From: Alexey Morsov <samurai@ricom.ru>
To: sisyphus@lists.altlinux.org
Subject: Re: [sisyphus] hp sj2200c and sane
Date: Wed, 26 Apr 2006 11:29:30 +0400
Message-ID: <20060426072930.GA10440@ricom.ru> (raw)
In-Reply-To: <200604252311.35363.lav@altlinux.ru>
[-- Attachment #1: Type: text/plain, Size: 12859 bytes --]
On Tue, Apr 25, 2006 at 11:11:34PM +0400, Vitaly Lipatov wrote:
> On Tuesday 25 April 2006 13:05, Alexey Morsov wrote:
> >
> > scanimage -L уверяет что устройства не найдено (и xsane), но
> Покажите из-под root:
> # SANE_DEBUG_PLUSTEK=20 scanimage -L
>
> И grep -v "^#" /etc/sane.d/plustek.conf
root@alexey ~ # SANE_DEBUG_PLUSTEK=20 scanimage -L
[sanei_debug] Setting debug level of plustek to 20.
[plustek] Plustek backend V0.50-7, part of sane-backends 1.0.17
[plustek] Retrieving all supported and conntected devices
[plustek] Checking for 0x07b3-0x0010
[plustek] Checking for 0x07b3-0x0011
[plustek] Checking for 0x07b3-0x0017
[plustek] Checking for 0x07b3-0x0015
[plustek] Checking for 0x07b3-0x0017
[plustek] Checking for 0x07b3-0x0013
[plustek] Checking for 0x07b3-0x0013
[plustek] Checking for 0x07b3-0x0011
[plustek] Checking for 0x07b3-0x0010
[plustek] Checking for 0x07b3-0x0014
[plustek] Checking for 0x07b3-0x0015
[plustek] Checking for 0x07b3-0x0014
[plustek] Checking for 0x07b3-0x0016
[plustek] Checking for 0x07b3-0x0017
[plustek] Checking for 0x07b3-0x0017
[plustek] Checking for 0x07b3-0x0007
[plustek] Checking for 0x07b3-0x000f
[plustek] Checking for 0x07b3-0x000f
[plustek] Checking for 0x07b3-0x0005
[plustek] Checking for 0x07b3-0x0014
[plustek] Checking for 0x07b3-0x0012
[plustek] Checking for 0x0400-0x1000
[plustek] Checking for 0x0400-0x1001
[plustek] Checking for 0x0400-0x1001
[plustek] Checking for 0x0458-0x2007
[plustek] Checking for 0x0458-0x2008
[plustek] Checking for 0x0458-0x2009
[plustek] Checking for 0x0458-0x2013
[plustek] Checking for 0x0458-0x2015
[plustek] Checking for 0x0458-0x2016
[plustek] Checking for 0x03f0-0x0505
[plustek] Checking for 0x03f0-0x0605
[plustek] Checking for 0x04b8-0x010f
[plustek] Checking for 0x04b8-0x011d
[plustek] Checking for 0x1606-0x0050
[plustek] Checking for 0x1606-0x0060
[plustek] Checking for 0x1606-0x0160
[plustek] Checking for 0x049f-0x001a
[plustek] Checking for 0x04a9-0x2206
[plustek] Checking for 0x04a9-0x2207
[plustek] Checking for 0x04a9-0x2208
[plustek] Checking for 0x04a9-0x220d
[plustek] Checking for 0x04a9-0x220e
[plustek] Checking for 0x04a9-0x2220
[plustek] Available and supported devices:
[plustek] Device: >libusb:001:003< - 0x03f0x0x0605
[plustek] ># Plustek-SANE Backend configuration file<
[plustek] ># For use with LM9831/2/3 based USB scanners<
[plustek] >#<
[plustek] ><
[plustek] ># each device needs at least two lines:<
[plustek] ># - [usb] vendor-ID and product-ID<
[plustek] ># - device devicename<
[plustek] ># i.e. for Plustek (0x07B3) UT12/16/24 (0x0017)<
[plustek] ># [usb] 0x07B3 0x0017<
[plustek] ># device /dev/usbscanner<
[plustek] ># or<
[plustek] ># device libusb:bbb:ddd<
[plustek] ># where bbb is the busnumber and ddd the device number<
[plustek] ># make sure that your user has access to /proc/bus/usb/bbb/ddd<
[plustek] >#<
[plustek] ># additionally you can specify some options<
[plustek] ># warmup, lOffOnEnd, lampOff<
[plustek] >#<
[plustek] ># For autodetection use<
[plustek] ># [usb]<
[plustek] ># device /dev/usbscanner<
