From: Girar Builder pender robot <girar-builder@altlinux.org>
To: Andrey Cherepanov <cas@altlinux.org>
Cc: sisyphus-incominger@lists.altlinux.org, girar-builder-p9@altlinux.org
Subject: [#240329] p9 DONE (try 3) hplip.git=3.19.11-alt1 epson-inkjet-printer-escpr.git=1.7.5-alt1 ...
Date: Thu, 14 Nov 2019 21:28:48 +0000
Message-ID: <20191114212848.GA18547@gyle.altlinux.org> (raw)
http://git.altlinux.org/tasks/archive/done/_234/240329/logs/events.3.1.log
2019-Nov-14 20:32:44 :: task #240329 for p9 resumed by ldv:
#100 build 3.19.11-alt1 from /gears/h/hplip.git fetched at 2019-Nov-06 13:10:16
#200 build 1.7.5-alt1 from /gears/e/epson-inkjet-printer-escpr.git fetched at 2019-Nov-06 13:10:35
#300 build 1.1.2-alt1 from /gears/e/epson-inkjet-printer-escpr2.git fetched at 2019-Nov-06 13:10:39
#400 build 3.61.0-alt1 from /gears/i/imagescan.git fetched at 2019-Nov-06 13:11:02
#500 delete python-module-theano
2019-Nov-14 20:33:02 :: created build repo
2019-Nov-14 20:33:04 :: [aarch64] #100 hplip.git 3.19.11-alt1: build start
2019-Nov-14 20:33:04 :: [x86_64] #100 hplip.git 3.19.11-alt1: build start
2019-Nov-14 20:33:04 :: [i586] #100 hplip.git 3.19.11-alt1: build start
2019-Nov-14 20:33:04 :: [ppc64le] #100 hplip.git 3.19.11-alt1: build start
2019-Nov-14 20:39:10 :: [x86_64] #100 hplip.git 3.19.11-alt1: build OK
2019-Nov-14 20:39:10 :: [x86_64] #200 epson-inkjet-printer-escpr.git 1.7.5-alt1: build start
2019-Nov-14 20:39:53 :: [x86_64] #200 epson-inkjet-printer-escpr.git 1.7.5-alt1: build OK
2019-Nov-14 20:39:53 :: [x86_64] #300 epson-inkjet-printer-escpr2.git 1.1.2-alt1: build start
2019-Nov-14 20:40:05 :: [i586] #100 hplip.git 3.19.11-alt1: build OK
2019-Nov-14 20:40:05 :: [i586] #200 epson-inkjet-printer-escpr.git 1.7.5-alt1: build start
2019-Nov-14 20:40:25 :: [x86_64] #300 epson-inkjet-printer-escpr2.git 1.1.2-alt1: build OK
2019-Nov-14 20:40:25 :: [x86_64] #400 imagescan.git 3.61.0-alt1: build start
2019-Nov-14 20:40:49 :: [i586] #200 epson-inkjet-printer-escpr.git 1.7.5-alt1: build OK
2019-Nov-14 20:40:50 :: [i586] #300 epson-inkjet-printer-escpr2.git 1.1.2-alt1: build start
2019-Nov-14 20:41:23 :: [i586] #300 epson-inkjet-printer-escpr2.git 1.1.2-alt1: build OK
2019-Nov-14 20:41:23 :: [i586] #400 imagescan.git 3.61.0-alt1: build start
2019-Nov-14 20:42:29 :: [ppc64le] #100 hplip.git 3.19.11-alt1: build OK
2019-Nov-14 20:42:29 :: [ppc64le] #200 epson-inkjet-printer-escpr.git 1.7.5-alt1: build start
2019-Nov-14 20:43:25 :: [ppc64le] #200 epson-inkjet-printer-escpr.git 1.7.5-alt1: build OK
2019-Nov-14 20:43:25 :: [ppc64le] #300 epson-inkjet-printer-escpr2.git 1.1.2-alt1: build start
2019-Nov-14 20:43:38 :: [ppc64le] #300 epson-inkjet-printer-escpr2.git 1.1.2-alt1: build SKIPPED
2019-Nov-14 20:43:38 :: [ppc64le] #400 imagescan.git 3.61.0-alt1: build start
2019-Nov-14 20:43:39 :: [x86_64] #400 imagescan.git 3.61.0-alt1: build OK
2019-Nov-14 20:45:27 :: [i586] #400 imagescan.git 3.61.0-alt1: build OK
2019-Nov-14 20:47:57 :: [ppc64le] #400 imagescan.git 3.61.0-alt1: build OK
2019-Nov-14 20:55:12 :: [aarch64] #100 hplip.git 3.19.11-alt1: build OK
2019-Nov-14 20:55:12 :: [aarch64] #200 epson-inkjet-printer-escpr.git 1.7.5-alt1: build start
2019-Nov-14 20:58:16 :: [aarch64] #200 epson-inkjet-printer-escpr.git 1.7.5-alt1: build OK
2019-Nov-14 20:58:16 :: [aarch64] #300 epson-inkjet-printer-escpr2.git 1.1.2-alt1: build start
