* Re: [Comm] Re: ATI Rage 128 pro
2003-04-29 19:30 ` Konstantin Lepikhov
@ 2003-04-29 20:26 ` Андрей Новосёлов
0 siblings, 0 replies; 3+ messages in thread
From: Андрей Новосёлов @ 2003-04-29 20:26 UTC (permalink / raw)
To: ALTLinux
[-- Attachment #1: Type: text/plain, Size: 824 bytes --]
В Втр, 29.04.2003, в 22:30, Konstantin Lepikhov написал:
> Hi Андрей!
>
> Tuesday 29, at 09:26:11 AM you wrote:
>
> > В Пнд, 28.04.2003, в 22:40, Konstantin Lepikhov написал:
> >
> > > Проверьте, что в XF86Config-4 есть такие строки
> > >
> > > Section "dri"
> > > Mode 0666
> > > EndSection
> > Соответствует.
> > >
> > > и что /dev/dri/ имеет права 755 и /dev/dri/card0 - 666
> > /dev/dri/ 40755 и /dev/dri/card0 20666
> OK с этим все в порядке. Тогда высылайте свой XF86Config-4. На работе
> такая же карта прекрасно работает. Будем testcase создавать.
Не знаю, имеет ли это отношение, но в 12 консоли после сообщения, что не
может найти char-major-226, следующие сообщения о загрузке модуля drm c
agp и r128. Т.е. сначала не находит модулей, которые следом загружаются
?
--
С наилучшими пожеланиями, Андрей.
[-- Attachment #2: XF86Config-4 --]
[-- Type: text/plain, Size: 6397 bytes --]
# File generated by XFdrake.
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#NoTrapSignals
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#DontZap
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#DontZoom
# This allows the server to start up even if the
# mouse device can't be opened/initialised.
AllowMouseOpenFail
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Keyboard section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "250 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "ru"
Option "XkbVariant" "winkeys"
Option "XkbOptions" "grp:ctrl_shift_toggle"
EndSection
# **********************************************************************
# Pointer section
# **********************************************************************
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons"
Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
Section "Module"
# This loads the DBE extension module.
Load "dbe"
Load "glx"
Load "dri"
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
#Option "omit xfree86-dga"
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
EndSection
Section "DRI"
Mode 0666
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Iiyama|Iiyama MF-8617E/T, VisionMaster"
VendorName "Iiyama"
ModelName "Unknown"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-70
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-160
# This is a set of extended mode timings typically used for laptop,
# TV fullscreen mode or DVD fullscreen output.
# These are available along with standard mode timings.
# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
Section "Device"
Identifier "Generic VGA"
Driver "vga"
EndSection
Section "Device"
Identifier "ATI Rage 128"
VendorName "Unknown"
BoardName "Unknown"
Driver "r128"
# VideoRam 32768
# Clock lines
# Uncomment following option if you see a big white block
# instead of the cursor!
# Option "sw_cursor"
Option "AGPMode" "1"
Option "UseCCEFor2D" "false"
Option "DPMS" "on"
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
Section "Screen"
Identifier "screen1"
Device "ATI Rage 128"
Monitor "Iiyama|Iiyama MF-8617E/T, VisionMaster"
DefaultColorDepth 16
Subsection "Display"
Depth 8
Modes "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 15
Modes "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "layout1"
Screen "screen1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
^ permalink raw reply [flat|nested] 3+ messages in thread