[plustek] >#<
[plustek] ># or simply<
[plustek] ># [usb]<
[plustek] >#<
[plustek] ># or if you want a specific device but you have no idea about the<
[plustek] ># device node or you use libusb, simply set vendor- and product-ID<
[plustek] ># [usb] 0x07B3 0x0017<
[plustek] ># device auto<
[plustek] >#<
[plustek] ># NOTE: autodetection is safe, as it uses the info it got<
[plustek] ># from the USB subsystem. If you're not using the<
[plustek] ># autodetection, you MUST have attached that device<
[plustek] ># at your USB-port, that you have specified...<
[plustek] >#<
[plustek] ><
[plustek] >[usb] 0x03f0 0x0605<
[plustek] next device is a USB device (0x03F0-0x0605)
[plustek] ... next device
[plustek] ><
[plustek] >#<
[plustek] ># options for the previous USB entry<
[plustek] >#<
[plustek] ># switch lamp off after xxx secs, 0 disables the feature<
[plustek] ># (can also be set via frontend)<
[plustek] >option lampOff 300<
[plustek] Decoding option >lampOff<
[plustek] ><
[plustek] ># warmup period in seconds, 0 means no warmup, -1 means auto-warmup<
[plustek] ># (can also be set via frontend)<
[plustek] >option warmup -1<
[plustek] Decoding option >warmup<
[plustek] ><
[plustek] ># 0 means leave lamp-status untouched, not 0 means switch off<
[plustek] ># on sane_close<
[plustek] ># (can also be set via frontend)<
[plustek] >option lOffOnEnd 1<
[plustek] Decoding option >lOffOnEnd<
[plustek] ><
[plustek] >#<
[plustek] ># options to tweak the image start-position<
[plustek] ># (WARNING: there's no internal range check!!!)<
[plustek] >#<
[plustek] ># for the normal scan area<
[plustek] >#<
[plustek] >option posOffX 0<
[plustek] Decoding option >posOffX<
[plustek] >option posOffY 0<
[plustek] Decoding option >posOffY<
[plustek] ><
[plustek] ># for transparencies<
[plustek] >option tpaOffX 0<
[plustek] Decoding option >tpaOffX<
[plustek] >option tpaOffY 0<
[plustek] Decoding option >tpaOffY<
[plustek] ><
[plustek] ># for negatives<
[plustek] >option negOffX 0<
[plustek] Decoding option >negOffX<
[plustek] >option negOffY 0<
[plustek] Decoding option >negOffY<
[plustek] ><
[plustek] >#<
[plustek] ># for setting the calibration strip position<
[plustek] ># (WARNING: there's no internal range check!!!)<
[plustek] ># -1 means use built in<
[plustek] ># (can also be set via frontend)<
[plustek] >option posShadingY -1<
[plustek] Decoding option >posShadingY<
[plustek] >option tpaShadingY -1<
[plustek] Decoding option >tpaShadingY<
[plustek] >option negShadingY -1<
[plustek] Decoding option >negShadingY<
[plustek] ><
[plustek] >#<
[plustek] ># to invert the negatives, 0 disables the feature<
[plustek] >#<
[plustek] >option invertNegatives 0<
[plustek] Decoding option >invertNegatives<
[plustek] ><
[plustek] >#<
[plustek] ># to disable the internal sensor speedup function,<
[plustek] ># 1 disables the feature<
[plustek] >#<
[plustek] >option disableSpeedup 0<
[plustek] Decoding option >disableSpeedup<
[plustek] ><
[plustek] >#<
[plustek] ># to save/restore coarse calibration data<
[plustek] ># (can also be set via frontend)<
[plustek] >option cacheCalData 0<
[plustek] Decoding option >cacheCalData<
[plustek] ><
[plustek] >#<
[plustek] ># use alternate calibration routines<
[plustek] >#<
[plustek] >option altCalibration 0<
[plustek] Decoding option >altCalibration<
[plustek] ><
[plustek] >#<
[plustek] ># for skipping whole calibration step<
