From: "Костарев Алексей" <kaf@nevod.ru> To: ALT Linux sysadmin discuss <sysadmins@lists.altlinux.org> Subject: Re: [Sysadmins] Ethernet-карта RTL8168b/8111b под ALTLinux 4.0 (Школьный Мастер) - некорректная работа - пакеты не уходят Date: Wed, 14 Jan 2009 18:15:12 +0500 Message-ID: <496DE560.6090000@nevod.ru> (raw) In-Reply-To: <496DE3BF.5030103@mmascience.ru> [-- Attachment #1: Type: text/plain, Size: 1673 bytes --] Владимир пишет: > Костарев Алексей пишет: >> Добрый день! >> Карта Eternet RTL8168b/8111b: >> >> lspci: >> 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. >> RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) >> >> dmesg: >> r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded >> ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 177 >> PCI: Setting latency timer of device 0000:02:00.0 to 64 >> eth0: RTL8168b/8111b at 0xf8d30000, 00:1f:c6:c4:77:be, XID 3c2000c0 >> IRQ 177 >> >> Драйвер (lsmod): r8169 >> >> Параметры задаются и определяются нормально, но пакеты не передаются >> ifconfig eth0: >> eth0 Link encap:Ethernet HWaddr 00:1F:C6:C4:77:BE inet >> addr:192.168.0.5 Bcast:192.168.0.255 Mask:255.255.255.0 >> UP BROADCAST MULTICAST MTU:1500 Metric:1 >> RX packets:2314 errors:0 dropped:3057768949 overruns:0 frame:0 >> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 >> collisions:0 txqueuelen:1000 >> RX bytes:207796 (202.9 KiB) TX bytes:0 (0.0 b) >> Interrupt:177 >> Как видно - TX=0, зато куча dropped RX-пакетов. >> >> tcpdump показывает пакеты в сети, но ни одного исходящего >> >> Что делать? >> >> >> > для начала > > lsmod > Вложил > и внимательно посмотреть, действительно ли единственный драйвер > для сетевой карточки загружен (под realtek часто подходят несколько > альтернатив, которые конфликтуют). > Судя по всему один (по крайней мере в dmesg о втором драйвер ни слова) Попробовал подключать другие модули (при выгруженном модуле r8169), где есть rtl - ничего не определяют -- С Уважением Директор ООО НЕВОД Костарев А.Ф. [-- Attachment #2: lsmod --] [-- Type: text/plain, Size: 2863 bytes --] Module Size Used by af_packet 29448 0 nls_koi8_r 9472 1 nls_cp866 9472 1 vfat 16640 1 fat 54812 1 vfat usb_storage 73024 1 libusual 21136 1 usb_storage isofs 38588 0 zlib_inflate 19200 1 isofs udf 83972 0 nls_base 11520 6 nls_koi8_r,nls_cp866,vfat,fat,isofs,udf nvidia 7830560 20 binfmt_misc 15368 1 ac 9476 0 thermal 18568 0 processor 34792 1 thermal button 10896 0 sunrpc 157116 1 iptable_filter 7168 1 ip_tables 17604 1 iptable_filter x_tables 18180 1 ip_tables fuse 49940 0 dm_mod 60312 0 tsdev 11840 0 usbhid 51040 0 snd_hda_intel 266524 1 snd_pcm_oss 47008 0 snd_seq_dummy 8196 0 snd_seq_oss 38656 0 snd_seq_midi_event 11520 1 snd_seq_oss snd_seq 56784 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event snd_seq_device 12556 3 snd_seq_dummy,snd_seq_oss,snd_seq snd_mixer_oss 21120 1 snd_pcm_oss ehci_hcd 34824 0 uhci_hcd 26764 0 usbcore 129028 6 usb_storage,libusual,usbhid,ehci_hcd,uhci_hcd snd_pcm 81540 2 snd_hda_intel,snd_pcm_oss parport_pc 42340 0 parport 39752 1 parport_pc psmouse 41992 0 intel_agp 28692 0 agpgart 37960 2 nvidia,intel_agp ide_cd 42272 0 cdrom 38304 1 ide_cd i2c_i801 11660 0 i2c_core 25216 2 nvidia,i2c_i801 r8169 35592 0 evdev 13568 1 snd_timer 26116 2 snd_seq,snd_pcm snd 59112 11 snd_hda_intel,snd_pcm_oss,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_mixer_oss,snd_pcm,snd_timer soundcore 13792 1 snd snd_page_alloc 14088 2 snd_hda_intel,snd_pcm serio_raw 11140 0 sg 37660 0 pcspkr 7296 0 floppy 60516 0 ext3 134664 2 jbd 61608 1 ext3 mbcache 12804 1 ext3 ata_piix 18056 3 libata 104468 1 ata_piix sd_mod 24576 6 scsi_mod 137096 4 usb_storage,sg,libata,sd_mod ide_disk 20352 0 ide_generic 5504 0 [permanent] generic 8964 0 [permanent] piix 13956 0 [permanent] ide_core 127560 6 usb_storage,ide_cd,ide_disk,ide_generic,generic,piix [-- Attachment #3: lspci --] [-- Type: text/plain, Size: 1517 bytes --] 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) 00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port (rev 02) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 04:00.0 VGA compatible controller: nVidia Corporation Unknown device 06e4 (rev a1) [-- Attachment #4: dmesg --] [-- Type: text/plain, Size: 23557 bytes --] Linux version 2.6.18-std-smp-alt12.M40.1 (builder@apiary.rio.altlinux.org) (gcc version 4.1.1 20070105 (ALT Linux, build 4.1.1-alt11)) #1 SMP Wed May 7 18:40:50 MSD 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ffa0000 (usable) BIOS-e820: 000000007ffa0000 - 000000007ffae000 (ACPI data) BIOS-e820: 000000007ffae000 - 000000007ffe0000 (ACPI NVS) BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 1151MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000ff780 On node 0 totalpages: 524192 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 294816 pages, LIFO batch:31 DMI 2.4 present. ACPI: RSDP (v000 ACPIAM ) @ 0x000fb050 ACPI: RSDT (v001 A_M_I_ OEMRSDT 0x03000813 MSFT 0x00000097) @ 0x7ffa0000 ACPI: FADT (v002 A_M_I_ OEMFACP 0x03000813 MSFT 0x00000097) @ 0x7ffa0200 ACPI: MADT (v001 A_M_I_ OEMAPIC 0x03000813 MSFT 0x00000097) @ 0x7ffa0390 ACPI: MCFG (v001 A_M_I_ OEMMCFG 0x03000813 MSFT 0x00000097) @ 0x7ffa0400 ACPI: OEMB (v001 A_M_I_ AMI_OEM 0x03000813 MSFT 0x00000097) @ 0x7ffae040 ACPI: HPET (v001 A_M_I_ OEMHPET 0x03000813 MSFT 0x00000097) @ 0x7ffa6ed0 ACPI: DSDT (v001 A0944 A0944000 0x00000000 INTL 0x20051117) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 7:7 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 7:7 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000) Detected 2395.056 MHz processor. Built 1 zonelists. Total pages: 524192 Kernel command line: auto BOOT_IMAGE=ALTLinux ro root=UUID=7b2dc12e-b45f-49c2-b3fe-4189ec4e620c resume=/dev/sda5 panic=30 splash=silent bootsplash: silent mode. mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2074660k/2096768k available (1591k kernel code, 20952k reserved, 638k data, 192k init, 1179264k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz Using HPET for base-timer Calibrating delay using timer specific routine.. 4793.13 BogoMIPS (lpj=9586271) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0408e3fd 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0408e3fd 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0408e3fd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code checking if image is initramfs... it is Freeing initrd memory: 538k freed ACPI: Core revision 20060707 ACPI: Looking for DSDT in initramfs... /DSDT.aml does not exist. CPU0: Intel(R) Core(TM)2 CPU E8400 @ 3.00GHz stepping 0a SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4789.89 BogoMIPS (lpj=9579791) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0408e3fd 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0408e3fd 00000000 00000001 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0408e3fd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 CPU E8400 @ 3.00GHz stepping 0a Total of 2 processors activated (9583.03 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=64 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=4 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH6 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:04:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 19 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:08: ioport range 0x290-0x297 has been reserved PCI: Bridge: 0000:00:01.0 IO window: e000-efff MEM window: dbf00000-deffffff PREFETCH window: e0000000-efffffff PCI: Bridge: 0000:00:1c.0 IO window: d000-dfff MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: c000-cfff MEM window: dbe00000-dbefffff PREFETCH window: dff00000-dfffffff PCI: Bridge: 0000:00:1e.0 IO window: b000-bfff MEM window: disabled. PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1231945034.968:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] vesafb: framebuffer at 0xdd000000, mapped to 0xf8880000, using 3750k, total 14336k vesafb: mode is 800x600x16, linelength=1600, pages=2 vesafb: protected mode interface info at c000:c790 vesafb: pmi: set display start = c00cc7f3, set palette = c00cc84e vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 105069 bytes,<6>...found (800x600, 24730 bytes, v3). Console: switching to colour frame buffer device 97x34 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered NET: Registered protocol family 1 Using IPI No-Shortcut mode ACPI: (supports S0 S1 S3 S4 S5) Time: tsc clocksource has been installed. Freeing unused kernel memory: 192k freed Executing init=/init input: AT Translated Set 2 keyboard as /class/input/input0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH7: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 217 ICH7: chipset revision 1 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: Optiarc DVD RW AD-5200A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... SCSI subsystem initialized libata version 2.00 loaded. ata_piix 0000:00:1f.2: version 2.00 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 225 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0xA800 ctl 0xA402 bmdma 0x9400 irq 225 ata2: SATA max UDMA/133 cmd 0xA000 ctl 0x9802 bmdma 0x9408 irq 225 scsi0 : ata_piix ata1.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/133 scsi1 : ata_piix ATA: abnormal status 0x7F on port 0xA007 Vendor: ATA Model: MAXTOR STM325031 Rev: 3.AA Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda4 < sda5 sda6 sda7 > sd 0:0:0:0: Attached scsi disk sda Attempting manual resume EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 input: PC Speaker as /class/input/input1 sd 0:0:0:0: Attached scsi generic sg0 type 0 r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:02:00.0 to 64 eth0: RTL8168b/8111b at 0xf8d30000, 00:1f:c6:c4:77:be, XID 3c2000c0 IRQ 177 hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66) Uniform CD-ROM driver Revision: 3.20 Linux agpgart interface v0.102 (c) Dave Jones parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 23 (level, low) -> IRQ 225 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 233 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 233, io base 0x00008000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 177, io base 0x00008400 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 50 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 50, io base 0x00008800 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 58 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 58, io base 0x00009000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 58 PCI: Setting latency timer of device 0000:00:1b.0 to 64 usb 2-1: new low speed USB device using uhci_hcd and address 2 hda_codec: Unknown model for ALC662, trying auto-probe from BIOS... usb 2-1: configuration #1 chosen from 1 choice usbcore: registered new driver hiddev input: Genius Optical Mouse as /class/input/input2 input: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:1d.1-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 233 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 233, io mem 0xdbdffc00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected ts: Compaq touchscreen protocol output usb 2-1: USB disconnect, address 2 usb 2-1: new low speed USB device using uhci_hcd and address 3 Adding 1044184k swap on /dev/sda5. Priority:-1 