From: "Коржевин Дмитрий Константинович" <knc@voliacable.com> To: ALT Linux Community <community@lists.altlinux.org> Subject: [Comm] Не могу настроить драйвер видеокарты.. Date: Sun, 13 Aug 2006 18:49:58 +0300 Message-ID: <1155484198.2808.0.camel@ip.85.202.242.29.dyn.sub-11.broadband.voliacable.com> (raw) [-- Attachment #1: Type: text/plain, Size: 1181 bytes --] Помогите пожалуйста настроить драйвер видеокарты ATI Radeon 7000. После переустановки никак не получается загрузится в графический режим с родным драйвером. Если выбираю: Generic VESA compatible, то могу зайти в систему в графическом режиме. Если выбираю родной драйвер ATI Radoen 7000, то при загрузке монитор уходит в спящий режим и не выходит из него. К слову - при установке системы я не нашел драйвера к монитору. Может быть вы поможете найти решение этой проблемы? Видеокарта: ATI Radeon 7000 Монитор: Samsung Sync Master 551s (15-ть дюймов) Система: ASP Linux 11 Express Вкладываю логи и конфиги X11 при которых не загружается система. Быть может, кто-то уже сталкивался с этой проблемой.. [-- Attachment #2: xorg.conf --] [-- Type: text/plain, Size: 2294 bytes --] # Xorg configuration created by system-config-display Section "ServerLayout" Identifier "single head configuration" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "unix/:7100" EndSection Section "Module" Load "GLcore" Load "dbe" Load "extmod" Load "fbdevhw" Load "glx" # Load "pex5" Load "record" # Load "xie" Load "v4l" Load "type1" Load "dri" EndSection Section "ServerFlags" Option "allowmouseopenfail" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "Protocol" "Standard" Option "XkbModel" "pc104" Option "XkbLayout" "us,ru(winkeys)" Option "XkbOptions" "grp:ctrl_shift_toggle,grp_led:scroll" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "on" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" EndSection Section "Monitor" #800x600 @ 85.0 Hz, 55.8 kHz hsync #Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync #640x480 @ 85.0 Hz, 43.3 kHz hsync #Modeline "640x480" 36 640 696 752 832 480 481 484 509 -HSync -VSync Identifier "Monitor" VendorName "SAM" ModelName "Samsung SyncMaster 550(M)s" HorizSync 30.0 - 61.0 VertRefresh 50.0 - 120.0 EndSection Section "Device" # Option "NoAccel" Identifier "Generic VESA compatible" Driver "radeon" BoardName "ATI Radeon 7000" EndSection Section "Screen" Identifier "Screen0" Device "Generic VESA compatible" Monitor "Monitor" DefaultDepth 24 SubSection "Display" Depth 4 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 32 Modes "800x600" "640x480" EndSubSection EndSection Section "DRI" Mode 0666 EndSection [-- Attachment #3: xorg.conf.backup --] [-- Type: text/plain, Size: 2854 bytes --] # buildxconf *** delete this line to prevent buildxconf from modifying this file # # XF86Config auto-generated by buildxconf # # Copyright (c) 1999, Corel Corporation # Robin Burgener, robinb@corel.com # # See 'man XF86Config' for info on the format of this file Section "ServerLayout" Identifier "XFree86 Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Module" Load "GLcore" Load "dbe" Load "dri" Load "extmod" Load "fbdevhw" Load "glx" # Load "pex5" Load "record" # Load "xie" Load "v4l" Load "type1" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "Protocol" "Standard" Option "XkbModel" "pc104" Option "XkbLayout" "us,ru(winkeys)" Option "XkbOptions" "grp:ctrl_shift_toggle,grp_led:scroll" EndSection Section "InputDevice" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "on" Identifier "Mouse0" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "unix/:7100" EndSection Section "ServerFlags" AllowMouseOpenFail EndSection Section "Monitor" Identifier "Monitor" VendorName "SAM" ModelName "Samsung SyncMaster 550(M)s" HorizSync 30-61 VertRefresh 50-120 #800x600 @ 85.0 Hz, 55.8 kHz hsync #Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync #640x480 @ 85.0 Hz, 43.3 kHz hsync #Modeline "640x480" 36 640 696 752 832 480 481 484 509 -HSync -VSync EndSection Section "Monitor" #!Description "Super VGA 1024x768 @ 60Hz" Identifier "Super VGA" ModelName "Super VGA" HorizSync 31.5-48.5 VertRefresh 50-90 # 1024x768 @ 60 Hz, 48.4 kHz hsync Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync # 800x600 @ 60 Hz, 37.8 kHz hsync Modeline "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vsync # 640x400 @ 70 Hz, 31.5 kHz hsync Modeline "640x480" 25.175 640 664 760 800 480 491 493 525 EndSection Section "Device" Driver "vesa" Identifier "Generic VESA compatible" BoardName "Generic VESA compatible" # Option "NoAccel" EndSection Section "Screen" Identifier "Screen0" Device "Generic VESA compatible" Monitor "Monitor" DefaultColorDepth 24 SubSection "Display" Depth 4 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 32 Modes "800x600" "640x480" EndSubSection EndSection Section "DRI" Mode 0666 EndSection [-- Attachment #4: xorg.conf --] [-- Type: text/plain, Size: 2828 bytes --] # Xorg configuration created by system-config-display Section "ServerLayout" Identifier "single head configuration" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" # RgbPath is the location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. # Multiple FontPath entries are allowed (they are concatenated together) # By default, Red Hat 6.0 and later now use a font server independent of # the X server to render fonts. RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "unix/:7100" EndSection Section "Module" Load "dbe" Load "extmod" Load "fbdevhw" Load "glx" Load "record" Load "freetype" Load "type1" Load "dri" EndSection Section "InputDevice" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3" # To disable the XKEYBOARD extension, uncomment XkbDisable. # Option "XkbDisable" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" # Or if you just want both to be control, use: # Option "XkbOptions" "ctrl:nocaps" # Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "yes" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "SyncMaster" DisplaySize 280 210 HorizSync 30.0 - 55.0 VertRefresh 50.0 - 120.0 Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "radeon" VendorName "Videocard vendor" BoardName "ATI Radeon 7000" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 16 Modes "800x600" "640x480" EndSubSection SubSection "Display" Viewport 0 0 Depth 24 Modes "800x600" "640x480" EndSubSection EndSection Section "DRI" Group 0 Mode 0666 EndSection [-- Attachment #5: xorg.conf.backup --] [-- Type: text/plain, Size: 2259 bytes --] # Xorg configuration created by system-config-display Section "ServerLayout" Identifier "single head configuration" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "unix/:7100" EndSection Section "Module" Load "GLcore" Load "dbe" Load "extmod" Load "fbdevhw" Load "glx" # Load "pex5" Load "record" # Load "xie" Load "v4l" Load "type1" Load "dri" EndSection Section "ServerFlags" Option "allowmouseopenfail" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "Protocol" "Standard" Option "XkbModel" "pc104" Option "XkbLayout" "us,ru(winkeys)" Option "XkbOptions" "grp:ctrl_shift_toggle,grp_led:scroll" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "on" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" EndSection Section "Monitor" #800x600 @ 85.0 Hz, 55.8 kHz hsync #Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync #640x480 @ 85.0 Hz, 43.3 kHz hsync #Modeline "640x480" 36 640 696 752 832 480 481 484 509 -HSync -VSync Identifier "Monitor" VendorName "SAM" ModelName "Samsung SyncMaster 550(M)s" HorizSync 30.0 - 61.0 VertRefresh 50.0 - 120.0 EndSection Section "Device" Identifier "ATI Radeon 7000" Driver "radeon" BoardName "ATI Radeon 7000" EndSection Section "Screen" Identifier "Screen0" Device "Generic VESA compatible" Monitor "Monitor" DefaultDepth 24 SubSection "Display" Depth 4 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 32 Modes "800x600" "640x480" EndSubSection EndSection Section "DRI" Mode 0666 EndSection
next reply other threads:[~2006-08-13 15:49 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2006-08-13 15:49 Коржевин Дмитрий Константинович [this message] 2006-08-13 17:54 ` Olvin 2006-08-13 18:34 ` Алексей Синицын 2006-08-14 6:53 ` Michael Shigorin
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1155484198.2808.0.camel@ip.85.202.242.29.dyn.sub-11.broadband.voliacable.com \ --to=knc@voliacable.com \ --cc=community@lists.altlinux.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git