ALT Linux users (in English only)
 help / color / mirror / Atom feed
From: "paul.collomb1@libertysurf.fr" <paul.collomb1@libertysurf.fr>
To: community-en <community-en@altlinux.org>
Subject: [Comm-en] PROMISE FastTrak SX4000
Date: Thu, 10 Mar 2005 20:47:14 +0100
Message-ID: <ID5IYQ$72A822ED4C8B69222A08CA8F498AB920@tiscali.fr> (raw)

[-- Attachment #1: Type: text/plain, Size: 1073 bytes --]

Hello, your distribution seems to be the only one to recognize correctly the  \r
PROMISE FastTrak SX4000 at the installation.  \r
However, it seems that the configuration of the card is not complete.  \r
I join to this mail several system files to inform you on this problem.   \r
Could you help me for assistance ?  \r
Is it possible to install ALT Linux 2.4 Master directly on a raid0 disk ?  \r
Moreover, I would like to buy a complete distribution of ALT Linux 2.4 Master  \r
but in France it is not possible !  \r
Can you give me the procedure to purchase this distribution by  \r
correspondence. (I currently test the Iso image of the first disc).    \r
Best regards.  \r
  \r
Paul COLLOMB  
************************ ADSL JUSQU'A 8 MEGA + 3 MOIS DE TELEPHONE GRATUIT ************************
L'ultra haut débit à 15EUR/mois seulement ! Et vous téléphonez gratuitement en France vers les postes fixes,
hors numéros spéciaux pendant 3 mois.
Pour profiter de cette offre exceptionnelle, cliquez ici : http://register.tiscali.fr/adsl/  (voir conditions sur le site)

[-- Attachment #2: BodyPart --]
[-- Type: text/plain, Size: 1043 bytes --]

Hello, your distribution seems to be the only one to recognize correctly the 
PROMISE FastTrak SX4000 at the installation. 
However, it seems that the configuration of the card is not complete. 
I join to this mail several system files to inform you on this problem.  
Could you help me for assistance ? 
Is it possible to install ALT Linux 2.4 Master directly on a raid0 disk ? 
Moreover, I would like to buy a complete distribution of ALT Linux 2.4 Master 
but in France it is not possible ! 
Can you give me the procedure to purchase this distribution by 
correspondence. (I currently test the Iso image of the first disc).   
Best regards. 
 
Paul COLLOMB 
************************ ADSL JUSQU'A 8 MEGA + 3 MOIS DE TELEPHONE GRATUIT ************************
L'ultra haut débit à 15EUR/mois seulement ! Et vous téléphonez gratuitement en France vers les postes fixes,
hors numéros spéciaux pendant 3 mois.
Pour profiter de cette offre exceptionnelle, cliquez ici : http://register.tiscali.fr/adsl/  (voir conditions sur le site)

[-- Attachment #3: dmesg.txt --]
[-- Type: text/plain, Size: 15370 bytes --]

