256MB LOWMEM available.
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 952.171 MHz processor.
Memory: 256116k/262144k available (1194k kernel code, 5640k reserved, 1055k data, 128k init, 0k highmem)
CPU: AMD Duron(tm) processor stepping 01
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
..... CPU clock speed is 952.1302 MHz.
..... host bus clock speed is 200.4483 MHz.
ACPI: Subsystem revision 20030619
PCI: PCI BIOS revision 2.10 entry at 0xfb2a0, last bus=1
PCI: Using configuration type 1
ACPI: System description tables not found
    ACPI-0083: *** Error: acpi_load_tables: Could not get RSDP, AE_NOT_FOUND
    ACPI-0133: *** Error: acpi_load_tables: Could not load tables: AE_NOT_FOUND
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
Applying VIA southbridge workaround.
PCI: Disabling Via external APIC routing
fb0: VESA VGA frame buffer device
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
    ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio
hda: SAMSUNG SV4002H, ATA DISK drive
blk: queue c0384600, I/O limit 4095Mb (mask 0xffffffff)
hdc: _NEC CD-RW NR-7800B, ATAPI CD/DVD-ROM drive
hdd: FX400E, ATAPI CD/DVD-ROM drive
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 204M
agpgart: Detected Via Apollo Pro KT133 chipset
eth0: RealTek RTL-8029 found at 0xe800, IRQ 11, 00:E0:7D:A5:1A:01.
nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module  1.0-4496  Wed Jul 16 19:03:09 PDT 2003