From: ALT beekeeper <hiver@altlinux.org>
To: sisyphus-cybertalk@lists.altlinux.org
Subject: [cyber] I: Sisyphus-20250911 x86_64 beehive_status: +26 -14 (215)
Date: Thu, 11 Sep 2025 06:41:35 +0000
Message-ID: <aMJvH+G0qxovUzTJ@beehive.mskdc.altlinux.org> (raw)
26 NEW error logs
binwalk3-3.1.0-alt1
test src/binwalk.rs - binwalk::Binwalk::analyze (line 639) ... ok
test src/binwalk.rs - binwalk::Binwalk::extract (line 537) ... FAILED
test src/structures.rs - structures (line 41) - compile ... ok
--
thread 'main' panicked at src/binwalk.rs:18:60:
Unable to read file: Os { code: 2, kind: NotFound, message: "No such file or directory" }
stack backtrace:
--
src/binwalk.rs - binwalk::Binwalk::extract (line 537)
test result: FAILED. 28 passed; 1 failed; 3 ignored; 0 measured; 0 filtered out;
finished in 0.71s
error: doctest failed, to rerun pass `--doc`
cmake-4.0.3-alt1
/usr/src/RPM/BUILD/cmake-4.0.3/Source/LexerParser/cmFortranParserTokens.h:57: note:
name 'EOSTMT' differs from name 'exp_PLUS' defined in another translation unit
57 | EOSTMT = 258, /* EOSTMT */
/usr/src/RPM/BUILD/cmake-4.0.3/Source/LexerParser/cmExprParserTokens.h:57: note:
mismatching definition
57 | exp_PLUS = 258, /* exp_PLUS */
/usr/bin/c++ -pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto
-fPIC -DPIC -Wl,--dependency-file=CMakeFiles/ccmake.dir/link.d
CMakeFiles/ccmake.dir/ccmake.cxx.o CMakeFiles/ccmake.dir/cmCursesBoolWidget.cxx.o
CMakeFiles/ccmake.dir/cmCursesCacheEntryComposite.cxx.o
CMakeFiles/ccmake.dir/cmCursesColor.cxx.o CMakeFiles/ccmake.dir/cmCursesDummyWidget.cxx.o
CMakeFiles/ccmake.dir/cmCursesFilePathWidget.cxx.o CMakeFiles/ccmake.dir/cmCursesForm.cxx.o
CMakeFiles/ccmake.dir/cmCursesLabelWidget.cxx.o
CMakeFiles/ccmake.dir/cmCursesLongMessageForm.cxx.o
CMakeFiles/ccmake.dir/cmCursesMainForm.cxx.o
CMakeFiles/ccmake.dir/cmCursesOptionsWidget.cxx.o
CMakeFiles/ccmake.dir/cmCursesPathWidget.cxx.o
CMakeFiles/ccmake.dir/cmCursesStringWidget.cxx.o CMakeFiles/ccmake.dir/cmCursesWidget.cxx.o
-o ../../bin/ccmake ../libCMakeLib.a /usr/lib64/libform.so -lncurses
../../Utilities/std/libcmstd.a ../kwsys/libcmsys.a -ldl /usr/lib64/libcurl.so
/usr/lib64/libcurl.so /usr/lib64/libexpat.so /usr/lib64/libarchive.so
/usr/lib64/librhash.so /usr/lib64/libuv.so /usr/lib64/libz.so
../../Utilities/cmllpkgc/libcmllpkgc.a ../../Utilities/cmcppdap/libcmcppdap.a
/usr/lib64/libjsoncpp.so
gmake[2]: Leaving directory '/usr/src/RPM/BUILD/cmake-4.0.3/build'
gmake[1]: Entering directory '/usr/src/RPM/BUILD/cmake-4.0.3/build'
[ 86%] Built target ccmake
gmake[1]: Leaving directory '/usr/src/RPM/BUILD/cmake-4.0.3/build'
gmake: *** [Makefile:166: all] Error 2
dropbear-2025.88-alt1
> self.socket.bind(self.server_address)
E OSError: [Errno 98] Address already in use
/usr/lib64/python3.12/socketserver.py:478: OSError
--
> self.socket.bind(self.server_address)
E OSError: [Errno 98] Address already in use
/usr/lib64/python3.12/socketserver.py:478: OSError
--
[287] Sep 11 06:02:04 Pubkey auth succeeded for 'root' with ecdsa-sha2-nistp256 key
SHA256:Idz4uwTqvDSAgk+EirYSxQSrtgr+0Mqv615UWekjLbk from 127.0.0.1:51356
[288] Sep 11 06:02:04 lastlog_perform_login: Couldn't stat /var/log/lastlog: No such
file or directory
[288] Sep 11 06:02:04 lastlog_openseek: /var/log/lastlog is not a file or directory!
