* [Comm-en] OpenVZ + ALT Linux Sisyphus (20081222) + WebVZ
@ 2009-04-02 14:03 Alex Negulescu
2009-04-02 14:10 ` Michael Shigorin
0 siblings, 1 reply; 8+ messages in thread
From: Alex Negulescu @ 2009-04-02 14:03 UTC (permalink / raw)
To: community-en
Hello,
This is my first message on this group. Congrats and thanks to the
developers of AltLinux, this is a great job. I've been using AltLinux
for the last 4 years and it is just great.
Now, my little problem:
I use WebVZ for configuring via web new containers, and no matter what
precreated template I use, if I select "Start up the container after
creating it", I always get an "Oops". The sistem hangs apparently, I
cannot start, stop or destroy any container, I cannot kill the hangded
PIDs of vzquota (that sets the limits for the new container) and I
cannot kill the vzctl start <ID> of new container.
If I issue reboot or shutdown -r now nothing happens.
I have to reboot with the RESUIB method (Ctrl+Alt+Sys Rq+RESUIB), and
push the reset too after. It also works remounting in read only mode and
"echo 1 > /proc/sys/ kernel/sysrq","echo b > /proc/sysrq-trigger".
Any ideea ? Is the problem with WebVZ or with AltLinux kernel or OpenVZ
? I am using ALT Linux Sisyphus (20081222), kernel 2.6.27-ovz-smp-alt1.1.
If the problem is with WebVZ, what other alternative for a web
management of OpenVZ do I have, excluding HyperVM/Vtonf ?
p.s. will there appear, in the Sisyphus apt, a alterator-openvz ?
p.p.s. I tried installing the stable version of ALTLinux Server 4.0 and
altlinux-server-lite-without-repo-i586-20080917, but my board is kind of
new, having ICH10.. and it won't work in any way, enhanced sata as ide
nor compatible sata.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Comm-en] OpenVZ + ALT Linux Sisyphus (20081222) + WebVZ
2009-04-02 14:03 [Comm-en] OpenVZ + ALT Linux Sisyphus (20081222) + WebVZ Alex Negulescu
@ 2009-04-02 14:10 ` Michael Shigorin
2009-04-02 14:20 ` Alex Negulescu
0 siblings, 1 reply; 8+ messages in thread
From: Michael Shigorin @ 2009-04-02 14:10 UTC (permalink / raw)
To: community-en
On Thu, Apr 02, 2009 at 05:03:02PM +0300, Alex Negulescu wrote:
> I use WebVZ
http://webvz.sourceforge.net, right?
> Any ideea ? Is the problem with WebVZ or with AltLinux kernel
> or OpenVZ ? I am using ALT Linux Sisyphus (20081222), kernel
> 2.6.27-ovz-smp-alt1.1.
Didn't try that one, our build server currently runs this 2.6.26:
http://www.unsafe.ru/lakostis/RPMS/ALTLinux/kernel-2.6.26/repo/x86_64/RPMS.hasher/
and production systems run 2.6.18-ovz-smp-alt*.M40.*.
AFAIK 2.6.270-ovz is still considered strictly experimental.
> If the problem is with WebVZ, what other alternative for a web
> management of OpenVZ do I have, excluding HyperVM/Vtonf ?
With Sisyphus, one's currently re-developed as alterator-mkve;
didn't try that either. In Server 4.0 alterator-ovz was
considered as a default web-based management tool.
> p.s. will there appear, in the Sisyphus apt, a alterator-openvz ?
> p.p.s. I tried installing the stable version of ALTLinux Server
> 4.0 and altlinux-server-lite-without-repo-i586-20080917, but my
> board is kind of new, having ICH10.. and it won't work in any
> way, enhanced sata as ide nor compatible sata.
This *might* help (or maybe not):
ftp://ftp.linux.kiev.ua/pub/Linux/ALT/beta/server/20080821-mike
(a build with newer 2.6.18 kernel and other minor updates)
--
---- WBR, Michael Shigorin <mike@altlinux.ru>
------ Linux.Kiev http://www.linux.kiev.ua/
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Comm-en] OpenVZ + ALT Linux Sisyphus (20081222) + WebVZ
2009-04-02 14:10 ` Michael Shigorin
@ 2009-04-02 14:20 ` Alex Negulescu
2009-04-02 14:25 ` Michael Shigorin
0 siblings, 1 reply; 8+ messages in thread
From: Alex Negulescu @ 2009-04-02 14:20 UTC (permalink / raw)
To: shigorin, ALT Linux users (in English only)
Michael Shigorin wrote:
> On Thu, Apr 02, 2009 at 05:03:02PM +0300, Alex Negulescu wrote:
>
>> I use WebVZ
>>
>
> http://webvz.sourceforge.net, right?
>
Yes, exactly.
>
>> Any ideea ? Is the problem with WebVZ or with AltLinux kernel
>> or OpenVZ ? I am using ALT Linux Sisyphus (20081222), kernel
>> 2.6.27-ovz-smp-alt1.1.