2019-Nov-14 21:00:46 :: [aarch64] #300 epson-inkjet-printer-escpr2.git 1.1.2-alt1: build OK
2019-Nov-14 21:00:46 :: [aarch64] #400 imagescan.git 3.61.0-alt1: build start
2019-Nov-14 21:15:34 :: [aarch64] #400 imagescan.git 3.61.0-alt1: build OK
2019-Nov-14 21:16:20 :: #100: hplip.git 3.19.11-alt1: build check OK
2019-Nov-14 21:16:27 :: #200: epson-inkjet-printer-escpr.git 1.7.5-alt1: build check OK
2019-Nov-14 21:16:33 :: #300: epson-inkjet-printer-escpr2.git 1.1.2-alt1: build check OK
2019-Nov-14 21:16:46 :: #400: imagescan.git 3.61.0-alt1: build check OK
2019-Nov-14 21:16:46 :: build check OK
2019-Nov-14 21:17:37 :: noarch check OK
2019-Nov-14 21:17:39 :: plan: src +4 -5 =17818, aarch64 +16 -16 =29706, i586 +16 -16 =31957, noarch +7 -12 =18608, ppc64le +15 -15 =30056, x86_64 +16 -16 =32240
2019-Nov-14 21:17:39 :: version check OK
2019-Nov-14 21:17:39 :: hplip: closes bugs: 37289
2019-Nov-14 21:18:33 :: generated apt indices
2019-Nov-14 21:18:33 :: created next repo
2019-Nov-14 21:18:54 :: dependencies check OK
2019-Nov-14 21:19:26 :: [x86_64 i586 aarch64 ppc64le] ELF symbols check OK
x86_64: epson-inkjet-printer-escpr=1.7.5-alt1 post-install unowned files:
/usr/lib/cups
/usr/lib/cups/filter
/usr/share/cups
/usr/share/cups/model
2019-Nov-14 21:19:40 :: [x86_64] #200 epson-inkjet-printer-escpr: install check OK
i586: epson-inkjet-printer-escpr=1.7.5-alt1 post-install unowned files:
/usr/lib/cups
/usr/lib/cups/filter
/usr/share/cups
/usr/share/cups/model
2019-Nov-14 21:19:41 :: [i586] #200 epson-inkjet-printer-escpr: install check OK
x86_64: epson-inkjet-printer-escpr2=1.1.2-alt1 post-install unowned files:
/usr/lib/cups
/usr/lib/cups/filter
/usr/share/cups
/usr/share/cups/model
2019-Nov-14 21:19:45 :: [x86_64] #300 epson-inkjet-printer-escpr2: install check OK
i586: epson-inkjet-printer-escpr2=1.1.2-alt1 post-install unowned files:
/usr/lib/cups
/usr/lib/cups/filter
/usr/share/cups
/usr/share/cups/model
2019-Nov-14 21:19:46 :: [i586] #300 epson-inkjet-printer-escpr2: install check OK
2019-Nov-14 21:20:01 :: [x86_64] #100 hplip: install check OK
2019-Nov-14 21:20:04 :: [i586] #100 hplip: install check OK
2019-Nov-14 21:20:14 :: [x86_64] #100 hplip-PPDs: install check OK
2019-Nov-14 21:20:18 :: [i586] #100 hplip-PPDs: install check OK
2019-Nov-14 21:20:20 :: [x86_64] #100 hplip-common: install check OK
2019-Nov-14 21:20:24 :: [i586] #100 hplip-common: install check OK
2019-Nov-14 21:20:30 :: [x86_64] #100 hplip-common-debuginfo: install check OK
2019-Nov-14 21:20:33 :: [i586] #100 hplip-common-debuginfo: install check OK
2019-Nov-14 21:20:51 :: [x86_64] #100 hplip-debuginfo: install check OK
2019-Nov-14 21:20:56 :: [i586] #100 hplip-debuginfo: install check OK
2019-Nov-14 21:21:22 :: [x86_64] #100 hplip-gui: install check OK
2019-Nov-14 21:21:31 :: [i586] #100 hplip-gui: install check OK
2019-Nov-14 21:21:53 :: [x86_64] #100 hplip-gui-autostart: install check OK
2019-Nov-14 21:22:05 :: [x86_64] #100 hplip-hpcups: install check OK
2019-Nov-14 21:22:10 :: [i586] #100 hplip-gui-autostart: install check OK
x86_64: hplip-hpcups-PPDs=1:3.19.11-alt1 post-install unowned files:
/usr/share/ppd/HP
2019-Nov-14 21:22:17 :: [x86_64] #100 hplip-hpcups-PPDs: install check OK
2019-Nov-14 21:22:22 :: [i586] #100 hplip-hpcups: install check OK
2019-Nov-14 21:22:32 :: [x86_64] #100 hplip-hpcups-debuginfo: install check OK
