* [Comm] Помогите настроить подключение к VPN!
@ 2005-01-11 16:51 Alex A T
2005-01-12 6:56 ` Alex A T
0 siblings, 1 reply; 3+ messages in thread
From: Alex A T @ 2005-01-11 16:51 UTC (permalink / raw)
To: community
Настраиваю pptp-config и получаю такую фигню:
# service pptptunnel start
Starting "Artx" PPTP tunnel service: Serial connection establi
shed.
using channel 1
Using interface ppp0
Connect: ppp0 <--> /dev/pts/2
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x43d18594> <pc
omp> <accomp>]
rcvd [LCP ConfReq id=0x1 <accomp> <asyncmap 0x0> <mru 1500> <m
agic 0x80f22e63> <auth chap MD5>]
No auth is possible
sent [LCP ConfRej id=0x1 <auth chap MD5>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x43d18594> <pc
omp> <accomp>]
rcvd [LCP ConfReq id=0x2 <accomp> <asyncmap 0x0> <mru 1500> <m
agic 0x80f22e63> <auth chap MD5>]
No auth is possible
sent [LCP ConfRej id=0x2 <auth chap MD5>]
rcvd [LCP ConfReq id=0x3 <accomp> <asyncmap 0x0> <mru 1500> <m
agic 0x80f22e63> <auth chap MD5>]
No auth is possible
sent [LCP ConfRej id=0x3 <auth chap MD5>]
rcvd [LCP ConfReq id=0x4 <accomp> <asyncmap 0x0> <mru 1500> <m
agic 0x80f22e63> <auth chap MD5>]
No auth is possible
sent [LCP ConfRej id=0x4 <auth chap MD5>]
rcvd [LCP ConfReq id=0x5 <accomp> <asyncmap 0x0> <mru 1500> <m
agic 0x80f22e63> <auth chap MD5>]
No auth is possible
sent [LCP ConfRej id=0x5 <auth chap MD5>]
rcvd [LCP ConfReq id=0x6 <accomp> <asyncmap 0x0> <mru 1500> <m
agic 0x80f22e63> <auth chap MD5>]
No auth is possible
sent [LCP ConfRej id=0x6 <auth chap MD5>]
rcvd [LCP ConfReq id=0x7 <accomp> <asyncmap 0x0> <mru 1500> <m
agic 0x80f22e63> <auth chap MD5>]
No auth is possible
sent [LCP ConfRej id=0x7 <auth chap MD5>]
rcvd [LCP ConfReq id=0x8 <accomp> <asyncmap 0x0> <mru 1500> <m
agic 0x80f22e63> <auth chap MD5>]
No auth is possible
sent [LCP ConfRej id=0x8 <auth chap MD5>]
rcvd [LCP ConfReq id=0x9 <accomp> <asyncmap 0x0> <mru 1500> <m
agic 0x80f22e63> <auth chap MD5>]
No auth is possible
sent [LCP ConfRej id=0x9 <auth chap MD5>]
rcvd [LCP ConfReq id=0xa <accomp> <asyncmap 0x0> <mru 1500> <m
agic 0x80f22e63> <auth chap MD5>]
No auth is possible
sent [LCP ConfRej id=0xa <auth chap MD5>]
rcvd [LCP ConfReq id=0xb <accomp> <asyncmap 0x0> <mru 1500> <m
agic 0x80f22e63> <auth chap MD5>]
No auth is possible
sent [LCP ConfRej id=0xb <auth chap MD5>]
rcvd [LCP ConfReq id=0xc <accomp> <asyncmap 0x0> <mru 1500> <m
agic 0x80f22e63> <auth chap MD5>]
No auth is possible
sent [LCP ConfRej id=0xc <auth chap MD5>]
rcvd [LCP ConfReq id=0xd <accomp> <asyncmap 0x0> <mru 1500> <m
agic 0x80f22e63> <auth chap MD5>]
No auth is possible
sent [LCP ConfRej id=0xd <auth chap MD5>]
rcvd [LCP ConfReq id=0xe <accomp> <asyncmap 0x0> <mru 1500> <m
agic 0x80f22e63> <auth chap MD5>]
No auth is possible
sent [LCP ConfRej id=0xe <auth chap MD5>]
rcvd [LCP ConfReq id=0xf <accomp> <asyncmap 0x0> <mru 1500> <m
agic 0x80f22e63> <auth chap MD5>]
No auth is possible
sent [LCP ConfRej id=0xf <auth chap MD5>]
rcvd [LCP ConfReq id=0x10 <accomp> <asyncmap 0x0> <mru 1500> <
magic 0x80f22e63> <auth chap MD5>]
No auth is possible
sent [LCP ConfRej id=0x10 <auth chap MD5>]
rcvd [LCP TermReq id=0x11]
sent [LCP TermAck id=0x11]
Script /usr/sbin/pptp 80.73.164.146 --nolaunchpppd finished (p
id 2176), status = 0x0
Modem hangup
Connection terminated.
[FAILED]
Как это победить?
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Comm] Помогите настроить подключение к VPN!
2005-01-11 16:51 [Comm] Помогите настроить подключение к VPN! Alex A T
@ 2005-01-12 6:56 ` Alex A T
2005-01-12 12:08 ` Вячеслав Диконов
0 siblings, 1 reply; 3+ messages in thread
From: Alex A T @ 2005-01-12 6:56 UTC (permalink / raw)
To: community
Ни кто не знает???
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Comm] Помогите настроить подключение к VPN!
2005-01-12 6:56 ` Alex A T
@ 2005-01-12 12:08 ` Вячеслав Диконов
0 siblings, 0 replies; 3+ messages in thread
From: Вячеслав Диконов @ 2005-01-12 12:08 UTC (permalink / raw)
To: community
В Срд, 12/01/2005 в 09:56 +0300, Alex A T пишет:
> Ни кто не знает???
никто не понял вопроса.
1) в /etc/ppp/chap-secrets вписываем имя, пароль и любое "имя сервера"
см. этот файл.
2) pptp xxx.xxx.xxx.xxx -name XXX -remotename "имя сервера"
В /etc/ppp/optoions обычно написано
lock
noauth
defaultroute
Должен провайдер объяснять такие вещи.
--
Вячеслав Диконов <linuxbox@degunino.net>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2005-01-12 12:08 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-01-11 16:51 [Comm] Помогите настроить подключение к VPN! Alex A T
2005-01-12 6:56 ` Alex A T
2005-01-12 12:08 ` Вячеслав Диконов
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git