* [mdk-re] USR Sportster Voice 33.6 Faxmodem (внешний) @ 2001-11-17 22:09 Sergey Kuznetsov 2001-11-17 23:11 ` [mdk-re] " Konstantin Lepikhov 0 siblings, 1 reply; 13+ messages in thread From: Sergey Kuznetsov @ 2001-11-17 22:09 UTC (permalink / raw) To: mandrake-russian Уважаемое сообщество! Стоит Spring, почти без обновлений. Ядро 2.2.18. В предверие недалекого (надеюсь) апгрейда взял "на попробовать" subj%. Модем воткнут в COM1, в BIOS'е прописано: PnP OS = No, с параметрами порта игрался по-всякому: и то, что по умолчанию, и Auto, и Disabled. Не видит его система (в offtopic все OK). На Harddrake давно уже рукой махнул, но и опрос модема через kppp и Linuxconf тоже ничего не дает. Kppp при Disabled пишет "модем занят", в остальных случаях не видит его вообще. Linuxconf находит только его собрата на COM2 (такой же модем, только внутренний). Сижу, читаю Modem-HOWTO и понимаю, что не понимаю ничего :-((. Подскажите, пожалуйста, на какие грабли я наступил и куда надо глядеть? С уважением, Сергей ^ permalink raw reply [flat|nested] 13+ messages in thread
* [mdk-re] Re: USR Sportster Voice 33.6 Faxmodem (внешний) 2001-11-17 22:09 [mdk-re] USR Sportster Voice 33.6 Faxmodem (внешний) Sergey Kuznetsov @ 2001-11-17 23:11 ` Konstantin Lepikhov 2001-11-18 11:42 ` [mdk-re] " Sergey Kuznetsov 0 siblings, 1 reply; 13+ messages in thread From: Konstantin Lepikhov @ 2001-11-17 23:11 UTC (permalink / raw) To: mandrake-russian Здравствуйте! Когда-то, в Сбт Ноя 17 2001, 10:17:56 +0300, Sergey Kuznetsov написал(а): > Уважаемое сообщество! > > Стоит Spring, почти без обновлений. Ядро 2.2.18. В предверие > недалекого (надеюсь) апгрейда взял "на попробовать" subj%. Модем > воткнут в COM1, в BIOS'е прописано: PnP OS = No, с параметрами порта > игрался по-всякому: и то, что по умолчанию, и Auto, и Disabled. Не > видит его система (в offtopic все OK). На Harddrake давно уже рукой А что говорит setserial /dev/ttyS0 и pnpdump? -- with best regards, ICQ: 109916175 Konstantin Lepikhov mailto:lakostis@pisem.net Motto: Linux is like a wigwam - no windows, no gates, apache inside! ^ permalink raw reply [flat|nested] 13+ messages in thread
* [mdk-re] Re: [mdk-re] Re: USR Sportster Voice 33.6 Faxmodem (внешний) 2001-11-17 23:11 ` [mdk-re] " Konstantin Lepikhov @ 2001-11-18 11:42 ` Sergey Kuznetsov 2001-11-18 14:03 ` AVL 2001-11-19 7:36 ` [mdk-re] Re: [mdk-re] Re: USR Sportster Voice 33.6 Faxmodem (×ÎÅÛÎÉÊ) Russu V.F. 0 siblings, 2 replies; 13+ messages in thread From: Sergey Kuznetsov @ 2001-11-18 11:42 UTC (permalink / raw) To: Konstantin Lepikhov > Здравствуйте! Добрый день, Константин! >> Уважаемое сообщество! >> >> Стоит Spring, почти без обновлений. Ядро 2.2.18. В предверие >> недалекого (надеюсь) апгрейда взял "на попробовать" subj%. Модем >> воткнут в COM1, в BIOS'е прописано: PnP OS = No, с параметрами порта >> игрался по-всякому: и то, что по умолчанию, и Auto, и Disabled. Не >> видит его система (в offtopic все OK). На Harddrake давно уже рукой > А что говорит setserial /dev/ttyS0 и pnpdump? > Вот вывод обеих команд: setserial /dev/ttyS0 /dev/ttyS0, UART: unknown, Port: 0x03f8, IRQ: 4 pnpdump # $Id: pnpdump_main.c,v 1.25 2001/01/06 20:45:58 fox Exp $ # Release isapnptools-1.24 # # This is free software, see the sources for details. # This software has NO WARRANTY, use at your OWN RISK # # For details of the output file format, see isapnp.conf(5) # # For latest information and FAQ on isapnp and pnpdump see: # http://www.roestock.demon.co.uk/isapnptools/ # # Compiler flags: -DREALTIME -DHAVE_PROC -DENABLE_PCI -DHAVE_SCHED_SETSCHEDULER -DHAVE_NANOSLEEP -DWANT_TO_VALIDATE # # Trying port address 0273 # Trying port address 027b # Trying port address 0283 # Trying port address 028b # Trying port address 0293 # Trying port address 029b # Trying port address 02a3 # Trying port address 02ab # Trying port address 02b3 # Trying port address 02bb # Trying port address 02c3 # Trying port address 02cb # Trying port address 02d3 # Trying port address 02db # Trying port address 02e3 # Trying port address 02f3 # Trying port address 0303 # Trying port address 030b # Trying port address 0313 # Trying port address 031b # Trying port address 0323 # Trying port address 032b # Trying port address 0333 # Trying port address 033b # Trying port address 0343 # Trying port address 034b # Trying port address 0353 # Trying port address 035b # Trying port address 0363 # Trying port address 036b # Trying port address 0373 # Trying port address 037b # Trying port address 0383 # Trying port address 038b # Trying port address 0393 # Trying port address 039b # Trying port address 03a3 # Trying port address 03ab # Trying port address 03b3 # Trying port address 03bb # Trying port address 03e3 # Trying port address 03eb # Trying port address 03f3 # No boards found (В BIOS'е COM1 сейчас стоит на Disabled) С уважением, Сергей ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [mdk-re] Re: [mdk-re] Re: USR Sportster Voice 33.6 Faxmodem (внешний) 2001-11-18 11:42 ` [mdk-re] " Sergey Kuznetsov @ 2001-11-18 14:03 ` AVL 2001-11-18 23:38 ` [mdk-re] Linux PnP support (was: USR Sportster Voice 33.6 Faxmodem (×ÎÅÛÎÉÊ)) Serge Skorokhodov 2001-11-20 0:38 ` [mdk-re] Re[2]: [mdk-re] Re: [mdk-re] Re: USR Sportster Voice 33.6 Faxmodem (внешний) Sergey Kuznetsov 2001-11-19 7:36 ` [mdk-re] Re: [mdk-re] Re: USR Sportster Voice 33.6 Faxmodem (×ÎÅÛÎÉÊ) Russu V.F. 1 sibling, 2 replies; 13+ messages in thread From: AVL @ 2001-11-18 14:03 UTC (permalink / raw) To: mandrake-russian > (В BIOS'е COM1 сейчас стоит на Disabled) а какой смысл? модем внешний? поставьте com1 и com3 в биосе, как положено pnp os - yes и тогда уж играйте. должен все подхватить на лету и как по маслу. прямо dmesg должен все рассказать про порт как минимум. ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [mdk-re] Linux PnP support (was: USR Sportster Voice 33.6 Faxmodem (×ÎÅÛÎÉÊ)) 2001-11-18 14:03 ` AVL @ 2001-11-18 23:38 ` Serge Skorokhodov 2001-11-19 1:01 ` [mdk-re] Linux PnP support (was: USR Sportster Voice 33.6 Faxmodem (внешний)) AVL 2001-11-20 0:38 ` [mdk-re] Re[2]: [mdk-re] Re: [mdk-re] Re: USR Sportster Voice 33.6 Faxmodem (внешний) Sergey Kuznetsov 1 sibling, 1 reply; 13+ messages in thread From: Serge Skorokhodov @ 2001-11-18 23:38 UTC (permalink / raw) To: AVL Здравствуйте! >> (В BIOS'е COM1 сейчас стоит на Disabled) A> а какой смысл? A> модем внешний? A> поставьте com1 и com3 в биосе, как положено A> pnp os - yes Вроде раньше для Linux рекомендовалось устанавливать этот параметр в no. Концепция поменялась? Я что-то путаю? <skip> -- Serge Skorokhodov aka suralis 18.11.2001 suralis-s@mtu-net.ru ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [mdk-re] Linux PnP support (was: USR Sportster Voice 33.6 Faxmodem (внешний)) 2001-11-18 23:38 ` [mdk-re] Linux PnP support (was: USR Sportster Voice 33.6 Faxmodem (×ÎÅÛÎÉÊ)) Serge Skorokhodov @ 2001-11-19 1:01 ` AVL 2001-11-20 0:38 ` [mdk-re] Re[2]: " Sergey Kuznetsov 0 siblings, 1 reply; 13+ messages in thread From: AVL @ 2001-11-19 1:01 UTC (permalink / raw) To: mandrake-russian