i586: hplip-hpcups-PPDs=1:3.19.11-alt1 post-install unowned files:
/usr/share/ppd/HP
2019-Nov-14 21:22:35 :: [i586] #100 hplip-hpcups-PPDs: install check OK
x86_64: hplip-hpijs=1:3.19.11-alt1 post-install unowned files:
/usr/share/cups
/usr/share/cups/drv
2019-Nov-14 21:22:41 :: [x86_64] #100 hplip-hpijs: install check OK
x86_64: hplip-hpijs-PPDs=1:3.19.11-alt1 post-install unowned files:
/usr/share/ppd
/usr/share/ppd/HP
2019-Nov-14 21:22:50 :: [x86_64] #100 hplip-hpijs-PPDs: install check OK
2019-Nov-14 21:22:51 :: [i586] #100 hplip-hpcups-debuginfo: install check OK
i586: hplip-hpijs=1:3.19.11-alt1 post-install unowned files:
/usr/share/cups
/usr/share/cups/drv
2019-Nov-14 21:23:02 :: [i586] #100 hplip-hpijs: install check OK
2019-Nov-14 21:23:03 :: [x86_64] #100 hplip-hpijs-debuginfo: install check OK
x86_64: hplip-ps-PPDs=1:3.19.11-alt1 post-install unowned files:
/usr/share/ppd
/usr/share/ppd/HP
2019-Nov-14 21:23:09 :: [x86_64] #100 hplip-ps-PPDs: install check OK
i586: hplip-hpijs-PPDs=1:3.19.11-alt1 post-install unowned files:
/usr/share/ppd
/usr/share/ppd/HP
2019-Nov-14 21:23:11 :: [i586] #100 hplip-hpijs-PPDs: install check OK
2019-Nov-14 21:23:25 :: [i586] #100 hplip-hpijs-debuginfo: install check OK
i586: hplip-ps-PPDs=1:3.19.11-alt1 post-install unowned files:
/usr/share/ppd
/usr/share/ppd/HP
2019-Nov-14 21:23:30 :: [i586] #100 hplip-ps-PPDs: install check OK
2019-Nov-14 21:23:39 :: [x86_64] #100 hplip-recommends: install check OK
x86_64: hplip-sane=1:3.19.11-alt1 post-install unowned files:
/usr/share/hal
/usr/share/hal/fdi
/usr/share/hal/fdi/preprobe
/usr/share/hal/fdi/preprobe/10osvendor
2019-Nov-14 21:23:46 :: [x86_64] #100 hplip-sane: install check OK
2019-Nov-14 21:23:55 :: [x86_64] #100 hplip-sane-debuginfo: install check OK
2019-Nov-14 21:24:04 :: [i586] #100 hplip-recommends: install check OK
x86_64: imagescan=3.61.0-alt1 post-install unowned files:
/etc/utsushi
2019-Nov-14 21:24:05 :: [x86_64] #400 imagescan: install check OK
i586: hplip-sane=1:3.19.11-alt1 post-install unowned files:
/usr/share/hal
/usr/share/hal/fdi
/usr/share/hal/fdi/preprobe
/usr/share/hal/fdi/preprobe/10osvendor
2019-Nov-14 21:24:10 :: [i586] #100 hplip-sane: install check OK
2019-Nov-14 21:24:20 :: [i586] #100 hplip-sane-debuginfo: install check OK
2019-Nov-14 21:24:28 :: [x86_64] #400 imagescan-debuginfo: install check OK
i586: imagescan=3.61.0-alt1 post-install unowned files:
/etc/utsushi
2019-Nov-14 21:24:31 :: [i586] #400 imagescan: install check OK
x86_64: imagescan-sane=3.61.0-alt1 post-install unowned files:
/etc/sane.d
/etc/sane.d/dll.d
/usr/lib64/sane
/usr/lib64/utsushi
/usr/share/utsushi
2019-Nov-14 21:24:39 :: [x86_64] #400 imagescan-sane: install check OK
2019-Nov-14 21:24:55 :: [i586] #400 imagescan-debuginfo: install check OK
2019-Nov-14 21:24:59 :: [x86_64] #400 imagescan-sane-debuginfo: install check OK
i586: imagescan-sane=3.61.0-alt1 post-install unowned files:
/etc/sane.d
/etc/sane.d/dll.d
/usr/lib/sane
/usr/share/utsushi
2019-Nov-14 21:25:07 :: [i586] #400 imagescan-sane: install check OK
2019-Nov-14 21:25:30 :: [i586] #400 imagescan-sane-debuginfo: install check OK
2019-Nov-14 21:25:31 :: [x86_64-i586] plan: #7 +7 -7 =10630
2019-Nov-14 21:26:01 :: [x86_64-i586] arepo build OK
2019-Nov-14 21:26:17 :: [x86_64-i586] generated apt indices
2019-Nov-14 21:26:17 :: [x86_64-i586] created next repo
