* [Comm] bcm44x + ALM2.4 @ 2005-01-10 15:39 georginus 2005-01-10 19:06 ` [Comm] " Michael Shigorin 0 siblings, 1 reply; 16+ messages in thread From: georginus @ 2005-01-10 15:39 UTC (permalink / raw) To: community Здравствуйте, все. Имеется сетевая карта Asustek на broadcom 440. Никак не получается заставить ее работать на АЛМ 2.4 + Сизиф :( при запуске drakconf данного драйвера нет в списке, хотя в /lib/modules/kernel/2.4.26-std-up/drivers файл драйвера присутствует. Прошу помощи в настройке сабжа. Заранее спасибо. -- С уважением, georginus mailto:georginus@galaktika.by ^ permalink raw reply [flat|nested] 16+ messages in thread
* [Comm] Re: bcm44x + ALM2.4 2005-01-10 15:39 [Comm] bcm44x + ALM2.4 georginus @ 2005-01-10 19:06 ` Michael Shigorin 2005-01-11 7:40 ` georginus 0 siblings, 1 reply; 16+ messages in thread From: Michael Shigorin @ 2005-01-10 19:06 UTC (permalink / raw) To: community On Mon, Jan 10, 2005 at 05:39:44PM +0200, georginus wrote: > Прошу помощи в настройке сабжа. modprobe tg3 -- ---- WBR, Michael Shigorin <mike@altlinux.ru> ------ Linux.Kiev http://www.linux.kiev.ua/ ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Comm] Re: bcm44x + ALM2.4 2005-01-10 19:06 ` [Comm] " Michael Shigorin @ 2005-01-11 7:40 ` georginus 2005-01-11 9:25 ` Valery V. Inozemtsev 0 siblings, 1 reply; 16+ messages in thread From: georginus @ 2005-01-11 7:40 UTC (permalink / raw) To: community Здравствуйте, Michael. Вы писали 10 января 2005 г., 21:06:34: > On Mon, Jan 10, 2005 at 05:39:44PM +0200, georginus wrote: >> Прошу помощи в настройке сабжа. > modprobe tg3 [root@localhost root]# modprobe tg3 /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: insmod /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o failed /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: insmod tg3 failed [root@localhost root]# -- С уважением, georginus mailto:georginus@galaktika.by ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Comm] Re: bcm44x + ALM2.4 2005-01-11 7:40 ` georginus @ 2005-01-11 9:25 ` Valery V. Inozemtsev 2005-01-11 9:32 ` Re[2]: " georginus 0 siblings, 1 reply; 16+ messages in thread From: Valery V. Inozemtsev @ 2005-01-11 9:25 UTC (permalink / raw) To: community [-- Attachment #1: Type: text/plain, Size: 936 bytes --] В сообщении от 11 Январь 2005 10:40 georginus написал(a): > Здравствуйте, Michael. > > Вы писали 10 января 2005 г., 21:06:34: > > On Mon, Jan 10, 2005 at 05:39:44PM +0200, georginus wrote: > >> Прошу помощи в настройке сабжа. > > > > modprobe tg3 > > [root@localhost root]# modprobe tg3 > /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: init_module: No > such device Hint: insmod errors can be caused by incorrect module > parameters, including invalid IO or IRQ parameters. You may find more > information in syslog or the output from dmesg > /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: insmod > /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o failed > /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: insmod tg3 failed > [root@localhost root]# modprobe b44 -- Valery V. Inozemtsev Powered by ALT Linux Sisyphus (20041230) ftp://ftp.altlinux.ru/pub/people/shrek/ [-- Attachment #2: Type: application/pgp-signature, Size: 190 bytes --] ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re[2]: [Comm] Re: bcm44x + ALM2.4 2005-01-11 9:25 ` Valery V. Inozemtsev @ 2005-01-11 9:32 ` georginus 2005-01-11 9:35 ` Valery V. Inozemtsev 0 siblings, 1 reply; 16+ messages in thread From: georginus @ 2005-01-11 9:32 UTC (permalink / raw) To: Valery V. Inozemtsev Здравствуйте, Valery. Вы писали 11 января 2005 г., 11:25:24: > В сообщении от 11 Январь 2005 10:40 georginus написал(a): >> Здравствуйте, Michael. >> >> Вы писали 10 января 2005 г., 21:06:34: >> > On Mon, Jan 10, 2005 at 05:39:44PM +0200, georginus wrote: >> >> Прошу