BIOS Version: ASUS A7N8X-X ACPI BIOS Rev 1011
BIOS Release: 08/04/2004
System Vendor: ASUSTeK Computer INC.
Product Name: A7N8X-X
Version: REV 2.xx
Serial Number: xxxxxxxxxxx
Board Vendor: ASUSTeK Computer INC.
Board Name: A7N8X-X
Board Version: REV 2.xx
ACPI: RSDP (v000 Nvidia                                    ) @ 0x000f75c0
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff74c0
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 Pentium(tm) Pro APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, IRQ 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
Using ACPI (MADT) for SMP configuration information
Kernel command line: auto BOOT_IMAGE=linux-up ro root=301
Initializing CPU#0
Detected 1670.480 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 3335.78 BogoMIPS
Memory: 515136k/524224k available (1235k kernel code, 8672k reserved, 508k data, 136k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU:             Common caps: 0383fbff c1cbfbff 00000000 00000000
CPU: AMD Sempron(tm)   2400+ stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...  failed.
...trying to set up timer as Virtual Wire IRQ... failed.
...trying to set up timer as ExtINT IRQ... works.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1670.5079 MHz.
..... host bus clock speed is 334.1016 MHz.
cpu: 0, clocks: 3341016, slice: 1670508
CPU0<T0:3341008,T1:1670496,D:4,S:1670508,C:3341016>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20040326
PCI: PCI BIOS revision 2.10 entry at 0xfb4a0, last bus=2
PCI: Using configuration type 1
Looking for DSDT in initrd ... not found!
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4bios S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: nForce2 C1 Halt Disconnect fixup
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs *16)
ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19)
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23)
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [APCS] enabled at IRQ 23
00:00:01[A] -> 2-23 -> IRQ 23 level high
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
00:00:02[A] -> 2-22 -> IRQ 22 level high
ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
00:00:02[B] -> 2-21 -> IRQ 21 level high
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
00:00:02[C] -> 2-20 -> IRQ 20 level high
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
ACPI: PCI Interrupt Link [APCI] enabled at IRQ 21
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
ACPI: PCI Interrupt Link [APCK] enabled at IRQ 22
ACPI: PCI Interrupt Link [APCM] enabled at IRQ 21
ACPI: PCI Interrupt Link [AP3C] enabled at IRQ 20
ACPI: PCI Interrupt Link [APCZ] enabled at IRQ 22
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
00:01:06[A] -> 2-16 -> IRQ 16 level high
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
00:01:06[B] -> 2-17 -> IRQ 17 level high
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
00:01:06[C] -> 2-18 -> IRQ 18 level high
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
00:01:06[D] -> 2-19 -> IRQ 19 level high
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00170011
.......     : max redirection entries: 0017
.......     : PRQ implemented: 0
.......     : IO APIC version: 0011
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
 00 000 00  1    0    0   0   0    0    0    00
 01 001 01  0    0    0   0   0    1    1    39
 02 000 00  1    0    0   0   0    0    0    00
 03 001 01  0    0    0   0   0    1    1    41
 04 001 01  0    0    0   0   0    1    1    49
 05 001 01  0    0    0   0   0    1    1    51
 06 001 01  0    0    0   0   0    1    1    59
 07 001 01  1    0    0   0   0    1    1    61
 08 001 01  0    0    0   0   0    1    1    69
 09 001 01  0    1    0   0   0    1    1    71
 0a 001 01  0    0    0   0   0    1    1    79
 0b 001 01  0    0    0   0   0    1    1    81
 0c 001 01  0    0    0   0   0    1    1    89
 0d 001 01  0    0    0   0   0    1    1    91
 0e 001 01  0    0    0   0   0    1    1    99
 0f 001 01  0    0    0   0   0    1    1    A1
 10 001 01  1    1    0   0   0    1    1    C9
 11 001 01  1    1    0   0   0    1    1    D1
 12 001 01  1    1    0   0   0    1    1    D9
 13 001 01  1    1    0   0   0    1    1    E1
 14 001 01  1    1    0   0   0    1    1    C1
 15 001 01  1    1    0   0   0    1    1    B9
 16 001 01  1    1    0   0   0    1    1    B1
 17 001 01  1    1    0   0   0    1    1    A9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
PCI: Using ACPI for IRQ routing
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
kinoded started
VFS: Disk quotas vdquot_6.5.1
vesafb: framebuffer at 0xd0000000, mapped to 0xe0808000, size 1875k
vesafb: mode is 800x600x16, linelength=1600, pages=67
vesafb: protected mode interface info at c000:5282
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (800x600, 42776 bytes, v2).
Console: switching to colour frame buffer device 82x26
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: 00:09.0 (rev a2) UDMA133 controller
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 2B020H1, ATA DISK drive
blk: queue c03039e0, I/O limit 4095Mb (mask 0xffffffff)
hdc: HL-DT-STDVD-ROM GDR8162B, ATAPI CD/DVD-ROM drive
hdd: GoldStar CD-RW CED-8080B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 40020624 sectors (20491 MB) w/2048KiB Cache, CHS=2491/255/63, UDMA(100)
Partition check:
 hda: hda1 hda2 < hda5 hda6 >
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 314k freed
VFS: Mounted root (romfs filesystem) readonly.
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Promise FastTrak SX4000 Linux Driver Version 1.01.0.12 (27.NOV.2002)
FastTrak: Installed FastTrak SX4000 Local DIMM - 128MB
scsi0 : FastTrak SX4000
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 136k freed
Executing init=/sbin/init
Adding Swap: 248968k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Real Time Clock Driver v1.10f
ide-scsi: ignoring drive hdc
hdd: attached ide-scsi driver.
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: GoldStar  Model: CD-RW CED-8080B   Rev: 1.00
  Type:   CD-ROM                             ANSI SCSI revision: 02
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
subfs: subfs-2.4 version 0.9.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
inserting floppy driver for 2.4.26-std-up-alt6
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
Intel 810 + AC97 Audio, version 0.24, 21:57:24 Aug  3 2004
PCI: Setting latency timer of device 00:06.0 to 64
i810: NVIDIA nForce Audio found at IO 0xe000 and 0xe800, MEM 0x0000 and 0x0000, IRQ 20
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
ac97_codec: AC97 Audio codec, id: ALG32 (ALC650)
i810_audio: AC'97 codec 0, new EID value = 0x05c7
i810_audio: AC'97 codec 0, DAC map configured, total channels = 6
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
Looking for splash picture.... found (800x600, 11408 bytes, v2).
Splash status on console 0 changed to on
Looking for splash picture.... found (800x600, 11408 bytes, v2).
Splash status on console 1 changed to on
Looking for splash picture.... found (800x600, 11408 bytes, v2).
Splash status on console 2 changed to on
slmdm: version 2.7.10 Feb  4 2003 15:18:20 (Smart Link Ltd.).
slmdm: country set is 0xb5 (USA).
Looking for splash picture.... found (800x600, 11408 bytes, v2).
Splash status on console 3 changed to on
Smart Link AMRMO modem.
Looking for splash picture.... found (800x600, 11408 bytes, v2).
Splash status on console 4 changed to on
Looking for splash picture.... found (800x600, 11408 bytes, v2).
Splash status on console 5 changed to on
Looking for splash picture.... found (800x600, 11408 bytes, v2).
Splash status on console 6 changed to on
Looking for splash picture.... found (800x600, 11408 bytes, v2).
Splash status on console 7 changed to on
Looking for splash picture.... found (800x600, 11408 bytes, v2).
Splash status on console 8 changed to on
Looking for splash picture.... found (800x600, 11408 bytes, v2).
Splash status on console 9 changed to on
Looking for splash picture.... found (800x600, 11408 bytes, v2).
Splash status on console 10 changed to on
Looking for splash picture.... found (800x600, 11408 bytes, v2).
Splash status on console 11 changed to on
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected NVIDIA nForce2 chipset
agpgart: AGP aperture is 64M @ 0xd8000000
[drm] Initialized radeon 1.10.0 20020828 on minor 0: ATI Radeon QY RV100 7000/VE