extents:1 across:1044184k usb 2-1: configuration #1 chosen from 1 choice input: Genius Optical Mouse as /class/input/input3 input: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:1d.1-1 EXT3 FS on sda6, internal journal device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. fuse init (API version 7.7) ip_tables: (C) 2000-2006 Netfilter Core Team r8169: eth0: link down ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU1PM] [20060707] ACPI: Processor [CPU1] (supports 8 throttling states) ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU2PM] [20060707] ACPI: Processor [CPU2] (supports 8 throttling states) ACPI Exception (acpi_processor-0678): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI Exception (acpi_processor-0678): AE_NOT_FOUND, Processor Device is not present [20060707] nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:04:00.0 to 64 NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008 r8169: eth0: link down r8169: eth0: link down r8169: eth0: link down usb 5-2: new high speed USB device using ehci_hcd and address 3 usb 5-2: configuration #1 chosen from 1 choice usbcore: registered new driver libusual Initializing USB Mass Storage driver... scsi2 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usbcore: registered new driver usb-storage usb-storage: waiting for device to settle before scanning USB Mass Storage support registered. Vendor: Model: USB DISK 2.0 Rev: PMAP Type: Direct-Access ANSI SCSI revision: 00 SCSI device sdb: 1003520 512-byte hdwr sectors (514 MB) sdb: Write Protect is off sdb: Mode Sense: 23 00 00 00 sdb: assuming drive cache: write through SCSI device sdb: 1003520 512-byte hdwr sectors (514 MB) sdb: Write Protect is off sdb: Mode Sense: 23 00 00 00 sdb: assuming drive cache: write through sdb: sdb1 sd 2:0:0:0: Attached scsi removable disk sdb sd 2:0:0:0: Attached scsi generic sg1 type 0 usb-storage: device scan complete usb 5-2: USB disconnect, address 3 usb 5-2: new high speed USB device using ehci_hcd and address 4 usb 5-2: configuration #1 chosen from 1 choice scsi3 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning Vendor: Model: USB DISK 2.0 Rev: PMAP Type: Direct-Access ANSI SCSI revision: 00 SCSI device sdb: 1003520 512-byte hdwr sectors (514 MB) sdb: Write Protect is off sdb: Mode Sense: 23 00 00 00 sdb: assuming drive cache: write through SCSI device sdb: 1003520 512-byte hdwr sectors (514 MB) sdb: Write Protect is off sdb: Mode Sense: 23 00 00 00 sdb: assuming drive cache: write through sdb: sdb1 sd 3:0:0:0: Attached scsi removable disk sdb sd 3:0:0:0: Attached scsi generic sg1 type 0 usb-storage: device scan complete usb 5-2: USB disconnect, address 4 scsi 3:0:0:0: rejecting I/O to dead device FAT: Directory bread(block 491) failed scsi 3:0:0:0: rejecting I/O to dead device FAT: Directory bread(block 492) failed scsi 3:0:0:0: rejecting I/O to dead device FAT: Directory bread(block 493) failed scsi 3:0:0:0: rejecting I/O to dead device FAT: Directory bread(block 494) failed scsi 3:0:0:0: rejecting I/O to dead device FAT: Directory bread(block 495) failed scsi 3:0:0:0: rejecting I/O to dead device FAT: Directory bread(block 496) failed scsi 3:0:0:0: rejecting I/O to dead device FAT: Directory bread(block 497) failed scsi 3:0:0:0: rejecting I/O to dead device FAT: Directory bread(block 498) failed scsi 3:0:0:0: rejecting I/O to dead device FAT: Directory bread(block 499) failed scsi 3:0:0:0: rejecting I/O to dead device FAT: Directory bread(block 500) failed scsi 3:0:0:0: rejecting I/O to dead device FAT: Directory bread(block 501) failed scsi 3:0:0:0: rejecting I/O to dead device FAT: Directory bread(block 502) failed scsi 3:0:0:0: rejecting I/O to dead device FAT: Directory bread(block 503) failed scsi 3:0:0:0: rejecting