помощи в настройке сабжа. >> > >> > modprobe tg3 >> >> [root@localhost root]# modprobe tg3 >> /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: init_module: No >> such device Hint: insmod errors can be caused by incorrect module >> parameters, including invalid IO or IRQ parameters. You may find more >> information in syslog or the output from dmesg >> /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: insmod >> /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o failed >> /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: insmod tg3 failed >> [root@localhost root]# > modprobe b44 это проходит нормально, по lsmod b44 есть, но сеть все равно не работает. может нужно какие-нибудь конфиги ручками поправить? -- С уважением, georginus mailto:georginus@galaktika.by ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Comm] Re: bcm44x + ALM2.4 2005-01-11 9:32 ` Re[2]: " georginus @ 2005-01-11 9:35 ` Valery V. Inozemtsev 2005-01-11 9:36 ` Re[2]: " georginus 0 siblings, 1 reply; 16+ messages in thread From: Valery V. Inozemtsev @ 2005-01-11 9:35 UTC (permalink / raw) To: community [-- Attachment #1: Type: text/plain, Size: 1264 bytes --] В сообщении от 11 Январь 2005 12:32 georginus написал(a): > Здравствуйте, Valery. > > Вы писали 11 января 2005 г., 11:25:24: > > В сообщении от 11 Январь 2005 10:40 georginus написал(a): > >> Здравствуйте, Michael. > >> > >> Вы писали 10 января 2005 г., 21:06:34: > >> > On Mon, Jan 10, 2005 at 05:39:44PM +0200, georginus wrote: > >> >> Прошу помощи в настройке сабжа. > >> > > >> > modprobe tg3 > >> > >> [root@localhost root]# modprobe tg3 > >> /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: init_module: > >> No such device Hint: insmod errors can be caused by incorrect module > >> parameters, including invalid IO or IRQ parameters. You may find more > >> information in syslog or the output from dmesg > >> /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: insmod > >> /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o failed > >> /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: insmod tg3 > >> failed [root@localhost root]# > > > > modprobe b44 > > это проходит нормально, по lsmod b44 есть, но сеть все равно не > работает. может нужно какие-нибудь конфиги ручками поправить? /etc/modules.conf alias eth0 b44 -- Valery V. Inozemtsev Powered by ALT Linux Sisyphus (20041230) ftp://ftp.altlinux.ru/pub/people/shrek/ [-- Attachment #2: Type: application/pgp-signature, Size: 190 bytes --] ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re[2]: [Comm] Re: bcm44x + ALM2.4 2005-01-11 9:35 ` Valery V. Inozemtsev @ 2005-01-11 9:36 ` georginus 2005-01-11 9:41 ` Valery V. Inozemtsev 2005-01-11 9:44 ` Sasha Martsinuk 0 siblings, 2 replies; 16+ messages in thread From: georginus @ 2005-01-11 9:36 UTC (permalink / raw) To: community Здравствуйте, Valery. Вы писали 11 января 2005 г., 11:35:27: > В сообщении от 11 Январь 2005 12:32 georginus написал(a): >> Здравствуйте, Valery. >> >> Вы писали 11 января 2005 г., 11:25:24: >> > В сообщении от 11 Январь 2005 10:40 georginus написал(a): >> >> Здравствуйте, Michael. >> >> >> >> Вы писали 10 января 2005 г., 21:06:34: >> >> > On Mon, Jan 10, 2005 at 05:39:44PM +0200, georginus wrote: >> >> >> Прошу помощи в настройке сабжа. >> >> > >> >> > modprobe tg3 >> >> >> >> [root@localhost root]# modprobe tg3 >> >> /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: init_module: >> >> No such device Hint: insmod errors can be caused by incorrect module >> >> parameters, including invalid IO or IRQ parameters. You may find more >> >> information in syslog or the output from dmesg >> >> /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: insmod >> >> /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o failed >> >> /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: insmod tg3 >> >> failed [root@localhost root]# >> > >> > modprobe b44 >> >> это проходит нормально, по lsmod b44 есть, но сеть все равно не >> работает. может нужно какие-нибудь конфиги ручками поправить? > /etc/modules.conf > alias eth0 b44 прописано -- С уважением, georginus mailto:georginus@galaktika.by ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Comm] Re: bcm44x + ALM2.4 2005-01-11 9:36 ` Re[2]: " georginus @ 2005-01-11 9:41 ` Valery V. Inozemtsev 2005-01-11 9:47 ` Re[2]: " georginus 2005-01-11 9:44 ` Sasha Martsinuk 1 sibling, 1 reply; 16+ messages in thread From: Valery V. Inozemtsev @ 2005-01-11 9:41 UTC (permalink / raw) To: community [-- Attachment #1: Type: text/plain, Size: 415 bytes --] В сообщении от 11 Январь 2005 12:36 georginus написал(a): <skip> > >> > > >> > modprobe b44 > >> > >> это проходит нормально, по lsmod b44 есть, но сеть все равно не > >> работает. может нужно какие-нибудь конфиги ручками поправить? > > > > /etc/modules.conf > > > > alias eth0 b44 > > прописано depmod -a -- Valery V. Inozemtsev Powered by ALT Linux Sisyphus (20041230) ftp://ftp.altlinux.ru/pub/people/shrek/ [-- Attachment #2: Type: application/pgp-signature, Size: 190 bytes --] ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re[2]: [Comm] Re: bcm44x + ALM2.4 2005-01-11 9:41 ` Valery V. Inozemtsev @ 2005-01-11 9:47 ` georginus 2005-01-11 9:58 ` Valery V. Inozemtsev 0 siblings, 1 reply; 16+ messages in thread From: georginus @ 2005-01-11 9:47 UTC (permalink / raw) To: community >> > /etc/modules.conf >> > >> > alias eth0 b44 >> >> прописано > depmod -a делал вот вывод dmesg: -- [root@localhost root]# dmesg : 0, 4096 bytes) Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz stepping 07 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=-1 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1800.1107 MHz. ..... host bus clock speed is 100.0060 MHz. cpu: 0, clocks: 1000060, slice: 500030 CPU0<T0:1000048,T1:500016,D:2,S:500030,C:1000060> mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20040326 PCI: PCI BIOS revision 2.10 entry at 0xf10f0, last bus=1 PCI: Using configuration type 1 Looking for DSDT in initrd ... not found! ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S3 S4 S5) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9 ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] PCI: Probing PCI hardware 00:00:02[A] -> 2-16 -> IRQ 16 level low 00:00:02[B] -> 2-17 -> IRQ 17 level low 00:00:02[C] -> 2-18 -> IRQ 18 level low 00:00:02[D] -> 2-19 -> IRQ 19 level low 00:00:03[B] -> 2-21 -> IRQ 21 level low 00:00:03[C] -> 2-22 -> IRQ 22 level low 00:00:03[D] -> 2-23 -> IRQ 23 level low number of MP IRQ sources: 16. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178080 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0080 An unexpected IO-APIC was found. If this kernel release is less than three months old please report this to linux-smp@vger.kernel.org .... register #02: 02000000 ....... : arbitration: 02 .... register #03: 00000001 ....... : Boot DT : 1 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 0 0 0 0 0 1 1 71 0a 001 01 0 0 0 0 0 1 1 79 0b 001 01 0 0 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 001 01 1 1 0 1 0 1 1 B1 11 001 01 1 1 0 1 0 1 1 B9 12 001 01 1 1 0 1 0 1 1 C1 13 001 01 1 1 0 1 0 1 1 C9 14 001 01 0 1 0 1 0 1 1 A9 15 001 01 1 1 0 1 0 1 1 D1 16 001 01 1 1 0 1 0 1 1 D9 17 001 01 1 1 0 1 0 1 1 E1 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ20 -> 0:20 IRQ21 -> 0:21 IRQ22 -> 0:22 IRQ23 -> 0:23 .................................... done. PCI: Using ACPI for IRQ routing Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd kinoded started VFS: Disk quotas vdquot_6.5.1 vesafb: framebuffer at 0xe8000000, mapped to 0xde80a000, size 3072k vesafb: mode is 1024x768x16, linelength=2048, pages=4 