[plustek] >#<
[plustek] >option skipCalibration 0<
[plustek] Decoding option >skipCalibration<
[plustek] ><
[plustek] >#<
[plustek] ># for skipping entire fine calibration step<
[plustek] ># coarse calibration is done<
[plustek] >#<
[plustek] >option skipFine 0<
[plustek] Decoding option >skipFine<
[plustek] ><
[plustek] >#<
[plustek] ># discard the result of the fine white calibration<
[plustek] >#<
[plustek] >option skipFineWhite 0<
[plustek] Decoding option >skipFineWhite<
[plustek] ><
[plustek] ># for replacing the gain values found during coarse<
[plustek] ># calibration<
[plustek] ># (can also be set via frontend)<
[plustek] >option red_gain -1<
[plustek] Decoding option >red_gain<
[plustek] >option green_gain -1<
[plustek] Decoding option >green_gain<
[plustek] >option blue_gain -1<
[plustek] Decoding option >blue_gain<
[plustek] ><
[plustek] ># for replacing the offset values found during coarse<
[plustek] ># calibration<
[plustek] ># (can also be set via frontend)<
[plustek] >option red_offset -1<
[plustek] Decoding option >red_offset<
[plustek] >option green_offset -1<
[plustek] Decoding option >green_offset<
[plustek] >option blue_offset -1<
[plustek] Decoding option >blue_offset<
[plustek] ><
[plustek] >#<
[plustek] ># for replacing the default lampoff settings, this<
[plustek] ># works only for CIS devices like CanoScan LiDE20<
[plustek] ># (can also be set via frontend)<
[plustek] >option red_lampoff -1<
[plustek] Decoding option >red_lampoff<
[plustek] >option green_lampoff -1<
[plustek] Decoding option >green_lampoff<
[plustek] >option blue_lampoff -1<
[plustek] Decoding option >blue_lampoff<
[plustek] ><
[plustek] >#<
[plustek] ># for adjusting the default gamma values<
[plustek] ># (can also be set via frontend)<
[plustek] >option redGamma 1.0<
[plustek] Decoding option >redGamma<
[plustek] >option greenGamma 1.0<
[plustek] Decoding option >greenGamma<
[plustek] >option blueGamma 1.0<
[plustek] Decoding option >blueGamma<
[plustek] >option grayGamma 1.0<
[plustek] Decoding option >grayGamma<
[plustek] ><
[plustek] >#<
[plustek] ># to enable TPA (EPSON or UMAX, if autodetection fails)<
[plustek] ># 0 means default behaviour as specified in the internal tables<
[plustek] ># 1 means enable (needed for UMAX 3450)<
[plustek] >option enableTPA 0<
[plustek] Decoding option >enableTPA<
[plustek] ><
[plustek] >#<
[plustek] ># model override functionality, currently only available for<
[plustek] ># Mustek devices, using NSCs' vendor ID: 0x0400 and<
[plustek] ># also their product ID: 0x1000 (LM9831) 0x1001 (LM9832)<
[plustek] >#<
[plustek] ># mov/PID | 0x1000 | 0x1001<
[plustek] ># ---------------------------------------<
[plustek] ># 0 (default)| BearPaw1200 | BearPaw 2400<
[plustek] ># 1 | ignored | BearPaw 1200<
[plustek] >#<
[plustek] >option mov 0<
[plustek] Decoding option >mov<
[plustek] ><
[plustek] >#<
[plustek] ># and of course the device-name<
[plustek] >#<
[plustek] ># device /dev/usbscanner<
[plustek] >device auto<
[plustek] Decoding device name >auto<
[plustek] ><
[plustek] >#<
[plustek] ># to define a new device, start with a new section:<
[plustek] ># [usb]<
[plustek] >#<
[plustek] attach (auto, 0xafd86350, (nil))
[plustek] Device configuration:
[plustek] device name : >auto<
[plustek] USB-ID : >0x03F0-0x0605<
[plustek] model ovr. : 0
[plustek] warmup : -1s
[plustek] lampOff : 300
