From: Alexandr Isaev <alex_is@sakhalin.ru> To: Sisyphus ALT Linux <sisyphus@lists.altlinux.org> Subject: [sisyphus] загрузка ненужного модуля и глюк IDE Date: Tue, 06 Mar 2007 11:58:49 +1000 Message-ID: <45ECCAD9.8080109@sakhalin.ru> (raw) 1. Заменил у себя материнскую плату, на старой был чипсет VIA82что-тотам, на новой Intel82801/82865 Вынес из /etc/modules* все упоминания о VIA, даже запихал его в /etc/modules.d/blacklist и /etc/modprobe/blacklist, но после перезагрузки наблюдаю картинку: #lsmod via82cxxx 9732 0 [permanent] ide_core 124232 6 ide_cd,piix,ide_disk,ide_generic,generic,via82cxxx Где эта зараза могла прописаться? 2. Не знаю, связано это с первой проблемой или нет 2xHDD новые 160ГБ # hdparm -i /dev/hda /dev/hda: Model=ST3160212A, FwRev=3.AAJ, SerialNo=9LS02KJ9 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4 BuffType=unknown, BuffSize=2048kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 udma3 udma4 *udma5 AdvancedPM=no WriteCache=enabled Drive conforms to: Unspecified: ATA/ATAPI-1 ATA/ATAPI-2 ATA/ATAPI-3 ATA/ATAPI-4 ATA/ATAPI-5 ATA/ATAPI-6 ATA/ATAPI-7 [root@host ~]# hdparm /dev/hda /dev/hda: multcount = 16 (on) IO_support = 3 (32-bit w/sync) unmaskirq = 0 (off) using_dma = 0 (off) ^^^^^^^^^^^^^^^^^^^^^^^^^ keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 19457/255/63, sectors = 312581808, start = 0 [root@host ~]# hdparm -d1 /dev/hda /dev/hda: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma = 0 (off) ну и как следствие: # hdparm -t /dev/hda /dev/hda: Timing buffered disk reads: 14 MB in 3.23 seconds = 4.34 MB/sec :((( на работе более старая мать на родственном чипсете и все работает на ура (HDD как дома): # hdparm -t /dev/hda /dev/hda: Timing buffered disk reads: 160 MB in 3.03 seconds = 52.86 MB/sec (конфиги /etc/modules*,modprobe*,hotplug, system сверял - вроде все конфиги идентичны в пределах погрешности). погуглил, почитал доки и никакого внятного решения не нашел. Одни пишут, что надо подключать модуль читсета, другие что какие-то опции прописывать... по своему чипсету нашел только i2c-i801 модуль, при этом, если я правильно понял, IDE у меня должен рулить piix ... похоже я совсем запутался и полез куда-то не туда... хеелп, наставте меня на путь истенный, а то даже не представляю куда смотреть и что читать.
next reply other threads:[~2007-03-06 1:58 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2007-03-06 1:58 Alexandr Isaev [this message] 2007-03-06 2:22 ` Ivan Adzhubey 2007-03-06 3:05 ` Alexandr Isaev 2007-03-11 15:09 ` Michael Shigorin
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=45ECCAD9.8080109@sakhalin.ru \ --to=alex_is@sakhalin.ru \ --cc=sisyphus@lists.altlinux.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Sisyphus discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/sisyphus/0 sisyphus/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 sisyphus sisyphus/ http://lore.altlinux.org/sisyphus \ sisyphus@altlinux.ru sisyphus@altlinux.org sisyphus@lists.altlinux.org sisyphus@lists.altlinux.ru sisyphus@lists.altlinux.com sisyphus@linuxteam.iplabs.ru sisyphus@list.linux-os.ru public-inbox-index sisyphus Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.sisyphus AGPL code for this site: git clone https://public-inbox.org/public-inbox.git