vesafb: protected mode interface info at cbbb:000c vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Looking for splash picture.... found (1024x768, 53283 bytes, v2). Console: switching to colour frame buffer device 106x34 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 00:02.5 SIS5513: chipset revision 0 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:DMA, hdd:pio hda: TOSHIBA MK2018GAP, ATA DISK drive blk: queue c03039e0, I/O limit 4095Mb (mask 0xffffffff) hdc: QSI CD-ROM SCR-242, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 39070080 sectors (20004 MB), CHS=2432/255/63, UDMA(100) Partition check: hda: hda1 < hda5 hda6 hda7 hda8 > hda2 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 152k freed VFS: Mounted root (romfs filesystem) readonly. Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 136k freed Executing init=/sbin/init Adding Swap: 297160k swap-space (priority -1) EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal Real Time Clock Driver v1.10f Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 409M agpgart: Detected SiS 650 chipset agpgart: AGP aperture is 64M @ 0xe0000000 ACPI: Battery Slot [BAT0] (battery absent) ACPI: AC Adapter [AC] (on-line) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI: Processor [CPU0] (supports C1) ACPI: Processor [CPU1] (supports C1) b44.c:v0.92 (Nov 4, 2003) divert: allocating divert_blk for eth0 eth0: Broadcom 4400 10/100BaseT Ethernet 00:0c:6e:c9:47:5c kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal EXT3-fs: mounted filesystem with ordered data mode. MSDOS FS: IO charset cp1251 MSDOS FS: Using codepage 866 usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-ohci.c: USB OHCI at membase 0xdebbe000, IRQ 20 usb-ohci.c: usb-00:03.0, Silicon Integrated Systems [SiS] USB 1.0 Controller usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb-ohci.c: USB OHCI at membase 0xdebc0000, IRQ 21 usb-ohci.c: usb-00:03.1, Silicon Integrated Systems [SiS] USB 1.0 Controller (#2) usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-ohci.c: USB OHCI at membase 0xdebc2000, IRQ 22 usb-ohci.c: usb-00:03.2, Silicon Integrated Systems [SiS] USB 1.0 Controller (#3) usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected ehci_hcd 00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller ehci_hcd 00:03.3: irq 23, pci mem debca000 usb.c: new USB bus registered, assigned bus number 4 PCI: cache line size of 128 is not supported by device 00:03.3 ehci_hcd 00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4 hub.c: USB hub found hub.c: 6 ports detected usb.c: USB disconnect on device 00:03.0-0 address 1 usb.c: USB bus 1 deregistered usb.c: USB disconnect on device 00:03.1-0 address 1 usb.c: USB bus 2 deregistered usb.c: USB disconnect on device 00:03.2-0 address 1 usb.c: USB bus 3 deregistered ehci_hcd 00:03.3: remove state 3 usb.c: USB disconnect on device 00:03.3-0 address 1 usb.c: USB bus 4 deregistered usb.c: deregistering driver usbdevfs usb.c: deregistering driver hub inserting floppy driver for 2.4.26-std-up-alt6 APIC error on CPU0: 00(40) parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found floppy0: no floppy controllers found inserting floppy driver for 2.4.26-std-up-alt6 floppy0: no floppy controllers found inserting floppy driver for 2.4.26-std-up-alt6 floppy0: no floppy controllers found inserting floppy driver for 2.4.26-std-up-alt6 floppy0: no floppy controllers found inserting floppy driver for 2.4.26-std-up-alt6 floppy0: no floppy controllers found inserting floppy driver for 2.4.26-std-up-alt6 floppy0: no floppy controllers found Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] Yenta ISA IRQ mask 0x0080, PCI irq 16 Socket status: 30000006 divert: not allocating divert_blk for non-ethernet device irlan0 BlueZ Core ver 2.3 Copyright (C) 2000,2001 Qualcomm