[plustek] lampOffOnEnd : yes
[plustek] cacheCalData : no
[plustek] altCalibrate : no
[plustek] skipCalibr. : no
[plustek] skipFine : no
[plustek] skipFineWhite: no
[plustek] invertNegs. : no
[plustek] dis.Speedup : no
[plustek] pos_x : 0
[plustek] pos_y : 0
[plustek] pos_shading_y: -1
[plustek] neg_x : 0
[plustek] neg_y : 0
[plustek] neg_shading_y: -1
[plustek] tpa_x : 0
[plustek] tpa_y : 0
[plustek] tpa_shading_y: -1
[plustek] red gain : -1
[plustek] green gain : -1
[plustek] blue gain : -1
[plustek] red offset : -1
[plustek] green offset : -1
[plustek] blue offset : -1
[plustek] red lampoff : -1
[plustek] green lampoff: -1
[plustek] blue lampoff : -1
[plustek] red Gamma : 1.00
[plustek] green Gamma : 1.00
[plustek] blue Gamma : 1.00
[plustek] gray Gamma : 1.00
[plustek] ---------------------
[plustek] usbDev_open(auto,0x03F0-0x0605) - 0x806ded8
[plustek] sanei_access_lock failed: 11
[plustek] open failed: -1
[plustek] sane_get_devices (0xafd88478, 0)
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[plustek] sane_exit
root@alexey ~ # grep -v "^#" /etc/sane.d/plustek.conf
[usb] 0x03f0 0x0605
option lampOff 300
option warmup -1
option lOffOnEnd 1
option posOffX 0
option posOffY 0
option tpaOffX 0
option tpaOffY 0
option negOffX 0
option negOffY 0
option posShadingY -1
option tpaShadingY -1
option negShadingY -1
option invertNegatives 0
option disableSpeedup 0
option cacheCalData 0
option altCalibration 0
option skipCalibration 0
option skipFine 0
option skipFineWhite 0
option red_gain -1
option green_gain -1
option blue_gain -1
option red_offset -1
option green_offset -1
option blue_offset -1
option red_lampoff -1
option green_lampoff -1
option blue_lampoff -1
option redGamma 1.0
option greenGamma 1.0
option blueGamma 1.0
option grayGamma 1.0
option enableTPA 0
option mov 0
device auto
--
С уважением,
Алексей Морсов
системный администратор ЗАО "ИК "Риком-Траст"
ICQ: 196-766-290
Jabber: samurai@www.fondmarket.ru
www.ricom.ru
www.fondmarket.ru
[playing] Yoko Kanno - Cowboy Bebop - Ask DNA Single - AsK DNA (2001)
Ставить отдельные пакеты из Сизифа на Мастер 2.4 - верный путь
к подрыву системы. Правда, иногда apt'у удаётся это предупредить.
-- ktirf in sisyphus@
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 481 bytes --]
next prev parent reply other threads:[~2006-04-26 7:29 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-04-25 9:05 Alexey Morsov
2006-04-25 19:11 ` Vitaly Lipatov
2006-04-26 7:29 ` Alexey Morsov [this message]
2006-04-26 20:40 ` Vitaly Lipatov
2006-04-27 8:07 ` Alexey Morsov
2006-04-27 9:49 ` Anton Farygin
2006-04-27 10:37 ` Alexey Morsov
2006-04-27 11:16 ` Anton Farygin
2006-04-27 14:50 ` Alexey Morsov
2006-04-27 19:40 ` Vitaly Lipatov
2006-04-28 8:17 ` Alexey Morsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060426072930.GA10440@ricom.ru \
--to=samurai@ricom.ru \
--cc=sisyphus@lists.altlinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux Sisyphus discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus/0 sisyphus/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus sisyphus/ http://lore.altlinux.org/sisyphus \
sisyphus@altlinux.ru sisyphus@altlinux.org sisyphus@lists.altlinux.org sisyphus@lists.altlinux.ru sisyphus@lists.altlinux.com sisyphus@linuxteam.iplabs.ru sisyphus@list.linux-os.ru
public-inbox-index sisyphus
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git