2019-Nov-14 21:26:25 :: [x86_64-i586] dependencies check OK
2019-Nov-14 21:26:30 :: gears inheritance check OK
2019-Nov-14 21:26:30 :: srpm inheritance check OK
girar-check-perms: access to @maint ALLOWED for cas: member of approved group
girar-check-perms: access to @tester ALLOWED for sotor: member of approved group
check-subtask-perms: #100: hplip: allowed for cas, approved by sotor
girar-check-perms: access to @maint ALLOWED for cas: member of approved group
girar-check-perms: access to @tester ALLOWED for sotor: member of approved group
check-subtask-perms: #200: epson-inkjet-printer-escpr: allowed for cas, approved by sotor
girar-check-perms: access to @maint ALLOWED for cas: member of approved group
girar-check-perms: access to @tester ALLOWED for sotor: member of approved group
check-subtask-perms: #300: epson-inkjet-printer-escpr2: allowed for cas, approved by sotor
girar-check-perms: access to @maint ALLOWED for cas: member of approved group
girar-check-perms: access to @tester ALLOWED for sotor: member of approved group
check-subtask-perms: #400: imagescan: allowed for cas, approved by sotor
girar-check-perms: access to @maint ALLOWED for cas: member of approved group
girar-check-perms: access to @tester ALLOWED for sotor: member of approved group
check-subtask-perms: #500: python-module-theano: allowed for cas, approved by sotor
2019-Nov-14 21:26:37 :: acl check OK
2019-Nov-14 21:27:06 :: created contents_index files
2019-Nov-14 21:27:16 :: created hash files: aarch64 i586 noarch ppc64le src x86_64-i586 x86_64
2019-Nov-14 21:27:17 :: task #240329 for p9 TESTED
2019-Nov-14 21:27:18 :: task is ready for commit
2019-Nov-14 21:27:24 :: repo clone OK
2019-Nov-14 21:27:26 :: packages update OK
2019-Nov-14 21:27:33 :: [x86_64 i586 aarch64 ppc64le noarch] update OK
2019-Nov-14 21:27:33 :: [x86_64-i586] update OK
2019-Nov-14 21:27:33 :: repo update OK
2019-Nov-14 21:27:54 :: repo save OK
2019-Nov-14 21:27:54 :: src index update OK
2019-Nov-14 21:28:00 :: updated /gears/e/epson-inkjet-printer-escpr.git branch `p9'
2019-Nov-14 21:28:01 :: updated /gears/e/epson-inkjet-printer-escpr2.git branch `p9'
2019-Nov-14 21:28:02 :: updated /gears/h/hplip.git branch `p9'
2019-Nov-14 21:28:04 :: updated /gears/i/imagescan.git branch `p9'
2019-Nov-14 21:28:05 :: saved /gears/p/python-module-theano.git branch `p9' as `old/p9-task240329'
2019-Nov-14 21:28:06 :: removed /gears/p/python-module-theano.git branch `p9'
2019-Nov-14 21:28:47 :: gears update OK
2019-Nov-14 21:28:48 :: task #240329 for p9 DONE
reply other threads:[~2019-11-14 21:28 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191114212848.GA18547@gyle.altlinux.org \
--to=girar-builder@altlinux.org \
--cc=cas@altlinux.org \
--cc=girar-builder-p9@altlinux.org \
--cc=sisyphus-incominger@lists.altlinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux Girar Builder robot reports
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus-incominger/0 sisyphus-incominger/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus-incominger sisyphus-incominger/ http://lore.altlinux.org/sisyphus-incominger \
sisyphus-incominger@lists.altlinux.org sisyphus-incominger@lists.altlinux.ru sisyphus-incominger@lists.altlinux.com
public-inbox-index sisyphus-incominger
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-incominger
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git