Inc Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com> BlueZ L2CAP ver 2.3 Copyright (C) 2000,2001 Qualcomm Inc Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com> BlueZ RFCOMM ver 1.1 Copyright (C) 2002 Maxim Krasnyansky <maxk@qualcomm.com> Copyright (C) 2002 Marcel Holtmann <marcel@holtmann.org> Intel 810 + AC97 Audio, version 0.24, 21:57:24 Aug 3 2004 i810: SiS 7012 found at IO 0x9000 and 0x9400, MEM 0x0000 and 0x0000, IRQ 18 i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 ac97_codec: AC97 Audio codec, id: ALG32 (ALC650) i810_audio: AC'97 codec 0, new EID value = 0x05c7 i810_audio: AC'97 codec 0, DAC map configured, total channels = 6 usb.c: registered new driver usbdevfs usb.c: registered new driver hub ehci_hcd 00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller ehci_hcd 00:03.3: irq 23, pci mem dec15000 usb.c: new USB bus registered, assigned bus number 1 PCI: cache line size of 128 is not supported by device 00:03.3 ehci_hcd 00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4 hub.c: USB hub found hub.c: 6 ports detected usb-ohci.c: USB OHCI at membase 0xdec1d000, IRQ 20 usb-ohci.c: usb-00:03.0, Silicon Integrated Systems [SiS] USB 1.0 Controller usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-ohci.c: USB OHCI at membase 0xdec1f000, IRQ 21 usb-ohci.c: usb-00:03.1, Silicon Integrated Systems [SiS] USB 1.0 Controller (#2) usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected usb-ohci.c: USB OHCI at membase 0xdec21000, IRQ 22 usb-ohci.c: usb-00:03.2, Silicon Integrated Systems [SiS] USB 1.0 Controller (#3) usb.c: new USB bus registered, assigned bus number 4 hub.c: USB hub found hub.c: 2 ports detected hub.c: new USB device 00:03.3-4, assigned address 2 usb.c: USB device 2 (vend/prod 0x67b/0x2507) is not claimed by any active driver. hub.c: new USB device 00:03.1-1, assigned address 2 usb.c: USB device 2 (vend/prod 0x46d/0xc016) is not claimed by any active driver. usb.c: registered new driver hiddev usb.c: registered new driver hid input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb3:2.0 hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz> hid-core.c: USB HID support drivers SCSI subsystem driver Revision: 1.00 mice: PS/2 mouse device common for all mice Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage scsi0 : SCSI emulation for USB Mass Storage devices Vendor: SAMSUNG Model: MP0804H Rev: UE10 Type: Direct-Access ANSI SCSI revision: 02 WARNING: USB Mass Storage data integrity not assured USB Mass Storage device found at 2 USB Mass Storage support registered. Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sda: 156368017 512-byte hdwr sectors (80060 MB) sda: sda1 sda2 sda3 inserting floppy driver for 2.4.26-std-up-alt6 floppy0: no floppy controllers found hdc: attached ide-cdrom driver. hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Looking for splash picture.... found (1024x768, 12752 bytes, v2). Splash status on console 0 changed to on Looking for splash picture.... found (1024x768, 12752 bytes, v2). Splash status on console 1 changed to on Looking for splash picture.... found (1024x768, 12752 bytes, v2). Splash status on console 2 changed to on Looking for splash picture.... found (1024x768, 12752 bytes, v2). Splash status on console 3 changed to on Looking for splash picture.... found (1024x768, 12752 bytes, v2). Splash status on console 4 changed to on Looking for splash picture.... found (1024x768, 12752 bytes, v2). Splash status on console 5 changed to on Looking for splash picture.... found (1024x768, 12752 bytes, v2). Splash status on console 6 changed to on Looking for splash picture.... found (1024x768, 12752 bytes, v2). Splash status on console 7 changed to on Looking for splash picture.... found (1024x768, 12752 bytes, v2). Splash status on console 8 changed to