From: "Andrey Liakhovets" <lyakhovetz@roverbook.com> To: <community@altlinux.ru> Subject: [Comm] Q: Junior kernel 2.4.18-alt7 configuration Date: Tue, 22 Oct 2002 23:17:06 +0400 Message-ID: <040901c279ff$b96f5da0$9601a8c0@internal.dvm.msk.ru> (raw) Здравствуйте. Извините за forwarding, но не мог бы кто-нибудь ответить на вопрос Марвина (см. ниже полностью): |Could some advanced Mandrake User get kernel configuration info on |"mandrake ALT Linux Junior2.4.18-alt7junior-up" |... |> > But there should be a file /boot/config-SomeVersion , |... |> > Do : |> > # cp /boot/config-SomeVersion /root/ |> > # gzip config-SomeVersion |> > Then send me config-SomeVersion.gz Наверное, ответ можно послать мне лично, с уведомлением в рассылку (чтобы я не получил очень много ответов), или -- прямо в рассылку linmodems. Андрей Ляховец ----- Original Message ----- From: "Marvin Stodolsky" <stodolsk@rcn.com> To: "Чирский Ження" <coolwriter@tut.by>; "LinModems" <discuss@linmodems.org> Sent: Sunday, October 20, 2002 9:12 PM Subject: Advanced Mandrake users Re: Lucent modem, mandrake ALT Linux Junior2.4.18-alt7junior-up Could some advanced Mandrake User get kernel configuration info on "mandrake ALT Linux Junior2.4.18-alt7junior-up" so that a drivers can be assembled for Чирский Ження MarvS ====================== >"Чирский Ження" wrote: > > Idon't hafe file /boot/config-SomeVersion; > The query: ls /lib/modules returned 2.4.18-alt7junior-up > > On Sat, 19 Oct 2002 16:46:48 -0400 > Marvin Stodolsky <stodolsk@rcn.com> wrote: > > coolwriter, > > > > There are two problem areas. > > The worst one is: > > ----------------- > > The 11c1:0442 modems have an electro-optical coupling > > which in some hardware is not adequately supported by > > these drivers. > > ----------------- > > that we of no case for which the modem drivers have > > supported this > > modem. > > > > The secondary problem is that your "mandrake ALT Linux > > Junior" is so > > different from regular Mandrake installations, that many > > useful > > diagnostics were not returned by ./build_module. > > > > But there should be a file /boot/config-SomeVersion , > > which starts > > something like: > > =========== > > # > > # Automatically generated make config: don't edit > > # > > CONFIG_X86=y > > CONFIG_ISA=y > > # CONFIG_SBUS is not set > > CONFIG_UID16=y > > > > # > > # Code maturity level options > > # > > CONFIG_EXPERIMENTAL=y > > > > # > > # Loadable module support > > # > > CONFIG_MODULES=y > > CONFIG_MODVERSIONS=y > > CONFIG_KMOD=y > > > > # > > # Processor type and features > > =========== > > > > Do : > > # cp /boot/config-SomeVersion /root/ > > # gzip config-SomeVersion > > Then send me config-SomeVersion.gz > > > > and I'll build drivers for you so that a test can be run. > > Also what is returned by the query > > # ls /lib/modules/ > > > > MarvS > > > > > > > > >"Чирский Ження" wrote: > > > > > > Linux Newbies should check DOCs/Installers and if still > > > necessary > > > http://www.heby.de/ltmodem for already > > available driver > > > installers > > > > > > Together with information included in DOCs/, > > > this report may enable you to solve problems. > > > But if further help is needed, send BLDrecord.txt to > > > discuss@linmodems.org > > > Please use the following in the email Subject Line: > > > Lucent modem, mandrake ALT Linux Junior > > > 2.4.18-alt7junior-up > > > DISTRO=mandrake-release > > > DISTR=mandrake > > > DVERSION=ALT Linux Junior > > > ACTION=./build_module > > > WHOAMI=root > > > Sat Oct 19 11:31:06 EEST 2002 > > > Linux localhost.localdomain 