On Sun, 18 Nov 2001 23:20:18 +0300 Serge Skorokhodov <suralis-s@mtu-net.ru> wrote: > Здравствуйте! > > > >> (В BIOS'е COM1 сейчас стоит на Disabled) > > A> а какой смысл? > A> модем внешний? > A> поставьте com1 и com3 в биосе, как положено > > A> pnp os - yes > > Вроде раньше для Linux рекомендовалось устанавливать этот > параметр в no. Концепция поменялась? Я что-то путаю? да имхо не принципно это все. у меня давно уже стоит в yes. от этого зависит только начальная инициализация устройств. в серии 2.4 такую малость давно уже сделали да и в 2.2 тоже. просто странно отключить порт, присобачить кэтому заведомо отключенному порту модем и ждать, что кто то его обнаружит. С таким же успехом этот модем можно продетектить не вынимая его из упаковки. :) уж чего-чего а _внешние_ сериальные рабочие модемы проблем в принципе не могут иметь. ^ permalink raw reply [flat|nested] 13+ messages in thread
* [mdk-re] Re[2]: [mdk-re] Linux PnP support (was: USR Sportster Voice 33.6 Faxmodem (внешний)) 2001-11-19 1:01 ` [mdk-re] Linux PnP support (was: USR Sportster Voice 33.6 Faxmodem (внешний)) AVL @ 2001-11-20 0:38 ` Sergey Kuznetsov 0 siblings, 0 replies; 13+ messages in thread From: Sergey Kuznetsov @ 2001-11-20 0:38 UTC (permalink / raw) To: AVL >> >> (В BIOS'е COM1 сейчас стоит на Disabled) >> >> A> а какой смысл? >> A> модем внешний? >> A> поставьте com1 и com3 в биосе, как положено >> >> A> pnp os - yes >> >> Вроде раньше для Linux рекомендовалось устанавливать этот >> параметр в no. Концепция поменялась? Я что-то путаю? > > да имхо не принципно это все. > у меня давно уже стоит в yes. > от этого зависит только начальная инициализация устройств. в серии 2.4 такую малость давно уже сделали да и в 2.2 тоже. > > просто странно отключить порт, присобачить кэтому заведомо отключенному порту модем и ждать, что кто то его обнаружит. С таким же успехом этот модем можно продетектить не вынимая его из упаковки. :) > уж чего-чего а _внешние_ сериальные рабочие модемы проблем в принципе не могут иметь. Это уже с горя было сделано, вначале, естественно, порт был включен. Я тоже с этим модемом граблей не ждал, да вот поди ж ты... Подскажите, куда еще смотреть? С уважением, Сергей ^ permalink raw reply [flat|nested] 13+ messages in thread
* [mdk-re] Re[2]: [mdk-re] Re: [mdk-re] Re: USR Sportster Voice 33.6 Faxmodem (внешний) 2001-11-18 14:03 ` AVL 2001-11-18 23:38 ` [mdk-re] Linux PnP support (was: USR Sportster Voice 33.6 Faxmodem (×ÎÅÛÎÉÊ)) Serge Skorokhodov @ 2001-11-20 0:38 ` Sergey Kuznetsov 2001-11-20 1:42 ` AVL 1 sibling, 1 reply; 13+ messages in thread From: Sergey Kuznetsov @ 2001-11-20 0:38 UTC (permalink / raw) To: AVL >> (В BIOS'е COM1 сейчас стоит на Disabled) > > а какой смысл? > модем внешний? > поставьте com1 и com3 в биосе, как положено > > pnp os - yes > > и тогда уж играйте. > должен все подхватить на лету и как по маслу. > прямо dmesg должен все рассказать про порт как минимум. И так пробовал, последний раз, по вашему совету, с PnP OS = yes. Не видит все равно. Вот вывод dmesg: [yozhik@localhost yozhik]$ dmesg Linux version 2.2.18-ipl5mdk-up (ldv@basalt.office.altlinux.ru) (gcc version 2.95.3 19991030 ((Linux-Mandrake RE Spring 2001, for backwards compatibility)) #1 Sat Mar 17 21:39:18 MSK 2001 USER-provided physical RAM map: USER: 0009f000 @ 00000000 (usable) USER: 07ef0000 @ 00100000 (usable) Detected 504038 kHz processor. ide_setup: ide1=autotune ide_setup: ide0=autotune Console: colour VGA+ 80x25 Calibrating delay loop... 1005.97 BogoMIPS Memory: 127488k/131008k available (1300k kernel code, 408k reserved, 1736k data, 76k init, 0k bigmem) Dentry hash table entries: 16384 (order 5, 128k) Buffer cache hash table entries: 131072 (order 7, 512k) Page cache hash table entries: 32768 (order 5, 128k) Inode hash table entries: 16384 (128k), inode-max: 16376 VFS: Diskquotas version dquot_6.4.0 initialized CPU serial number disabled. Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. 512K L2 cache (4 way) CPU: L2 Cache: 512K CPU: Intel Pentium III (Katmai) stepping 03 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au) PCI: PCI BIOS revision 2.10 entry at 0xfafe0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP TCP: Hash tables configured (ehash 131072 bhash 65536) IPVS: Connection hash table configured (size=4096, memory=32Kbytes) Linux IP multicast router 0.06 plus PIM-SM Initializing RT netlink socket Starting kswapd v 1.5 Detected PS/2 Mouse Port. Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A ttyS03 at 0x02e8 (irq = 3) is a 16550A pty: 256 Unix98 ptys configured Real Time Clock Driver v1.09 RAM disk driver initialized: 16 RAM disks of 4096K size loop: registered device at major 7 Uniform Multi-Platform E-IDE driver Revision: 6.30 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA hda: IBM-DTLA-305020, ATA DISK drive hdb: SAMSUNG WN316025A (1.6 GB), ATA DISK drive hdd: _NEC DV-5700A, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: IBM-DTLA-305020, 19623MB w/380kB Cache, CHS=2501/255/63, UDMA(33) hdb: SAMSUNG WN316025A (1.6 GB), 1536MB w/109kB Cache, CHS=780/64/63, DMA hdd: ATAPI 40X DVD-ROM drive, 256kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.11 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12 raid5: measuring checksumming speed raid5: KNI detected, trying cache-avoiding KNI checksum routine pIII_kni : 1035.558 MB/sec raid5: MMX detected, trying high-speed MMX checksum routines pII_mmx : 1122.807 MB/sec p5_mmx : 1173.480 MB/sec 8regs : 899.160 MB/sec 32regs : 485.775 MB/sec using fastest function: pIII_kni (1035.558 MB/sec) scsi : 0 hosts. scsi : detected total. NET4: Frame Diverter 0.5 md.c: sizeof(mdp_super_t) = 4096 Partition check: hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 hda14 hda15 hda16 hda17 > hdb: hdb2 < hdb5 > autodetecting RAID arrays autorun ... ... autorun DONE. apm: BIOS version 1.2 Flags 0x07 (Driver version 1.13) VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 76k freed Executing init=/sbin/init Adding Swap: 136512k swap-space (priority -1) Checking ReiserFS transaction log (device 03:11) ... Using r5 hash to sort names Sponsored by thresholdnetworks.com, emusic.com, bigstorage.com ReiserFS version 3.5.31 MSDOS FS: Using codepage 866 MSDOS FS: IO charset koi8-r MSDOS FS: Using codepage 866 MSDOS FS: IO charset koi8-r MSDOS FS: Using codepage 866 MSDOS FS: IO charset koi8-r MSDOS FS: Using codepage 866 MSDOS FS: IO charset koi8-r MSDOS FS: Using codepage 866 MSDOS FS: IO charset koi8-r MSDOS FS: Using codepage 866 MSDOS FS: IO charset koi8-r MSDOS FS: Using codepage 866 MSDOS FS: IO charset koi8-r MSDOS FS: Using codepage 866 MSDOS FS: IO charset koi8-r Checking ReiserFS transaction log (device 03:10) ... Using r5 hash to sort names ReiserFS version 3.5.31 CSLIP: code copyright 1989 Regents of the University of California PPP: version 2.3.7 (demand dialling) PPP line discipline registered. lp: no devices found lp: no devices found lp: no devices found lp: no devices found lp: no devices found lp: no devices found [yozhik@localhost yozhik]$ Что примечательно: в оффтопике на включенном модеме горят индикаторы TR и CS, а в Linux - только CS. Порт настроен в соответствии с выводом setserial /dev/ttyS0 (0x03f8, irq4). Модем все равно не виден, чем ни опрашивай. Не знаю, относится ли это к делу, но до этого, как я уже писал, я работал через внутренний Sportster на COM2, irq3. /dev/modem сейчас перекинут на /dev/ttyS0, но может надо еще что-то поменять? С уважением, Сергей ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [mdk-re] Re[2]: [mdk-re] Re: [mdk-re] Re: USR Sportster Voice 33.6 Faxmodem (внешний) 2001-11-20 0:38 ` [mdk-re] Re[2]: [mdk-re] Re: [mdk-re] Re: USR Sportster Voice 33.6 Faxmodem (внешний) Sergey Kuznetsov @ 2001-11-20 1:42 ` AVL 2001-11-20 22:59 ` [mdk-re] Re[2]: " Sergey Kuznetsov 0 siblings, 1 reply; 13+ messages in thread From: AVL @ 2001-11-20 1:42 UTC (permalink / raw) To: mandrake-russian On Tue, 20 Nov 2001 00:31:45 +0300 Sergey Kuznetsov <skuznetsov@comail.ru> wrote: > И так пробовал, последний раз, по вашему совету, с PnP OS = yes. Не > видит все равно. Вот вывод dmesg: да номально все определилось. Это тупой модем. со спортсерами такое бывает. > Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled > ttyS00 at 0x03f8 (irq = 4) is a 16550A > ttyS01 at 0x02f8 (irq = 3) is a 16550A > ttyS03 at 0x02e8 (irq = 3) is a 16550A <-- тут должно быть 4 прерывание. кто здесь сидит? вот здесь вопросы. что подключено к портам помимо внешнего модема? почему com2 и com3 на одном прерывании? стандартно они на разных. чья это работа? > Что примечательно: в оффтопике на включенном модеме горят индикаторы > TR и CS, а в Linux - только CS. это ерунда. к делу не относится. > Порт настроен в соответствии с выводом > setserial /dev/ttyS0 (0x03f8, irq4). Модем все равно не виден, чем ни > опрашивай. Не знаю, относится ли это к делу, но до этого, как я уже > писал, я работал через внутренний Sportster на COM2, irq3. /dev/modem > сейчас перекинут на /dev/ttyS0, но может надо еще что-то поменять? предлагаю по плохому, раз по хорошему никак. 1)вставить внутренний модем. 2)проверить, что работает на com2 minicom желательно запустить для этого 3)вытащить его и поставить в биосе com3 на com2 4)проверить setserial /dev/ttyS1 что параметры те же что и были у внутреннего 4) подключить к этому порту модем и тем же minicom проверить его. железно должен заработать, если шлейфы и порт в порядке. (проверить в винде или где он там работает) ^ permalink raw reply [flat|nested] 13+ messages in thread
* [mdk-re] Re[2]: [mdk-re] Re[2]: [mdk-re] Re: [mdk-re] Re: USR Sportster Voice 33.6 Faxmodem (внешний) 2001-11-20 1:42 ` AVL @ 2001-11-20 22:59 ` Sergey Kuznetsov 2001-11-21 21:28 ` AVL 0 siblings, 1 reply; 13+ messages in thread From: Sergey Kuznetsov @ 2001-11-20 22:59 UTC (permalink / raw) To: AVL >> Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled >> ttyS00 at 0x03f8 (irq = 4) is a 16550A >> ttyS01 at 0x02f8 (irq = 3) is a 16550A >> ttyS03 at 0x02e8 (irq = 3) is a 16550A <-- тут должно быть 4 прерывание. кто здесь сидит? ^^^ > вот здесь вопросы. > что подключено к портам помимо внешнего модема? > почему com2 и com3 на одном прерывании? > стандартно они на разных. чья это работа? ttyS03 - это COM4, потому он и на irq3. А на COM2, irq3 по-прежнему сидит ВНУТРЕННИЙ Sportster, только в линию не воткнут. > > предлагаю по плохому, раз по хорошему никак. > 1)вставить внутренний модем. > 2)проверить, что работает на com2 minicom желательно запустить для этого > 3)вытащить его и поставить в биосе com3 на com2 > 