ALT Linux Community general discussions
 help / color / mirror / Atom feed
* Re: [Comm] Увеличение скорости винта
@ 2004-07-05  3:13 Андрей
  2004-07-06 14:59 ` Andrey Rahmatullin
  2004-07-08  8:12 ` Re[2]: " php-coder
  0 siblings, 2 replies; 3+ messages in thread
From: Андрей @ 2004-07-05  3:13 UTC (permalink / raw)
  To: community

Здравствуйте, community.
> Давайте просто сравним. У меня ST3120022A, ATA DISK drive,
> 120034MB) w/2048KiB Cache, UDMA(100) и:
> # hdparm -t /dev/hda
> /dev/hda:
> Timing buffered disk reads:  140 MB in  3.02 seconds =
> 46.36MB/sec

Давайте, сравним, у меня вот так:
/dev/hda:
 Timing buffered disk reads:  64 MB in  1.16 seconds = 55.17 MB/sec
Это хорошо или плохо? :)

> С тонкими настройками я сюда и не лезу. Зачем? (И процессор не
> разгоняю :-).
Я ПОКА тоже... :))
Вот для справки hdparm -i /dev/hda:

/dev/hda:

 Model=ST380011A, FwRev=3.06, SerialNo=5JV9VBFS
 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
 RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
 BuffType=unknown, BuffSize=2048kB, MaxMultSect=16, MultSect=off
 CurCHS=65535/1/63, CurSects=4128705, LBA=yes, LBAsects=156301488
 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes:  pio0 pio1 pio2 pio3 pio4 
 DMA modes:  mdma0 mdma1 mdma2 
 UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 
 AdvancedPM=no WriteCache=enabled
 Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2:  1 2 3 4 5 6
-- 
С уважением,
 Андрей                          mailto:alt@pochtamt.ru



^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2004-07-08  8:12 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-07-05  3:13 [Comm] Увеличение скорости винта Андрей
2004-07-06 14:59 ` Andrey Rahmatullin
2004-07-08  8:12 ` Re[2]: " php-coder

ALT Linux Community general discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
		mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
	public-inbox-index community

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.community


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git