[-- Attachment #4: lsmod.txt --]
[-- Type: text/plain, Size: 1559 bytes --]

Module                  Size  Used by    Tainted: P  
udf                    84512   0  (autoclean)
isofs                  26132   0  (autoclean)
zlib_inflate           19748   0  (autoclean) [isofs]
nls_koi8-r              3836   0  (autoclean)
nls_cp437               4348   0  (autoclean)
vfat                    9644   0  (autoclean)
fat                    31032   0  (autoclean) [vfat]
ide-cd                 29408   0  (autoclean)
radeon                113920   1 
agpgart                45604   3 
parport_pc             25608   1  (autoclean)
lp                      6496   0  (autoclean)
parport                23040   1  (autoclean) [parport_pc lp]
autofs4                 8212   0  (autoclean)
usbcore                58464   1 
i810_audio             22744   0 
ac97_codec             11880   0  [i810_audio]
soundcore               3652   2  [i810_audio]
sg                     30588   0  (autoclean)
sr_mod                 15024   0  (autoclean)
cdrom                  27744   0  (autoclean) [ide-cd sr_mod]
floppy                 48568   0  (autoclean)
subfs                   4296   6  (autoclean)
processor               8952   0 
button                  2796   0 
ac                      1792   0 
battery                 5968   0 
ide-scsi                9264   0 
rtc                     6236   0  (autoclean)
ext3                   62288   2 
jbd                    37852   2  [ext3]
FastTrak-sx4000       284672   0 
sd_mod                 11836   0  (unused)
scsi_mod               95064   5  [sg sr_mod ide-scsi FastTrak-sx4000 sd_mod]

[-- Attachment #5: lspci.txt --]
[-- Type: text/plain, Size: 1091 bytes --]

00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 0 (rev c1)
00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1)
00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)
00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
01:06.0 RAID bus controller: Promise Technology, Inc. PDC20621 [SX4000] 4 Channel IDE RAID Controller (rev 01)
02:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]

[-- Attachment #6: cat-proc-pci-FastTrak-0.txt --]
[-- Type: text/plain, Size: 238 bytes --]

Promise FastTrak SX4000 Linux Driver Version 1.01.0.12 (27.NOV.2002) 
Adapter1 - FastTrak SX4000
Array    Drive    - 
  1 : Maxtor   IDE1/Master  78167MB IRQ(16) UDMA5 - (FREE) 
  5 : Maxtor   IDE3/Master  78167MB IRQ(16) UDMA5 - (FREE) 

                 reply	other threads:[~2005-03-10 19:47 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='ID5IYQ$72A822ED4C8B69222A08CA8F498AB920@tiscali.fr' \
    --to=paul.collomb1@libertysurf.fr \
    --cc=community-en@altlinux.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

ALT Linux users (in English only)

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/community-en/0 community-en/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 community-en community-en/ http://lore.altlinux.org/community-en \
		community-en@lists.altlinux.org community-en@lists.altlinux.ru community-en@lists.altlinux.com
	public-inbox-index community-en

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.community-en


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git