on Looking for splash picture.... found (1024x768, 12752 bytes, v2). Splash status on console 9 changed to on Looking for splash picture.... found (1024x768, 12752 bytes, v2). Splash status on console 10 changed to on Looking for splash picture.... found (1024x768, 12752 bytes, v2). Splash status on console 11 changed to on [root@localhost root]# ----- -- С уважением, georginus mailto:georginus@galaktika.by ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Comm] Re: bcm44x + ALM2.4 2005-01-11 9:47 ` Re[2]: " georginus @ 2005-01-11 9:58 ` Valery V. Inozemtsev 2005-01-11 12:07 ` Re[2]: " georginus 0 siblings, 1 reply; 16+ messages in thread From: Valery V. Inozemtsev @ 2005-01-11 9:58 UTC (permalink / raw) To: community [-- Attachment #1: Type: text/plain, Size: 591 bytes --] В сообщении от 11 Январь 2005 12:47 georginus написал(a): > >> > /etc/modules.conf > >> > > >> > alias eth0 b44 > >> > >> прописано > > > > depmod -a > > делал > > вот вывод dmesg: > > -- > [root@localhost root]# dmesg > <skip> > ACPI: Processor [CPU1] (supports C1) > b44.c:v0.92 (Nov 4, 2003) > divert: allocating divert_blk for eth0 > eth0: Broadcom 4400 10/100BaseT Ethernet 00:0c:6e:c9:47:5c ну с драйвером все нормально. /etc/sysconfig/network-scripts/ifcfg-eth0 есть? <skip> -- Valery V. Inozemtsev Powered by ALT Linux Sisyphus (20050104) ftp://ftp.altlinux.ru/pub/people/shrek/ [-- Attachment #2: Type: application/pgp-signature, Size: 190 bytes --] ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re[2]: [Comm] Re: bcm44x + ALM2.4 2005-01-11 9:58 ` Valery V. Inozemtsev @ 2005-01-11 12:07 ` georginus 2005-01-11 12:12 ` Genix 0 siblings, 1 reply; 16+ messages in thread From: georginus @ 2005-01-11 12:07 UTC (permalink / raw) To: community Здравствуйте, Valery. Вы писали 11 января 2005 г., 11:58:36: > В сообщении от 11 Январь 2005 12:47 georginus написал(a): >> >> > /etc/modules.conf >> >> > >> >> > alias eth0 b44 >> >> >> >> прописано >> > >> > depmod -a >> >> делал >> >> вот вывод dmesg: >> >> -- >> [root@localhost root]# dmesg >> > <skip> >> ACPI: Processor [CPU1] (supports C1) >> b44.c:v0.92 (Nov 4, 2003) >> divert: allocating divert_blk for eth0 >> eth0: Broadcom 4400 10/100BaseT Ethernet 00:0c:6e:c9:47:5c > ну с драйвером все нормально. > /etc/sysconfig/network-scripts/ifcfg-eth0 есть? нет, файла с таким именем нет. есть ifcfg-lo и ifcfg-irlan0 :) -- С уважением, georginus mailto:georginus@galaktika.by ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Comm] Re: bcm44x + ALM2.4 2005-01-11 12:07 ` Re[2]: " georginus @ 2005-01-11 12:12 ` Genix 2005-01-11 13:02 ` Re[2]: " georginus 0 siblings, 1 reply; 16+ messages in thread From: Genix @ 2005-01-11 12:12 UTC (permalink / raw) To: community georginus пишет: >>ну с драйвером все нормально. >>/etc/sysconfig/network-scripts/ifcfg-eth0 есть? >> >> > >нет, файла с таким именем нет. есть ifcfg-lo и >ifcfg-irlan0 :) > > ну так создайте его, и пропишите туда что-то типа DEVICE=eth0 BOOTPROTO=static IPADDR=_your.ip_ NETMASK=255.255.255.0 GATEWAY=_gw_ ONBOOT=yes -- У каждого в башке свои тараканы... ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re[2]: [Comm] Re: bcm44x + ALM2.4 2005-01-11 12:12 ` Genix @ 2005-01-11 13:02 ` georginus 2005-01-11 18:30 ` Michael Shigorin 0 siblings, 1 reply; 16+ messages in thread From: georginus @ 2005-01-11 13:02 UTC (permalink / raw) To: community Создал нечто подобное ifcfg-eth0, все получилось, сеть заработала, только осталось с lisa'ой разобраться... :) Всем спасибо за помощь, вы мне очень помогли! :DRINK: Тема закрыта :) -- С уважением, georginus mailto:georginus@galaktika.by ^ permalink raw reply [flat|nested] 16+ messages in thread