I/O to dead device FAT: Directory bread(block 504) failed scsi 3:0:0:0: rejecting I/O to dead device FAT: Directory bread(block 505) failed scsi 3:0:0:0: rejecting I/O to dead device FAT: Directory bread(block 506) failed scsi 3:0:0:0: rejecting I/O to dead device FAT: Directory bread(block 507) failed scsi 3:0:0:0: rejecting I/O to dead device FAT: Directory bread(block 508) failed scsi 3:0:0:0: rejecting I/O to dead device FAT: Directory bread(block 509) failed scsi 3:0:0:0: rejecting I/O to dead device FAT: Directory bread(block 510) failed scsi 3:0:0:0: rejecting I/O to dead device FAT: Directory bread(block 511) failed scsi 3:0:0:0: rejecting I/O to dead device FAT: Directory bread(block 512) failed scsi 3:0:0:0: rejecting I/O to dead device FAT: Directory bread(block 513) failed scsi 3:0:0:0: rejecting I/O to dead device FAT: Directory bread(block 514) failed scsi 3:0:0:0: rejecting I/O to dead device FAT: Directory bread(block 515) failed scsi 3:0:0:0: rejecting I/O to dead device FAT: Directory bread(block 516) failed scsi 3:0:0:0: rejecting I/O to dead device FAT: Directory bread(block 517) failed scsi 3:0:0:0: rejecting I/O to dead device FAT: Directory bread(block 518) failed scsi 3:0:0:0: rejecting I/O to dead device FAT: Directory bread(block 519) failed scsi 3:0:0:0: rejecting I/O to dead device FAT: Directory bread(block 520) failed scsi 3:0:0:0: rejecting I/O to dead device FAT: Directory bread(block 521) failed scsi 3:0:0:0: rejecting I/O to dead device FAT: Directory bread(block 522) failed usb 5-2: new high speed USB device using ehci_hcd and address 5 usb 5-2: configuration #1 chosen from 1 choice scsi4 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning Vendor: Model: USB DISK 2.0 Rev: PMAP Type: Direct-Access ANSI SCSI revision: 00 SCSI device sdb: 1003520 512-byte hdwr sectors (514 MB) sdb: Write Protect is off sdb: Mode Sense: 23 00 00 00 sdb: assuming drive cache: write through SCSI device sdb: 1003520 512-byte hdwr sectors (514 MB) sdb: Write Protect is off sdb: Mode Sense: 23 00 00 00 sdb: assuming drive cache: write through sdb: sdb1 sd 4:0:0:0: Attached scsi removable disk sdb sd 4:0:0:0: Attached scsi generic sg1 type 0 usb-storage: device scan complete NET: Registered protocol family 17 device eth0 entered promiscuous mode audit(1231931392.726:2): dev=eth0 prom=256 old_prom=0 auid=4294967295 device eth0 left promiscuous mode audit(1231931632.957:3): dev=eth0 prom=0 old_prom=256 auid=4294967295
next prev parent reply other threads:[~2009-01-14 13:15 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2009-01-14 12:59 Костарев Алексей 2009-01-14 13:08 ` Владимир 2009-01-14 13:15 ` Костарев Алексей [this message] 2009-01-14 13:21 ` Andrii Dobrovol`s`kii 2009-01-14 14:26 ` Sergey Vlasov 2009-01-15 8:25 ` [Sysadmins] Ethernet-карта RTL8168b/8111b под ALTLinux 4.0 ( Школьный Мастер ) " Alexey Borovskoy 2009-01-15 9:04 ` Костарев Алексей 2009-01-16 14:41 ` [Sysadmins] Ethernet-карта RTL8168b/8111b под ALTLinux 4.0 ( Школьный Мастер) " Костарев Алексей 2009-01-16 15:08 ` Костарев Алексей 2009-01-20 10:16 ` Костарев Алексей
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=496DE560.6090000@nevod.ru \ --to=kaf@nevod.ru \ --cc=sysadmins@lists.altlinux.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux sysadmins discussion This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/sysadmins/0 sysadmins/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 sysadmins sysadmins/ http://lore.altlinux.org/sysadmins \ sysadmins@lists.altlinux.org sysadmins@lists.altlinux.ru sysadmins@lists.altlinux.com public-inbox-index sysadmins Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.sysadmins AGPL code for this site: git clone https://public-inbox.org/public-inbox.git