configure, посмотрите, что оно само на этот счёт думает.
XFree86 -configure рулит! :)
Правда не понятно что надо было инсталятору :(
# **********************************************************************
# Graphics device section
# **********************************************************************
Section "Device"
Identifier "Generic VGA"
Driver "vga"
EndSection
Section "Device"
Identifier "S3 Trio64V2/DX (generic)"
VendorName "Unknown"
BoardName "Unknown"
Driver "s3"
# Clock lines
# Uncomment following option if you see a big white block
# instead of the cursor!
# Option "sw_cursor"
Option "DPMS" "on"
EndSection
smont> XFree86-4 не поддерживает S3 пакеты
Да, похоже это так
ШЕ> А почему бы не попробовать vesa?
слова VESA в списке доступных карточек при инсталации не обнаружил :(
ШЕ> поставьте drakxtools и поиграйтесь
попробую
Никакими манипуляциями в процессе установки настроить X server не
удалось. В графическом режиме все умирает, в текстовом при выборе
карточки S3Trio64V2/DX (есть там такая) получаем ошибку:(ЕЕ) No device detect
Надо сказать что установка на такое железо убийственно медленна :(
так что лишний раз эксперементировать с установкой с "0" не хочеться.
--
С уважением,
Алексей Дынин
leshik__@mail.ru
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] CD Master2.4 и старое железо
2006-12-08 13:44 ` Алексей Дынин
@ 2006-12-08 15:56 ` smont
0 siblings, 0 replies; 12+ messages in thread
From: smont @ 2006-12-08 15:56 UTC (permalink / raw)
To: Aleksey Dynin, ALT Linux Community
Здравствуйте, Алексей.
Вы писали 8 декабря 2006 г., 16:44:36:
> Добрый день Fr.,
> Thursday, December 7, 2006, 2:08:37 PM, you wrote:
FBG>> On Thu, Dec 07, 2006 at 11:46:04AM +0400, Алексей Дынин wrote:
>>> Железо старое:
>>> Video: S3Trio64V2/DX
FBG>> Это не видеокарта. Это ужас, летящий на крыльях ночи.
>>> Master ставиться, но не получается поднять X server :(
FBG>> Драйвер какой в /etc/X11/XF86config (или как там бишь его звали)
FBG>> прописался? Возможны два варианта: S3 и VESA, второй слегка более
FBG>> работоспособный. На крыльях ночи. Поменяйте один на другой. Попробуйте
FBG>> S3 с какой-нибудь noaccel опцией. Попробуйте спрятать конфиг и запустить
FBG>> XFree86 -configure, посмотрите, что оно само на этот счёт думает.
> XFree86 -configure рулит! :)
> Правда не понятно что надо было инсталятору :(
> #
> **********************************************************************
> # Graphics device section
> #
> **********************************************************************
> Section "Device"
> Identifier "Generic VGA"
> Driver "vga"
> EndSection
> Section "Device"
> Identifier "S3 Trio64V2/DX (generic)"
> VendorName "Unknown"
> BoardName "Unknown"
> Driver "s3"
> # Clock lines
> # Uncomment following option if you see a big white block
> # instead of the cursor!
> # Option "sw_cursor"
> Option "DPMS" "on"
> EndSection
smont>> XFree86-4 не поддерживает S3 пакеты
> Да, похоже это так
ШЕ>> А почему бы не попробовать vesa?
> слова VESA в списке доступных карточек при инсталации не обнаружил :(
ШЕ>> поставьте drakxtools и поиграйтесь
> попробую
> Никакими манипуляциями в процессе установки настроить X server не
> удалось. В графическом режиме все умирает, в текстовом при выборе
> карточки S3Trio64V2/DX (есть там такая) получаем ошибку:(ЕЕ) No device detect
> Надо сказать что установка на такое железо убийственно медленна :(
> так что лишний раз эксперементировать с установкой с "0" не хочеться.
Если нужен только клиент к терминалу имеет смысл посмотреть на
thinstation.Например на http://www.itadvisor.ru/sites/ita/HTML/pts.htm
S3 входит в список возможного железа .Русский язык тоже есть.
Работает через SVGAlib и X сервер не нужен.
--
С уважением,
smont mailto:smont@mail.ru
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] CD Master2.4 и старое железо
2006-12-07 10:08 ` Fr. Br. George
2006-12-08 13:44 ` Алексей Дынин
@ 2006-12-08 18:23 ` Michael Shigorin
1 sibling, 0 replies; 12+ messages in thread
From: Michael Shigorin @ 2006-12-08 18:23 UTC (permalink / raw)
To: ALT Linux Community
On Thu, Dec 07, 2006 at 01:08:37PM +0300, Fr. Br. George wrote:
> > Железо старое: Video: S3Trio64V2/DX
> Это не видеокарта. Это ужас, летящий на крыльях ночи.
Хорошая, между прочим, карточка была. Честная.
> > Master ставиться, но не получается поднять X server :(
> Драйвер какой в /etc/X11/XF86config (или как там бишь его
> звали) прописался? Возможны два варианта: S3 и VESA, второй
> слегка более работоспособный. На крыльях ночи.