2.4.18-alt7junior-up #1 Wed > > Jun > > > 5 23:27:03 MSD 2002 i686 unknown > > > > > > BN=build_module > > > LSPCI=/usr/bin/lspci > > > TMPM=tmpfile > > > > > > By the Class 07nn: criteria, detected system PCI modem > > > devices are: > > > > > > device Class VendorID:DeviceID == ModemID > > > > > > ---------------------------------------------------------------- > > > 02:09.0 Class 0780: 11c1:0442 (rev 01) > > > 02:09.0 Communication controller: Lucent > > Microelectronics > > > 56k WinModem (rev 01) > > > VENDOR 0x11c1 DEVICE 0x0442 > > > ID are within the serviced ranges: > > > > > > IDs of supported Lucent DSP PCI modems have ranges: > > > Vendor vendor_id device_id range > > > ----------------------------------------------- > > > LUCENT 0x11c1 0x0440-0x045c > > > XIRCOM 0x115d 0x0000-0x000F > > > XIRCOM 0x115d 0x0440-0x045c > > > XIRCOM 0x115d 0x0010-0x03ff > > > > > > VENDOR=LUCENT with MODEM_ID=11c1:0442 > > > ---------------------------------------------- > > > MODEL_DATA= 0x0442 -- Mars 2 - data/fax/tam only > > > 02:09.0 Communication controller: Lucent > > Microelectronics > > > 56k WinModem (rev 01) > > > 02:09.0 Class 0780: 11c1:0442 (rev 01) > > > Subsystem: 11c1:0440 > > > Control: I/O+ Mem+ BusMaster+ SpecCycle- > > MemWINV- > > > VGASnoop- ParErr- Stepping- SERR- FastB2B- > > > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- > > DEVSEL=medium > > > >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > > Latency: 0 (63000ns min, 3500ns max) > > > Interrupt: pin A routed to IRQ 5 > > > Region 0: Memory at e6000000 (32-bit, > > non-prefetchable) > > > [size=256] > > > Region 1: I/O ports at c000 [size=8] > > > Region 2: I/O ports at c400 [size=256] > > > Capabilities: [f8] Power Management version 2 > > > Flags: PMEClk- DSI+ D1- D2+ > > AuxCurrent=0mA > > > PME(D0-,D1-,D2+,D3hot+,D3cold+) > > > Status: D0 PME-Enable- DSel=0 DScale=0 > > PME- > > > > > > ---------------------------------------------- > > > The 11c1:0442 modems have an electro-optical coupling > > > which in some hardware is not adequately supported by > > > these drivers. > > > There will likely be a failure of the drivers to > > recognize > > > the modem. > > > Browse within DOCs/Insert-param4.txt > > > > > > Get Lucent/Agere information at: > > > > > > http://www.agere.com/support/client/modem_drivers.html > > > INQUIRE=2.4.18_alt7junior > > > Compiling appears necessary, as a candidate installer > > is > > > not evident. > > > BASE=source > > > # ===SETTINGS=== > > > LT_SERIAL_MODULE="lt_serial" > > > LT_PROPRIETARY_MODULE="lt_modem" > > > DOCS="1ST-READ CHANGELOG UPDATES-BUGS DOCs utils" > > > LT_VERSION="8.22a5" > > > > > > Read in DOCs/ ForNewbies, Compile-Properly.txt and > > > Flavor.txt > > > > > > #===== ltinst2 section ===== > > > > > > LT_MODEM= > > > LT_SERIAL= > > > > > > DEPMOD_LT_NEW=passed > > > > > > The drivers can be removed from the modules search PATH > > > with: ./ltuninst2 > > > > > > > > > ------------------------------------------------------------------------ > > > Name: BLDrecord.txt > > > BLDrecord.txt Type: Plain Text (text/plain) > > > Encoding: base64 > > > >
next reply other threads:[~2002-10-22 19:17 UTC|newest] Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top 2002-10-22 19:17 Andrey Liakhovets [this message] 2002-10-22 19:40 ` Maksim Otstavnov
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to='040901c279ff$b96f5da0$9601a8c0@internal.dvm.msk.ru' \ --to=lyakhovetz@roverbook.com \ --cc=community@altlinux.ru \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git