ALT Linux Community general discussions
 help / color / mirror / Atom feed
* [mdk-re] dev/sequencer
@ 2001-05-16  6:49 Wlad Astap
  2001-05-18  4:49 ` Dmitry Samoyloff
  0 siblings, 1 reply; 2+ messages in thread
From: Wlad Astap @ 2001-05-16  6:49 UTC (permalink / raw)
  To: mandrake-russian

Здравствуйте, господа.

Не могу запустить Heretic для Линукса, -- говорит, что
нет устройства сабж. Как сабж "поднять".
В modules.conf сабж прописан. Разве этого не достаточно?

Владислав Астапкевич
Шушенский РОСЗН




^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [mdk-re] dev/sequencer
  2001-05-16  6:49 [mdk-re] dev/sequencer Wlad Astap
@ 2001-05-18  4:49 ` Dmitry Samoyloff
  0 siblings, 0 replies; 2+ messages in thread
From: Dmitry Samoyloff @ 2001-05-18  4:49 UTC (permalink / raw)
  To: mandrake-russian

16 Май 2001 07:40, Wlad Astap wrote:
> Здравствуйте, господа.
>
> Не могу запустить Heretic для Линукса, -- говорит, что
> нет устройства сабж. Как сабж "поднять".
> В modules.conf сабж прописан. Разве этого не достаточно?

У меня стоял Heretic в 7.0RE, и там он работал только с отключенным звуком, а 
с включенным падал. Музыка играла.

Насчет $subj: у меня есть /dev/sequencer и /dev/sequencer2. Карта с ALS-110, 
вот что в modules.conf:

alias sound-slot-0 sb
options sound dmabuf=1
alias midi opl3
options opl3 io=0x388
options sb io=0x220 irq=5 dma=1 dma16=0 mpu_io=0x330 # mpu_irq=9

Сейчас Heretic под рукой нету, проверить не могу.

С уважением, Дмитрий Самойлов

http://linuxgames.hut.ru (Russian)
http://www.geocities.com/sleepws/



^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2001-05-18  4:49 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-05-16  6:49 [mdk-re] dev/sequencer Wlad Astap
2001-05-18  4:49 ` Dmitry Samoyloff

ALT Linux Community general discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
		mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
	public-inbox-index community

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.community


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git