The number of cylinders for this disk is set to 4865.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
   (e.g., DOS FDISK, OS/2 FDISK)

Command (m for help): 
Expert command (m for help): 
Disk /dev/hdc: 255 heads, 63 sectors, 4865 cylinders

Nr AF  Hd Sec  Cyl  Hd Sec  Cyl    Start     Size ID
 1 80   1   1    0  15  63 1023       63  1034145 83
Partition 1 does not end on cylinder boundary:
     phys=(1023, 15, 63) should be (1023, 254, 63)
 2 00   0   1 1023  15  63 1023  1034208  2233728 83
Partition 2 does not end on cylinder boundary:
     phys=(1023, 15, 63) should be (1023, 254, 63)
 3 00   0   1 1023  15  63 1023  3267936 65350656 83
Partition 3 does not end on cylinder boundary:
     phys=(1023, 15, 63) should be (1023, 254, 63)
 4 00   0   1 1023  15  63 1023 68618592  9546768 05
Partition 4 does not end on cylinder boundary:
     phys=(1023, 15, 63) should be (1023, 254, 63)
 5 00   1   1 1023  15  63 1023       63  8676801 83
 6 00   1   1 1023  15  63 1023       63   869841 82

Expert command (m for help):