[287] Sep 11 06:02:04 Exit (root) from <127.0.0.1:51356>: Exited normally
[287] Sep 11 06:02:04 syslogin_perform_logout: logout(pts/1) returned an error: No such
file or directory
[291] Sep 11 06:02:04 Child connection from 127.0.0.1:51370
--
[296] Sep 11 06:02:04 Pubkey auth succeeded for 'root' with ecdsa-sha2-nistp256 key
SHA256:Idz4uwTqvDSAgk+EirYSxQSrtgr+0Mqv615UWekjLbk from 127.0.0.1:51384
[297] Sep 11 06:02:04 lastlog_perform_login: Couldn't stat /var/log/lastlog: No such
file or directory
[297] Sep 11 06:02:04 lastlog_openseek: /var/log/lastlog is not a file or directory!
[296] Sep 11 06:02:04 Exit (root) from <127.0.0.1:51384>: Exited normally
[296] Sep 11 06:02:04 syslogin_perform_logout: logout(pts/2) returned an error: No such
file or directory
[300] Sep 11 06:02:05 Child connection from 127.0.0.1:51392
--
[305] Sep 11 06:02:05 Pubkey auth succeeded for 'root' with ecdsa-sha2-nistp256 key
SHA256:Idz4uwTqvDSAgk+EirYSxQSrtgr+0Mqv615UWekjLbk from 127.0.0.1:51406
[306] Sep 11 06:02:05 lastlog_perform_login: Couldn't stat /var/log/lastlog: No such
file or directory
[306] Sep 11 06:02:05 lastlog_openseek: /var/log/lastlog is not a file or directory!
[305] Sep 11 06:02:05 Exit (root) from <127.0.0.1:51406>: Exited normally
[305] Sep 11 06:02:05 syslogin_perform_logout: logout(pts/3) returned an error: No such
file or directory
[309] Sep 11 06:02:05 Child connection from 127.0.0.1:51414
--
[314] Sep 11 06:02:05 Pubkey auth succeeded for 'root' with ecdsa-sha2-nistp256 key
SHA256:Idz4uwTqvDSAgk+EirYSxQSrtgr+0Mqv615UWekjLbk from 127.0.0.1:51420
[315] Sep 11 06:02:05 lastlog_perform_login: Couldn't stat /var/log/lastlog: No such
file or directory
[315] Sep 11 06:02:05 lastlog_openseek: /var/log/lastlog is not a file or directory!
[314] Sep 11 06:02:05 Exit (root) from <127.0.0.1:51420>: Exited normally
[314] Sep 11 06:02:05 syslogin_perform_logout: logout(pts/4) returned an error: No such
file or directory
[318] Sep 11 06:02:05 Child connection from 127.0.0.1:51436
exaile-4.1.4-alt1
po/sv.po:3236: keyword "msg" unknown
po/sv.po:3236:4: syntax error
msgfmt: found 2 fatal errors
freefilesync-14.4-alt1
afs/ftp.cpp: In member function 'std::string
{anonymous}::FtpSession::runSingleFtpCommand(const std::string&, bool)':
afs/ftp.cpp:578:51: error: invalid conversion from 'long int' to 'curl_ftpmethod'
[-fpermissive]
578 | return perform(AfsPath(), true /*isDir*/, CURLFTPMETHOD_NOCWD /*avoid
needless CWDs*/,
gawk-5.1.0.0.213.d04f-alt1
make[3]: Entering directory '/usr/src/RPM/BUILD/gawk-5.1.0.0.213.d04f-alt1/test'
1 TESTS FAILED
make[3]: *** [Makefile:5248: pass-fail] Error 1
glyr-1.0.10-alt1
-- Building Target: release
Package libidn2 was not found in the pkg-config search path.
Perhaps you should add the directory containing `libidn2.pc'
to the PKG_CONFIG_PATH environment variable
Package 'libidn2', required by 'libcurl', not found
Package libidn2 was not found in the pkg-config search path.
Perhaps you should add the directory containing `libidn2.pc'
to the PKG_CONFIG_PATH environment variable
Package 'libidn2', required by 'libcurl', not found
Package libidn2 was not found in the pkg-config search path.
Perhaps you should add the directory containing `libidn2.pc'
to the PKG_CONFIG_PATH environment variable
Package 'libidn2', required by 'libcurl', not found
Package libidn2 was not found in the pkg-config search path.
Perhaps you should add the directory containing `libidn2.pc'
to the PKG_CONFIG_PATH environment variable
Package 'libidn2', required by 'libcurl', not found
-- Found CURL: /usr/lib64/libcurl.so (found version "8.16.0")
--
-- Found gthread-2.0, version 2.84.4
Package libpcre2-8 was not found in the pkg-config search path.
