From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Andrey Kudryashov X-Mailer: The Bat! (v1.39) Educational X-Priority: 3 (Normal) Message-ID: <14666.010511@narod.ru> To: Anton Farygin Subject: Re[2]: [mdk-re] FM Radio - SF16FMI - trouble In-reply-To: <3ACECCB0.304ABC48@altlinux.ru> References: <3ACECCB0.304ABC48@altlinux.ru> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="----------621C7C720DAFA8F" X-MDaemon-Deliver-To: mandrake-russian@altlinux.ru X-Return-Path: andrey-ak@narod.ru X-MDRcpt-To: mandrake-russian@altlinux.ru X-MDRemoteIP: 151.10.10.11 Sender: mandrake-russian-admin@altlinux.ru Errors-To: mandrake-russian-admin@altlinux.ru X-BeenThere: mandrake-russian@altlinux.ru X-Mailman-Version: 2.0 Precedence: bulk Reply-To: mandrake-russian@altlinux.ru List-Help: List-Post: List-Subscribe: , List-Id: Linux-Mandrake RE / ALT Linux discussion list List-Unsubscribe: , List-Archive: Date: Fri May 11 14:54:01 2001 X-Original-Date: Fri, 11 May 2001 15:59:32 +0600 Archived-At: List-Archive: List-Post: ------------621C7C720DAFA8F Content-Type: text/plain; charset=koi8-r Content-Transfer-Encoding: 8bit Hello Anton, Saturday, April 07, 2001, 2:15:44 PM, you wrote: >> > VKM> > Народ, а чем, собственно, слушать радио с фм >> > тюнера AF> В Spring или Sisyphus поставить пакет: xawtv-radio AF> Далее - команда radio У меня как раз subj. Harddrake не смог его определить, говорит вышли pnpdump (прилагаю) и ID MFRad10. radio говорит /dev/radio0 - no such device Как полечить? AF> Rgds AF> Anton -- Best regards, Andrey mailto:andrey-ak@narod.ru ------------621C7C720DAFA8F Content-Type: application/octet-stream; name="msg" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="msg" # $Id: pnpdump_main.c,v 1.25 2001/01/06 20:45:58 fox Exp $ # Release isapnptools-1.24 # # This is free software, see the sources for details. # This software has NO WARRANTY, use at your OWN RISK # # For details of the output file format, see isapnp.conf(5) # # For latest information and FAQ on isapnp and pnpdump see: # http://www.roestock.demon.co.uk/isapnptools/ # # Compiler flags: -DREALTIME -DHAVE_PROC -DENABLE_PCI -DHAVE_SCHED_SETSCHEDULER -DHAVE_NANOSLEEP -DWANT_TO_VALIDATE # # Trying port address 0273 # Board 1 has serial identifier e5 ff ff ff ff 70 00 8c 0e # Board 2 has serial identifier 35 00 00 00 01 02 e0 86 34 # (DEBUG) (READPORT 0x0273) (ISOLATE PRESERVE) (IDENTIFY *) (VERBOSITY 2) (CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING # Card 1: (serial identifier e5 ff ff ff ff 70 00 8c 0e) # Vendor Id CTL0070, No Serial Number (-1), checksum 0xE5. # Version 1.0, Vendor version 1.0 # ANSI string -->Creative ViBRA16C PnP<-- # # Logical device id CTL0001 # Device supports vendor reserved register @ 0x3b # # Edit the entries below to uncomment out the configuration required. # Note that only the first value of any range is given, this may be changed if required # Don't forget to uncomment the activate (ACT Y) when happy (CONFIGURE CTL0070/-1 (LD 0 # ANSI string -->Audio<-- # Multiple choice time, choose one only ! # Start dependent functions: priority preferred # IRQ 5. # High true, edge sensitive interrupt (by default) # (INT 0 (IRQ 5 (MODE +E))) # First DMA channel 1. # 8 bit DMA only # Logical device is a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode # (DMA 0 (CHANNEL 1)) # Next DMA channel 5. # 16 bit DMA only # Logical device is a bus master # DMA may not execute in count by byte mode # DMA may execute in count by word mode # DMA channel speed in compatible mode # (DMA 1 (CHANNEL 5)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0220 # Maximum IO base address 0x0220 # IO base alignment 1 bytes # Number of IO addresses required: 16 # (IO 0 (SIZE 16) (BASE 0x0220)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0330 # Maximum IO base address 0x0330 # IO base alignment 1 bytes # Number of IO addresses required: 2 # (IO 1 (SIZE 2) (BASE 0x0330)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0388 # Maximum IO base address 0x0388 # IO base alignment 1 bytes # Number of IO addresses required: 4 # (IO 2 (SIZE 4) (BASE 0x0388)) # Start dependent functions: priority acceptable # IRQ 5, 7, 9 or 10. # High true, edge sensitive interrupt (by default) # (INT 0 (IRQ 5 (MODE +E))) # First DMA channel 1 or 3. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode # (DMA 0 (CHANNEL 1)) # Next DMA channel 5 or 7. # 16 bit DMA only # Logical device is a bus master # DMA may not execute in count by byte mode # DMA may execute in count by word mode # DMA channel speed in compatible mode # (DMA 1 (CHANNEL 5)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0220 # Maximum IO base address 0x0280 # IO base alignment 32 bytes # Number of IO addresses required: 16 # (IO 0 (SIZE 16) (BASE 0x0220)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0300 # Maximum IO base address 0x0330 # IO base alignment 48 bytes # Number of IO addresses required: 2 # (IO 1 (SIZE 2) (BASE 0x0300)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0388 # Maximum IO base address 0x0388 # IO base alignment 1 bytes # Number of IO addresses required: 4 # (IO 2 (SIZE 4) (BASE 0x0388)) # Start dependent functions: priority acceptable # IRQ 5, 7, 9 or 10. # High true, edge sensitive interrupt (by default) # (INT 0 (IRQ 5 (MODE +E))) # First DMA channel 1 or 3. # 8 bit DMA only # Logical device is a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode # (DMA 0 (CHANNEL 1)) # Next DMA channel 5 or 7. # 16 bit DMA only # Logical device is a bus master # DMA may not execute in count by byte mode # DMA may execute in count by word mode # DMA channel speed in compatible mode # (DMA 1 (CHANNEL 5)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0220 # Maximum IO base address 0x0280 # IO base alignment 32 bytes # Number of IO addresses required: 16 # (IO 0 (SIZE 16) (BASE 0x0220)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0300 # Maximum IO base address 0x0330 # IO base alignment 48 bytes # Number of IO addresses required: 2 # (IO 1 (SIZE 2) (BASE 0x0300)) # Start dependent functions: priority functional # IRQ 5, 7, 9 or 10. # High true, edge sensitive interrupt (by default) # (INT 0 (IRQ 5 (MODE +E))) # First DMA channel 1 or 3. # 8 bit DMA only # Logical device is a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode # (DMA 0 (CHANNEL 1)) # Next DMA channel 5 or 7. # 16 bit DMA only # Logical device is a bus master # DMA may not execute in count by byte mode # DMA may execute in count by word mode # DMA channel speed in compatible mode # (DMA 1 (CHANNEL 5)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0220 # Maximum IO base address 0x0280 # IO base alignment 32 bytes # Number of IO addresses required: 16 # (IO 0 (SIZE 16) (BASE 0x0220)) # Start dependent functions: priority functional # IRQ 5, 7, 9 or 10. # High true, edge sensitive interrupt (by default) # (INT 0 (IRQ 5 (MODE +E))) # First DMA channel 1 or 3. # 8 bit DMA only # Logical device is a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode # (DMA 0 (CHANNEL 1)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0220 # Maximum IO base address 0x0280 # IO base alignment 32 bytes # Number of IO addresses required: 16 # (IO 0 (SIZE 16) (BASE 0x0220)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0300 # Maximum IO base address 0x0330 # IO base alignment 48 bytes # Number of IO addresses required: 2 # (IO 1 (SIZE 2) (BASE 0x0300)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0388 # Maximum IO base address 0x0388 # IO base alignment 1 bytes # Number of IO addresses required: 4 # (IO 2 (SIZE 4) (BASE 0x0388)) # Start dependent functions: priority functional # IRQ 5, 7, 9 or 10. # High true, edge sensitive interrupt (by default) # (INT 0 (IRQ 5 (MODE +E))) # First DMA channel 1 or 3. # 8 bit DMA only # Logical device is a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode # (DMA 0 (CHANNEL 1)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0220 # Maximum IO base address 0x0280 # IO base alignment 32 bytes # Number of IO addresses required: 16 # (IO 0 (SIZE 16) (BASE 0x0220)) # End dependent functions (NAME "CTL0070/-1[0]{Audio }") # (ACT Y) )) # # Logical device id CTL7001 # Device supports vendor reserved register @ 0x3b # # Edit the entries below to uncomment out the configuration required. # Note that only the first value of any range is given, this may be changed if required # Don't forget to uncomment the activate (ACT Y) when happy (CONFIGURE CTL0070/-1 (LD 1 # Compatible device id PNPb02f # ANSI string -->Game<-- # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0200 # Maximum IO base address 0x0200 # IO base alignment 1 bytes # Number of IO addresses required: 8 # (IO 0 (SIZE 8) (BASE 0x0200)) (NAME "CTL0070/-1[1]{Game }") # (ACT Y) )) # End tag... Checksum 0x00 (OK) # Card 2: (serial identifier 35 00 00 00 01 02 e0 86 34) # Vendor Id MDFe002, Serial Number 1, checksum 0x35. # Version 1.0, Vendor version 1.0 # ANSI string -->FM Radio Tuner<-- # # Logical device id MFRad10 # Device supports vendor reserved register @ 0x3b # # Edit the entries below to uncomment out the configuration required. # Note that only the first value of any range is given, this may be changed if required # Don't forget to uncomment the activate (ACT Y) when happy (CONFIGURE MDFe002/1 (LD 0 # Multiple choice time, choose one only ! # Start dependent functions: priority preferred # Fixed IO base address 0x0384 # Number of IO addresses required: 2 # (IO 0 (SIZE 2) (BASE 0x0384)) # Start dependent functions: priority preferred # Fixed IO base address 0x0284 # Number of IO addresses required: 2 # (IO 0 (SIZE 2) (BASE 0x0284)) # Start dependent functions: priority acceptable # Fixed IO base address 0x0384 # Number of IO addresses required: 2 # (IO 0 (SIZE 2) (BASE 0x0384)) # IRQ 3, 5, 6, 7 or 9. # High true, edge sensitive interrupt (by default) # (INT 0 (IRQ 3 (MODE +E))) # Start dependent functions: priority acceptable # Fixed IO base address 0x0284 # Number of IO addresses required: 2 # (IO 0 (SIZE 2) (BASE 0x0284)) # IRQ 3, 5, 6, 7 or 9. # High true, edge sensitive interrupt (by default) # (INT 0 (IRQ 3 (MODE +E))) # End dependent functions (NAME "MDFe002/1[0]{FM Radio Tuner }") # (ACT Y) )) # End tag... Checksum 0x00 (OK) # Returns all cards to the "Wait for Key" state (WAITFORKEY) ------------621C7C720DAFA8F--