>>
>
> Didn't try that one, our build server currently runs this 2.6.26:
> http://www.unsafe.ru/lakostis/RPMS/ALTLinux/kernel-2.6.26/repo/x86_64/RPMS.hasher/
>
Thanks, I'll try 2.6.26 I hope it works
> and production systems run 2.6.18-ovz-smp-alt*.M40.*.
> AFAIK 2.6.270-ovz is still considered strictly experimental.
>
>
Yes, that is right, but 2.6.18 does not work, I got a brand new board ..
with brand new issues (ICH10).
>> If the problem is with WebVZ, what other alternative for a web
>> management of OpenVZ do I have, excluding HyperVM/Vtonf ?
>>
>
> With Sisyphus, one's currently re-developed as alterator-mkve;
> didn't try that either. In Server 4.0 alterator-ovz was
> considered as a default web-based management tool.
>
>> p.s. will there appear, in the Sisyphus apt, a alterator-openvz ?
>> p.p.s. I tried installing the stable version of ALTLinux Server
>> 4.0 and altlinux-server-lite-without-repo-i586-20080917, but my
>> board is kind of new, having ICH10.. and it won't work in any
>> way, enhanced sata as ide nor compatible sata.
>>
>
> This *might* help (or maybe not):
> ftp://ftp.linux.kiev.ua/pub/Linux/ALT/beta/server/20080821-mike
> (a build with newer 2.6.18 kernel and other minor updates)
>
Server 4.0 is quite stable and good, but i can't install with the isos
there, the kernel does not see the SATA controller. (Neither enp,
enp-lite, 20080821-mike or server)
I'll try 2.6.26 and If it works I'll post back info, if it does not,
I'll start the containers after creating. The thing is I get oopses only
with webvz, if I create by hand.. all works well.
Thank you verry much Michael.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Comm-en] OpenVZ + ALT Linux Sisyphus (20081222) + WebVZ
2009-04-02 14:20 ` Alex Negulescu
@ 2009-04-02 14:25 ` Michael Shigorin
2009-04-02 14:34 ` Alex Negulescu
0 siblings, 1 reply; 8+ messages in thread
From: Michael Shigorin @ 2009-04-02 14:25 UTC (permalink / raw)
To: ALT Linux users (in English only)
On Thu, Apr 02, 2009 at 05:20:08PM +0300, Alex Negulescu wrote:
> Yes, that is right, but 2.6.18 does not work, I got a brand new
> board .. with brand new issues (ICH10).
*sigh* as always with Intel's inside.
> >This *might* help (or maybe not):
> >ftp://ftp.linux.kiev.ua/pub/Linux/ALT/beta/server/20080821-mike
> Server 4.0 is quite stable and good, but i can't install with
> the isos there, the kernel does not see the SATA controller.
> (Neither enp, enp-lite, 20080821-mike or server)
Ah. But there's another one closer to 5.0 package base:
ftp://ftp.altlinux.org/pub/people/legion/files/iso
> I'll try 2.6.26 and If it works I'll post back info, if it does
> not, I'll start the containers after creating. The thing is I
> get oopses only with webvz, if I create by hand.. all works
> well.
Let's rule out potentially kernel-related troubles first,
then look at mgmt tools.
--
---- WBR, Michael Shigorin <mike@altlinux.ru>
------ Linux.Kiev http://www.linux.kiev.ua/
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Comm-en] OpenVZ + ALT Linux Sisyphus (20081222) + WebVZ
2009-04-02 14:25 ` Michael Shigorin
@ 2009-04-02 14:34 ` Alex Negulescu
2009-04-02 14:49 ` Michael Shigorin
0 siblings, 1 reply; 8+ messages in thread
From: Alex Negulescu @ 2009-04-02 14:34 UTC (permalink / raw)
To: shigorin, ALT Linux users (in English only)
Michael Shigorin wrote:
> On Thu, Apr 02, 2009 at 05:20:08PM +0300, Alex Negulescu wrote:
>
>> Yes, that is right, but 2.6.18 does not work, I got a brand new
>> board .. with brand new issues (ICH10).
>>
>
> *sigh* as always with Intel's inside.
>
>
>>> This *might* help (or maybe not):
>>> ftp://ftp.linux.kiev.ua/pub/Linux/ALT/beta/server/20080821-mike
>>>
>> Server 4.0 is quite stable and good, but i can't install with
>> the isos there, the kernel does not see the SATA controller.
>> (Neither enp, enp-lite, 20080821-mike or server)
>>
>
> Ah. But there's another one closer to 5.0 package base:
> ftp://ftp.altlinux.org/pub/people/legion/files/iso
>
ftp://ftp.linux.kiev.ua/pub/Linux/ALT/beta/server/20081230-legion/
ftp://ftp.altlinux.org/pub/people/legion/files/iso
Is the same. That is what I installed. It has 2.6.25 by base, but when
you get the ovz kernel, you just have 2.6.27.
Now I'm trying 2.6.26 you gave me earlier.
