ALT Linux Community general discussions
 help / color / mirror / Atom feed
* [Comm] Ввопрос про nut
@ 2005-04-08 14:30 Овечкин Влад
  2005-04-11  4:19 ` Mike Lykov
  0 siblings, 1 reply; 2+ messages in thread
From: Овечкин Влад @ 2005-04-08 14:30 UTC (permalink / raw)
  To: community

Добрый день всем! Имеется роутер на ALTLinux Master 2.4 и UPS -  APC
Smart-UPS SC 620VA 230V. UPS  с роутером соединён через COM-порт.
Через apt-cache нашёл всё, что связано с nut:
nut - Network UPS Tools
nut-cgi - CGI utilities for the Network UPS Tools
nut-devel - Header files and C programming manuals for nut
nut-driver - The UPS drivers
nut-driver-snmp - Multi-MIB Driver for SNMP UPS equipment
nut-driver-usb - Multi-HID Driver for USB/HID UPS equipment
nut-server - The UPS information server
Полез узнавать по Nut. Выяснил следующее: nut - многоплатформенная система
для управления источниками бесперебойного питания от различных
производителей. Состоит из трех компонент - драйверов (в моём случае для
соединения через COM-порт потребуется nut-driver), сервера контроля (это
nut-server) и клиентского ПО для слежения за состоянием USP (то есть это, я
так понимаю, пакеты nut и nut-cgi соответственно).
В связи с этим у меня 2 вопроса:
1) правильно ли я мыслю в принципе
2) можно ли запустить на роутере один nut-сервер, без клиентского ПО, чтоб
он сам следил за UPS`ом. Я просто полагаю, что это клиентское ПО для он-лайн
слежения человеком за UPS`ом? Без этого ведь можно обойтись???
С уважением,
Овечкин Влад.



^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2005-04-11  4:19 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-04-08 14:30 [Comm] Ввопрос про nut Овечкин Влад
2005-04-11  4:19 ` Mike Lykov

ALT Linux Community general discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
		mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
	public-inbox-index community

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.community


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git