Linux version 2.4.22-std-up-alt12 (builder@mash.office.altlinux.ru) (gcc version 2.96 20000731 (ALT Linux, build 2.96-alt5)) #1 Sat Nov 29 21:48:54 MSK 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffec000 (usable) BIOS-e820: 000000001ffec000 - 000000001ffef000 (ACPI data) BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved) BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. ACPI: have wakeup address 0xc0001000 On node 0 totalpages: 131052 zone(0): 4096 pages. zone(1): 126956 pages. zone(2): 0 pages. DMI 2.3 present. 49 structures occupying 1354 bytes. DMI table at 0x000F0040. BIOS Vendor: Award Software, Inc. BIOS Version: ASUS P4B533 ACPI BIOS Revision 1011 BIOS Release: 09/27/2002 System Vendor: System Manufacturer Product Name: System Name Version: System Version Serial Number: SYS-1234567890 Board Vendor: ASUSTeK Computer INC. Board Name: P4B533 Board Version: REV 1.xx ACPI: RSDP (v000 ASUS ) @ 0x000f5270 ACPI: RSDT (v001 ASUS P4B533 0x42302e31 MSFT 0x31313031) @ 0x1ffec000 ACPI: FADT (v001 ASUS P4B533 0x42302e31 MSFT 0x31313031) @ 0x1ffec0c0 ACPI: BOOT (v001 ASUS P4B533 0x42302e31 MSFT 0x31313031) @ 0x1ffec030 ACPI: MADT (v001 ASUS P4B533 0x42302e31 MSFT 0x31313031) @ 0x1ffec058 ACPI: DSDT (v001 ASUS P4B533 0x00001000 MSFT 0x0100000b) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 Pentium 4(tm) XEON(tm) APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x1] trigger[0x1] lint[0x1]) Kernel command line: auto BOOT_IMAGE=linux-up ro root=302 acpi_irq_nobalance, pci=noacpi ACPI STATIC SET Found and enabled local APIC! Initializing CPU#0 Detected 2221.919 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 4430.23 BogoMIPS Memory: 515412k/524208k available (1192k kernel code, 8408k reserved, 501k data, 132k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 128K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU: Intel(R) Celeron(R) CPU 2.20GHz stepping 07 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2221.9430 MHz. ..... host bus clock speed is 100.9972 MHz. cpu: 0, clocks: 1009972, slice: 504986 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20031002 PCI: PCI BIOS revision 2.10 entry at 0xf1ea0, last bus=2 PCI: Using configuration type 1 Looking for DSDT in initrd ... not found! ACPI: IRQ9 SCI: Level Trigger. ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S4 S5) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Enabled i801 SMBus device PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] PCI: Probing PCI hardware PCI: Using IRQ router PIIX [8086/24c0] at 00:1f.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Disk quotas vdquot_6.5.1 vesafb: framebuffer at 0xf0000000, mapped to 0xe0809000, size 1875k vesafb: mode is 800x600x16, linelength=1600, pages=33 vesafb: protected mode interface info at c000:5470 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Looking for splash picture.... found (800x600, 15525 bytes, v2). Console: switching to colour frame buffer device 82x26 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 00:1f.1 PCI: Found IRQ 10 for device 00:1f.1 PCI: Sharing IRQ 10 with 00:1d.2 ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio hda: IC35L060AVVA07-0, ATA DISK drive blk: queue c02f6880, I/O limit 4095Mb (mask 0xffffffff) hdc: _NEC CD-RW NR-9100A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 120103200 sectors (61493 MB) w/1863KiB Cache, CHS=7476/255/63, UDMA(100) Partition check: hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 114k freed VFS: Mounted root (romfs filesystem) readonly. Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 132k freed Executing init=/sbin/init Adding Swap: 1020088k swap-space (priority -1) EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal SCSI subsystem driver Revision: 1.00 hdc: attached ide-scsi driver. scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: _NEC Model: CD-RW NR-9100A Rev: 1.11 Type: CD-ROM ANSI SCSI revision: 02 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal EXT3-fs: mounted filesystem with ordered data mode. reiserfs: found format "3.6" with standard journal reiserfs: checking transaction log (device ide0(3,8)) ... for (ide0(3,8)) ide0(3,8):Using r5 hash to sort names