* [Comm] Re: bcm44x + ALM2.4 2005-01-11 13:02 ` Re[2]: " georginus @ 2005-01-11 18:30 ` Michael Shigorin 0 siblings, 0 replies; 16+ messages in thread From: Michael Shigorin @ 2005-01-11 18:30 UTC (permalink / raw) To: community On Tue, Jan 11, 2005 at 03:02:53PM +0200, georginus wrote: > Создал нечто подобное ifcfg-eth0, все получилось, сеть > заработала, только осталось с lisa'ой разобраться... :) А чего с ней разбираться -- пристрелить и всех делов. -- ---- WBR, Michael Shigorin <mike@altlinux.ru> ------ Linux.Kiev http://www.linux.kiev.ua/ ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Comm] Re: bcm44x + ALM2.4 2005-01-11 9:36 ` Re[2]: " georginus 2005-01-11 9:41 ` Valery V. Inozemtsev @ 2005-01-11 9:44 ` Sasha Martsinuk 2005-01-11 9:45 ` Re[2]: " georginus 1 sibling, 1 reply; 16+ messages in thread From: Sasha Martsinuk @ 2005-01-11 9:44 UTC (permalink / raw) To: community georginus wrote: >>>>>>modprobe tg3 >>>>> >>>>>[root@localhost root]# modprobe tg3 >>>>>/lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: init_module: >>>>>No such device Hint: insmod errors can be caused by incorrect module >>>>>parameters, including invalid IO or IRQ parameters. You may find more >>>>>information in syslog or the output from dmesg >>>>>/lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: insmod >>>>>/lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o failed >>>>>/lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: insmod tg3 >>>>>failed [root@localhost root]# >>>> >>>>modprobe b44 >>> >>>это проходит нормально, по lsmod b44 есть, но сеть все равно не >>>работает. может нужно какие-нибудь конфиги ручками поправить? >>/etc/modules.conf >>alias eth0 b44 > прописано А теперь надо настроить eth0 в /etc/sysconfig/network-scripts/ifcfg-eth0 или /etc/net -- WBR, Sasha aka mr.Scamp mailto:sasha@sasha.rv.ua ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re[2]: [Comm] Re: bcm44x + ALM2.4 2005-01-11 9:44 ` Sasha Martsinuk @ 2005-01-11 9:45 ` georginus 0 siblings, 0 replies; 16+ messages in thread From: georginus @ 2005-01-11 9:45 UTC (permalink / raw) To: community Здравствуйте, Sasha. Вы писали 11 января 2005 г., 11:44:59: > georginus wrote: >>>>>>>modprobe tg3 >>>>>> >>>>>>[root@localhost root]# modprobe tg3 >>>>>>/lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: init_module: >>>>>>No such device Hint: insmod errors can be caused by incorrect module >>>>>>parameters, including invalid IO or IRQ parameters. You may find more >>>>>>information in syslog or the output from dmesg >>>>>>/lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: insmod >>>>>>/lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o failed >>>>>>/lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: insmod tg3 >>>>>>failed [root@localhost root]# >>>>> >>>>>modprobe b44 >>>> >>>>это проходит нормально, по lsmod b44 есть, но сеть все равно не >>>>работает. может нужно какие-нибудь конфиги ручками поправить? >>>/etc/modules.conf >>>alias eth0 b44 >> прописано > А теперь надо настроить eth0 в > /etc/sysconfig/network-scripts/ifcfg-eth0 > или /etc/net сам смогу догадаться или без помощи никак? -- С уважением, georginus mailto:georginus@galaktika.by ^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2005-01-11 18:30 UTC | newest] Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2005-01-10 15:39 [Comm] bcm44x + ALM2.4 georginus 2005-01-10 19:06 ` [Comm] " Michael Shigorin 2005-01-11 7:40 ` georginus 2005-01-11 9:25 ` Valery V. Inozemtsev 2005-01-11 9:32 ` Re[2]: " georginus 2005-01-11 9:35 ` Valery V. Inozemtsev 2005-01-11 9:36 ` Re[2]: " georginus 2005-01-11 9:41 ` Valery V. Inozemtsev 2005-01-11 9:47 ` Re[2]: " georginus 2005-01-11 9:58 ` Valery V. Inozemtsev 2005-01-11 12:07 ` Re[2]: " georginus 2005-01-11 12:12 ` Genix 2005-01-11 13:02 ` Re[2]: " georginus 2005-01-11 18:30 ` Michael Shigorin 2005-01-11 9:44 ` Sasha Martsinuk 2005-01-11 9:45 ` Re[2]: " georginus
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git