[Comm] Настройка ATI Radeon в Master 2.2

["Alexandr" <mirus@newmail.ru>]

Следуя инструкциям ATI Radeon HOWTO устаковил пакеты:
fglrx
fglrx_kernel-up
внес в /etc/modules.conf строку alias char-major-10-134 fglrx
в /etc/X11/XF86Config-4 написано вот что:

Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:-1"
EndSection
Section "ServerFlags"
AllowMouseOpenFail
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "250 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "ru"
Option "XkbVariant" "winkeys"
Option "XkbOptions" "grp:ctrl_shift_toggle"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "4 5"
EndSection

Section "Module"
#Load "dbe"
Load "glx"
Load "dri"

SubSection "extmod"
#Option "omit xfree86-dga"
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
EndSection

Section "DRI"
Mode 0666
EndSection

Section "Monitor"
Identifier "monitor1"
VendorName "Unknown"
ModelName "Unknown"

HorizSync 30-96
VertRefresh 50-160

# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
# 1152x864 @ 100 Hz ,89.62 kHz hsync
ModeLine "1152x864" 143.180 1152 1228 1260 1568 864 865 867 915 -hsync
+vsync
EndSection

Section "Monitor"
Identifier "monitor2"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30-96
VertRefresh 50-160
EndSection

Section "Device"
Identifier "Generic VGA"
Driver "vga"
EndSection
Section "Device"
Identifier "ATI Radeon"
VendorName "Unknown"
BoardName "Unknown"
Driver "fglrx"
# Clock lines

# Uncomment following option if you see a big white block
# instead of the cursor!
# Option "sw_cursor"
Option "AGPMode" "4"
Option "DPMS" "on"
BusID "PCI:2:0:0"
EndSection

Section "Device"
Identifier "ATI Radeon 2"
VendorName "Unknown"
BoardName "Unknown"
Driver "fglrx"
# Clock lines

# Uncomment following option if you see a big white block
# instead of the cursor!
# Option "sw_cursor"
Option "AGPMode" "4"
Option "DPMS" "on"
BusID "PCI:2:0:1"
EndSection

Section "Screen"
Identifier "screen1"
Device "ATI Radeon"
Monitor "monitor1"
DefaultColorDepth 16
Subsection "Display"
Depth 8
Modes "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 15
Modes "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "Screen"
Identifier "screen2"
Device "ATI Radeon 2"
Monitor "monitor2"
DefaultColorDepth 16
Subsection "Display"
Depth 8
Modes "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 15
Modes "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection

Section "ServerLayout"
Identifier "layout1"
Screen "screen1"
Screen "screen2" RightOf "screen1"
# Option "Xinerama" "on"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection


Но иксы при этом не грузятся, выводят:
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) fglrx(0): PCI bus 2 card 0 func 0
(EE) fglrx(0): Given depth (16) is not supported by fglrx driver
(EE) fglrx(0): PreInitVisual failed
(EE) fglrx(0): R200PreInit failed
(II) fglrx(0): === [R200PreInit] === end
(II) UnloadModule: "fglrx"
(II) UnloadModule: "vgahw"
(II) Unloading /usr/X11R6/lib/modules/libvgahw.a
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.

Что нужно еще сделать?