Да нет, s3 тоже мало-мало чинили, насколько человек в bugzilla
отзывался. У меня один экземпляр под рукой есть, могу при
надобности попробовать проверить.
> Если видео не встроенное, поищите в ближайших окрестностях
> технопомойку и возьмите оттуда почти что любую другую PCI
> видюху. Их должно оставаться у тех, кто делал upgrade на AGP.
Эт да, с ati (навроде mach64) проблем будет заведомо меньше.
--
---- WBR, Michael Shigorin <mike@altlinux.ru>
------ Linux.Kiev http://www.linux.kiev.ua/
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] CD Master2.4 и старое железо
2006-12-07 7:46 [Comm] CD Master2.4 и старое железо Алексей Дынин
` (2 preceding siblings ...)
2006-12-07 10:08 ` Fr. Br. George
@ 2006-12-07 10:30 ` smont
2006-12-07 11:44 ` Fr. Br. George
2006-12-07 12:10 ` [Comm] " Алексей Дынин
4 siblings, 1 reply; 12+ messages in thread
From: smont @ 2006-12-07 10:30 UTC (permalink / raw)
To: Aleksey Dynin, ALT Linux Community
Здравствуйте, Алексей.
Вы писали 7 декабря 2006 г., 10:46:04:
> Добрый день, народ,
> Железо старое:
> P133
> 5SVA TomatoBoard на VIA
> Video: S3Trio64V2/DX
> CD Master2.4
> Задача - запустить Terminal Windows через rdesktop
> Master ставиться, но не получается поднять X server :(
> подозреваю, что дело в VIA
> В какую сторону копать?
> Или есть другие решения?
XFree86-4 не поддерживает S3
пакеты
XFree86-S3-3.3.6-ipl25mdk.i586.rpm
XFree86-S3V-3.3.6-ipl25mdk.i586.rpm
лежат
ftp://ftp.altlinux.ru/pub/distributions/ALTLinux/Master/2.4/ALTLinux/RPMS.main/XFree86-S3-3.3.6-ipl25mdk.i586.rpm
ftp://ftp.altlinux.ru/pub/distributions/ALTLinux/Master/2.4/ALTLinux/RPMS.main/XFree86-S3V-3.3.6-ipl25mdk.i586.rpm
--
С уважением,
smont mailto:smont@mail.ru
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] CD Master2.4 и старое железо
2006-12-07 10:30 ` smont
@ 2006-12-07 11:44 ` Fr. Br. George
2006-12-08 18:24 ` [Comm] [JT] " Michael Shigorin
0 siblings, 1 reply; 12+ messages in thread
From: Fr. Br. George @ 2006-12-07 11:44 UTC (permalink / raw)
To: smont, ALT Linux Community
On Thu, Dec 07, 2006 at 01:30:31PM +0300, smont wrote:
> > Задача - запустить Terminal Windows через rdesktop
> XFree86-4 не поддерживает S3
> пакеты
> XFree86-S3-3.3.6-ipl25mdk.i586.rpm
> XFree86-S3V-3.3.6-ipl25mdk.i586.rpm
> лежат
> ftp://ftp.altlinux.ru/pub/distributions/ALTLinux/Master/2.4/ALTLinux/RPMS.main/XFree86-S3-3.3.6-ipl25mdk.i586.rpm
То есть, обратите внимание, на терминалы надо ставить XFree86-3 со всеми
вытекающими. Впрочем, именно для rdesktop это, может, и не критично...
за исключением того, что сам rdesktop должен заработать.
> ftp://ftp.altlinux.ru/pub/distributions/ALTLinux/Master/2.4/ALTLinux/RPMS.main/XFree86-S3V-3.3.6-ipl25mdk.i586.rpm
Virge поддерживается вроде бы, у меня заводилось.
--
Георгий Курячий (aka Fr. Br. George)
Руководитель образовательных проектов ALT Linux
mailto : george at altlinux_ru
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] CD Master2.4 и старое железо
2006-12-07 7:46 [Comm] CD Master2.4 и старое железо Алексей Дынин
` (3 preceding siblings ...)
2006-12-07 10:30 ` smont
@ 2006-12-07 12:10 ` Алексей Дынин
4 siblings, 0 replies; 12+ messages in thread
From: Алексей Дынин @ 2006-12-07 12:10 UTC (permalink / raw)
To: Aleksey Dynin, ALT Linux Community
Добрый день Алексей,
Thursday, December 7, 2006, 11:46:04 AM, you wrote:
АД> Добрый день, народ,
АД> Железо старое:
АД> P133
АД> 5SVA TomatoBoard на VIA
АД> Video: S3Trio64V2/DX
АД> CD Master2.4
АД> Задача - запустить Terminal Windows через rdesktop
АД> Master ставиться, но не получается поднять X server :(
Всем спасибо, буду пробовать.
--
С уважением,
Алексей Дынин
leshik__@mail.ru
^ permalink raw reply [flat|nested] 12+ messages in thread