>
>> I'll try 2.6.26 and If it works I'll post back info, if it does
>> not, I'll start the containers after creating. The thing is I
>> get oopses only with webvz, if I create by hand.. all works
>> well.
>>
>
> Let's rule out potentially kernel-related troubles first,
> then look at mgmt tools.
>
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Comm-en] OpenVZ + ALT Linux Sisyphus (20081222) + WebVZ
2009-04-02 14:34 ` Alex Negulescu
@ 2009-04-02 14:49 ` Michael Shigorin
2009-04-02 15:08 ` Alex Negulescu
0 siblings, 1 reply; 8+ messages in thread
From: Michael Shigorin @ 2009-04-02 14:49 UTC (permalink / raw)
To: ALT Linux users (in English only)
On Thu, Apr 02, 2009 at 05:34:25PM +0300, Alex Negulescu wrote:
> >>Yes, that is right, but 2.6.18 does not work, I got a brand new
> >>board .. with brand new issues (ICH10).
> >>Server 4.0 is quite stable and good, but i can't install with
> >>the isos there, the kernel does not see the SATA controller.
> >>(Neither enp, enp-lite, 20080821-mike or server)
> >Ah. But there's another one closer to 5.0 package base:
> >ftp://ftp.altlinux.org/pub/people/legion/files/iso
> ftp://ftp.linux.kiev.ua/pub/Linux/ALT/beta/server/20081230-legion/
> ftp://ftp.altlinux.org/pub/people/legion/files/iso
> Is the same.
Exactly...
> That is what I installed. It has 2.6.25 by base, but when
> you get the ovz kernel, you just have 2.6.27.
...but it should at least install on ICH10.
> Now I'm trying 2.6.26 you gave me earlier.
Well, I rather praise (and blame) lakostis@ for that kernel. :)
--
---- WBR, Michael Shigorin <mike@altlinux.ru>
------ Linux.Kiev http://www.linux.kiev.ua/
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Comm-en] OpenVZ + ALT Linux Sisyphus (20081222) + WebVZ
2009-04-02 14:49 ` Michael Shigorin
@ 2009-04-02 15:08 ` Alex Negulescu
2009-04-02 15:53 ` Michael Shigorin
0 siblings, 1 reply; 8+ messages in thread
From: Alex Negulescu @ 2009-04-02 15:08 UTC (permalink / raw)
To: shigorin, ALT Linux users (in English only)
Thanks !
The ideea is it's working, with 2.6.26 of lakostis. I saw he has some
2.6.24, 2.6.18, i`ll try them too. But I just bet with 2.6.18 won't
boot. The board did not work with any of the 4.0 release iso-s (eg.
Server, OfficeServer, Desktop), nor with the ISO's for server in beta,
except legion iso. I'll try and keep you posted.
Thanks again !
Michael Shigorin wrote:
> On Thu, Apr 02, 2009 at 05:34:25PM +0300, Alex Negulescu wrote:
>
>>>> Yes, that is right, but 2.6.18 does not work, I got a brand new
>>>> board .. with brand new issues (ICH10).
>>>> Server 4.0 is quite stable and good, but i can't install with
>>>> the isos there, the kernel does not see the SATA controller.
>>>> (Neither enp, enp-lite, 20080821-mike or server)
>>>>
>>> Ah. But there's another one closer to 5.0 package base:
>>> ftp://ftp.altlinux.org/pub/people/legion/files/iso
>>>
>> ftp://ftp.linux.kiev.ua/pub/Linux/ALT/beta/server/20081230-legion/
>> ftp://ftp.altlinux.org/pub/people/legion/files/iso
>> Is the same.
>>
>
> Exactly...
>
>
>> That is what I installed. It has 2.6.25 by base, but when
>> you get the ovz kernel, you just have 2.6.27.
>>
>
> ...but it should at least install on ICH10.
>
Well, it installs, but in the Sisyphus repo there is no openvz kernel
foir 2.6.25, and when i did apt-get.. i got a 2.6.27 for a present :)
>
>> Now I'm trying 2.6.26 you gave me earlier.
>>
>
> Well, I rather praise (and blame) lakostis@ for that kernel. :)
>
>
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2009-04-02 15:53 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-04-02 14:03 [Comm-en] OpenVZ + ALT Linux Sisyphus (20081222) + WebVZ Alex Negulescu
2009-04-02 14:10 ` Michael Shigorin
2009-04-02 14:20 ` Alex Negulescu
2009-04-02 14:25 ` Michael Shigorin
2009-04-02 14:34 ` Alex Negulescu
2009-04-02 14:49 ` Michael Shigorin
2009-04-02 15:08 ` Alex Negulescu
2009-04-02 15:53 ` Michael Shigorin
ALT Linux users (in English only)
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community-en/0 community-en/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community-en community-en/ http://lore.altlinux.org/community-en \
community-en@lists.altlinux.org community-en@lists.altlinux.ru community-en@lists.altlinux.com
public-inbox-index community-en
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community-en
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git