4)проверить setserial /dev/ttyS1 что параметры те же что и были у внутреннего > 4) подключить к этому порту модем и тем же minicom проверить его. > > железно должен заработать, если шлейфы и порт в порядке. (проверить в винде или где он там работает) А вот этот способ мне в голову не приходил. Буду пробовать, спасибо! P.S. Если поубивать лишние Re[2]: [mdk-re] в поле тема цепочка прервется, или это можно сделать безболезненно? С уважением, Сергей ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [mdk-re] Re[2]: [mdk-re] Re[2]: [mdk-re] Re: [mdk-re] Re: USR Sportster Voice 33.6 Faxmodem (внешний) 2001-11-20 22:59 ` [mdk-re] Re[2]: " Sergey Kuznetsov @ 2001-11-21 21:28 ` AVL 2001-11-22 11:36 ` Andrey Brindeew 0 siblings, 1 reply; 13+ messages in thread From: AVL @ 2001-11-21 21:28 UTC (permalink / raw) To: mandrake-russian > P.S. Если поубивать лишние Re[2]: [mdk-re] в поле тема цепочка > прервется, или это можно сделать безболезненно? легко. за цепочки отвечает поле reply-to в заголовках письма. еще одна мысль вдогонку. если поднят ненастроеный gpm то он как раз вешается на com1 и тогда модем работать не будет. можно сделать service gpm stop для эксперимента. ^ permalink raw reply [flat|nested] 13+ messages in thread
* [mdk-re] Re: USR Sportster Voice 33.6 Faxmodem (внешний) 2001-11-21 21:28 ` AVL @ 2001-11-22 11:36 ` Andrey Brindeew 0 siblings, 0 replies; 13+ messages in thread From: Andrey Brindeew @ 2001-11-22 11:36 UTC (permalink / raw) To: mandrake-russian [-- Attachment #1: Type: text/plain, Size: 281 bytes --] On Wed, 21 Nov 2001 16:55:27 +0300 AVL <info@atmsk.ru> wrote: > легко. > за цепочки отвечает поле reply-to в заголовках письма. Если быть более точным, то In-Reply-To & References. -- WBR, Andrey Brindeew. "No one person can understand Perl culture completely" (C) Larry Wall. [-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --] ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [mdk-re] Re: [mdk-re] Re: USR Sportster Voice 33.6 Faxmodem (×ÎÅÛÎÉÊ) 2001-11-18 11:42 ` [mdk-re] " Sergey Kuznetsov 2001-11-18 14:03 ` AVL @ 2001-11-19 7:36 ` Russu V.F. 1 sibling, 0 replies; 13+ messages in thread From: Russu V.F. @ 2001-11-19 7:36 UTC (permalink / raw) To: mandrake-russian-admin@altlinux.ru Hello mandrake-russian-admin, Sunday, November 18, 2001, 1:51:28 PM, you wrote: > (В BIOS'е COM1 сейчас стоит на Disabled) а зачем СОМ1 выключен то ???? -- ОП ТюменьЭнергоСпецРемонт Системный администратор Руссу В.Ф. e-mail: ruwa@psrp.te.ru phone: (3462)76-40-56 ^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2001-11-22 11:36 UTC | newest] Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2001-11-17 22:09 [mdk-re] USR Sportster Voice 33.6 Faxmodem (внешний) Sergey Kuznetsov 2001-11-17 23:11 ` [mdk-re] " Konstantin Lepikhov 2001-11-18 11:42 ` [mdk-re] " Sergey Kuznetsov 2001-11-18 14:03 ` AVL 2001-11-18 23:38 ` [mdk-re] Linux PnP support (was: USR Sportster Voice 33.6 Faxmodem (×ÎÅÛÎÉÊ)) Serge Skorokhodov 2001-11-19 1:01 ` [mdk-re] Linux PnP support (was: USR Sportster Voice 33.6 Faxmodem (внешний)) AVL 2001-11-20 0:38 ` [mdk-re] Re[2]: " Sergey Kuznetsov 2001-11-20 0:38 ` [mdk-re] Re[2]: [mdk-re] Re: [mdk-re] Re: USR Sportster Voice 33.6 Faxmodem (внешний) Sergey Kuznetsov 2001-11-20 1:42 ` AVL 2001-11-20 22:59 ` [mdk-re] Re[2]: " Sergey Kuznetsov 2001-11-21 21:28 ` AVL 2001-11-22 11:36 ` Andrey Brindeew 2001-11-19 7:36 ` [mdk-re] Re: [mdk-re] Re: USR Sportster Voice 33.6 Faxmodem (×ÎÅÛÎÉÊ) Russu V.F.
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git