Hi,

Did you try blacklisting one module or the other, to see what's up ?
Like:
/etc/modprobe.d/blacklist-ide:
blacklist ide-pci-generic
blacklist piix
blacklist ide-core

Mike Lykov wrote:
>>  > пробовал пересобрать насильно инитрд - бесполезно. при загрузке ядра
>>  Через make-initrd?
>>  После пересборки initrd перезапускал lilo?
>>     
> .
>   
>>  Винт SATA или PATA? В lilo.conf прописано через UUID или /dev/sda1?
>>     
>
> добавлю к статистике, хоть это и не отвечает на исходный вопрос
> у меня после установки ядра 
> 2.6.32-un-def-alt11 #1 SMP PREEMPT Sat Apr 3 04:29:11 UTC 2010 i686 GNU/Linux
> диск
> [    1.508300] ata7.00: ATA-7: Hitachi HDT725025VLA380, V5DOA52A, max UDMA/133
> [    2.000087] scsi 6:0:0:0: Direct-Access     ATA      Hitachi HDT72502 V5DO PQ: 0 ANSI: 5
> [    2.001482] sd 6:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
> [    2.002655] sd 6:0:0:0: [sda] Write Protect is off
> [    2.003812] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [    2.003825] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [    2.008583]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 > sda3
> [    2.102971] sd 6:0:0:0: [sda] Attached SCSI disk
>
> initrd штатный (не пересобирал)
> lrwxrwxrwx 1 root root      30 Apr  6 18:13 initrd.img -> initrd-2.6.32-un-def-alt11.img
>
> [root@combr-Athlon-7750 boot]# zcat initrd-2.6.32-un-def-alt11.img |cpio -t |fgrep .ko
> 3731 blocks
> lib/modules/2.6.32-un-def-alt11/kernel/fs/ext3/ext3.ko
> lib/modules/2.6.32-un-def-alt11/kernel/fs/jbd/jbd.ko
> lib/modules/2.6.32-un-def-alt11/kernel/fs/mbcache.ko
> lib/modules/2.6.32-un-def-alt11/kernel/lib/crc-t10dif.ko
> lib/modules/2.6.32-un-def-alt11/kernel/drivers/ata/ata_generic.ko
> lib/modules/2.6.32-un-def-alt11/kernel/drivers/ata/sata_nv.ko
> lib/modules/2.6.32-un-def-alt11/kernel/drivers/ata/pata_amd.ko
> lib/modules/2.6.32-un-def-alt11/kernel/drivers/ata/pata_acpi.ko
> lib/modules/2.6.32-un-def-alt11/kernel/drivers/ata/libata.ko
> lib/modules/2.6.32-un-def-alt11/kernel/drivers/scsi/sd_mod.ko
> lib/modules/2.6.32-un-def-alt11/kernel/drivers/scsi/scsi_mod.ko
>
> image="/boot/vmlinuz-2.6.32-un-def-alt11"
>         initrd="/boot/initrd-2.6.32-un-def-alt11.img"
>         label="2632-un-def-11"
>         root="UUID=6a191d06-a405-4211-a391-bcad43abd0d7"
>         read-only
>         optional
>
> "если это что-то скажет" .
>
>   


-- 
Alex Negulescu
Best regards from Romania
PGP Key: 0x4222D8AA @ hkp://keys.gnupg.net