From: Girar Builder awaiter robot <girar-builder@altlinux.org>
To: Aleksei Nikiforov <darktemplar@altlinux.org>
Cc: sisyphus-incominger@lists.altlinux.org,
girar-builder-sisyphus@altlinux.org
Subject: [#242910] FAILED linuxcnc.git=2.7.14-alt3
Date: Fri, 13 Dec 2019 21:30:44 +0000
Message-ID: <20191213213044.GA24927@gyle.altlinux.org> (raw)
http://git.altlinux.org/tasks/242910/logs/events.1.1.log
2019-Dec-13 21:16:26 :: task #242910 for sisyphus started by darktemplar:
#100 build 2.7.14-alt3 from /gears/l/linuxcnc.git fetched at 2019-Dec-13 11:33:01
2019-Dec-13 21:16:27 :: [i586] #100 linuxcnc.git 2.7.14-alt3: build start
2019-Dec-13 21:16:27 :: [ppc64le] #100 linuxcnc.git 2.7.14-alt3: build start
2019-Dec-13 21:16:27 :: [x86_64] #100 linuxcnc.git 2.7.14-alt3: build start
2019-Dec-13 21:16:27 :: [aarch64] #100 linuxcnc.git 2.7.14-alt3: build start
2019-Dec-13 21:16:42 :: [ppc64le] #100 linuxcnc.git 2.7.14-alt3: build SKIPPED
In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags
130 | #error HAL needs RTAPI/ULAPI, check makefile and flags
cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h: cpp failed
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
cpp.req: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h: cpp failed, trying c++ mode
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h: cpp failed
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/canon.hh:17:10: fatal error: vector: No such file or directory
17 | #include <vector>
--
from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/gomath.h:23:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
--
from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/inihal.hh:22:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/inihal.hh:22:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags
130 | #error HAL needs RTAPI/ULAPI, check makefile and flags
--
In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_io.h:19:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
--
In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_pci.h:41:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
2019-Dec-13 21:19:54 :: [x86_64] linuxcnc.git 2.7.14-alt3: remote: build failed
2019-Dec-13 21:19:54 :: [x86_64] #100 linuxcnc.git 2.7.14-alt3: build FAILED
2019-Dec-13 21:19:54 :: [x86_64] requesting cancellation of task processing
In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags
130 | #error HAL needs RTAPI/ULAPI, check makefile and flags
cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h: cpp failed
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
cpp.req: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h: cpp failed, trying c++ mode
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h: cpp failed
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/canon.hh:17:10: fatal error: vector: No such file or directory
17 | #include <vector>
--
from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/gomath.h:23:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
--
from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/inihal.hh:22:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/inihal.hh:22:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags
130 | #error HAL needs RTAPI/ULAPI, check makefile and flags
--
In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_io.h:19:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
--
In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_pci.h:41:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
2019-Dec-13 21:20:11 :: [i586] linuxcnc.git 2.7.14-alt3: remote: build failed
2019-Dec-13 21:20:11 :: [i586] #100 linuxcnc.git 2.7.14-alt3: build FAILED
cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h: cpp failed
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/canon.hh:17:10: fatal error: vector: No such file or directory
17 | #include <vector>
--
from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/gomath.h:23:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
--
from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/inihal.hh:22:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/inihal.hh:22:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags
130 | #error HAL needs RTAPI/ULAPI, check makefile and flags
--
In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_io.h:19:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_io.h:24:10: fatal error: sys/io.h: No such file or directory
24 | #include <sys/io.h>
--
In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_pci.h:41:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
--
from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genserkins.h:36:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genserkins.h:37:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags
130 | #error HAL needs RTAPI/ULAPI, check makefile and flags
--
In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_list.h:35:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
2019-Dec-13 21:30:44 :: [aarch64] linuxcnc.git 2.7.14-alt3: remote: build failed
2019-Dec-13 21:30:44 :: [aarch64] #100 linuxcnc.git 2.7.14-alt3: build FAILED
2019-Dec-13 21:19:54 :: [x86_64] build FAILED
2019-Dec-13 21:20:11 :: [i586] build FAILED
2019-Dec-13 21:30:44 :: [aarch64] build FAILED
2019-Dec-13 21:30:44 :: task #242910 for sisyphus FAILED
reply other threads:[~2019-12-13 21:30 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191213213044.GA24927@gyle.altlinux.org \
--to=girar-builder@altlinux.org \
--cc=darktemplar@altlinux.org \
--cc=girar-builder-sisyphus@altlinux.org \
--cc=sisyphus-incominger@lists.altlinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux Girar Builder robot reports
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus-incominger/0 sisyphus-incominger/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus-incominger sisyphus-incominger/ http://lore.altlinux.org/sisyphus-incominger \
sisyphus-incominger@lists.altlinux.org sisyphus-incominger@lists.altlinux.ru sisyphus-incominger@lists.altlinux.com
public-inbox-index sisyphus-incominger
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-incominger
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git