Perhaps you should add the directory containing `libpcre2-8.pc'
to the PKG_CONFIG_PATH environment variable
Package 'libpcre2-8', required by 'glib-2.0', not found
Package libpcre2-8 was not found in the pkg-config search path.
java-1.8.0-openjdk-0:1.8.0.462.b08-alt1
RPM build errors:
Unparseable macro: % by %%)
Macro %z not found
ignored self-provides: java-1.8.0-openjdk = 0:1.8.0.462.b08-alt1
ignored self-provides: java-1.8.0-openjdk-headless = 0:1.8.0.462.b08-alt1
ignored self-provides: java-1.8.0-openjdk-devel = 0:1.8.0.462.b08
ignored self-provides: java-1.8.0-openjdk-demo = 0:1.8.0.462.b08-alt1
ignored self-provides: java-1.8.0-openjdk-src = 0:1.8.0.462.b08-alt1
ignored self-provides: java-1.8.0-openjdk-javadoc = 0:1.8.0.462.b08-alt1
Unparseable macro: %.*}"
kodi-21.2-alt5
from /usr/src/RPM/BUILD/kodi-21.2/xbmc/filesystem/CurlFile.cpp:34:
/usr/src/RPM/BUILD/kodi-21.2/xbmc/filesystem/CurlFile.cpp:48:5: error: invalid conversion
from 'long int' to 'curl_proxytype' [-fpermissive]
48 | CURLPROXY_HTTP, CURLPROXY_SOCKS4, CURLPROXY_SOCKS4A,
| long int
/usr/src/RPM/BUILD/kodi-21.2/xbmc/filesystem/CurlFile.cpp:48:23: error: invalid conversion
from 'long int' to 'curl_proxytype' [-fpermissive]
48 | CURLPROXY_HTTP, CURLPROXY_SOCKS4, CURLPROXY_SOCKS4A,
| long int
/usr/src/RPM/BUILD/kodi-21.2/xbmc/filesystem/CurlFile.cpp:48:50: error: invalid conversion
from 'long int' to 'curl_proxytype' [-fpermissive]
48 | CURLPROXY_HTTP, CURLPROXY_SOCKS4, CURLPROXY_SOCKS4A,
| long int
/usr/src/RPM/BUILD/kodi-21.2/xbmc/filesystem/CurlFile.cpp:49:5: error: invalid conversion
from 'long int' to 'curl_proxytype' [-fpermissive]
49 | CURLPROXY_SOCKS5, CURLPROXY_SOCKS5_HOSTNAME, CURLPROXY_HTTPS,
| long int
/usr/src/RPM/BUILD/kodi-21.2/xbmc/filesystem/CurlFile.cpp:49:23: error: invalid conversion
from 'long int' to 'curl_proxytype' [-fpermissive]
49 | CURLPROXY_SOCKS5, CURLPROXY_SOCKS5_HOSTNAME, CURLPROXY_HTTPS,
| long int
/usr/src/RPM/BUILD/kodi-21.2/xbmc/filesystem/CurlFile.cpp:49:50: error: invalid conversion
from 'long int' to 'curl_proxytype' [-fpermissive]
49 | CURLPROXY_SOCKS5, CURLPROXY_SOCKS5_HOSTNAME, CURLPROXY_HTTPS,
kopia-0.21.1-alt1
ok github.com/kopia/kopia/tests/tools/fswalker 0.049s
? github.com/kopia/kopia/tests/tools/fswalker/protofile [no test files]
ok github.com/kopia/kopia/tests/tools/fswalker/reporter 0.021s
ok github.com/kopia/kopia/tests/tools/fswalker/walker 0.017s
? github.com/kopia/kopia/tests/tools/kopiaclient [no test files]
ok github.com/kopia/kopia/tests/tools/kopiarunner 0.011s
ok github.com/kopia/kopia/tools/cli2md 0.055s
? github.com/kopia/kopia/tools/gettool [no test files]
? github.com/kopia/kopia/tools/gettool/autodownload [no test files]
FAIL
libbotan-2.19.1-alt2.5
tls_stream_integration:
Server ran 47 tests 2 FAILED
Failure 1: Server: timeout in accept
--
ZFEC encoding/decoding ran 10449 tests in 13.43 msec all ok
Tests complete ran 2802751 tests in 54.78 sec 2 tests failed
libgbinder-1.1.42-alt0.1
# slow test /servicemanager_hidl/list executed in 2.20 secs
ERROR:../common/test_main.c:55:test_timeout_expired: assertion failed: (!"TIMEOUT")
not ok /servicemanager_hidl/notify - ERROR:../common/test_main.c:55:test_timeout_expired:
assertion failed: (!"TIMEOUT")
Bail out!
libmicrohttpd-1.0.2-alt1
PASS: test_get_sendfile
FAIL: test_get_close
FAIL: test_get_close10
PASS: test_get_keep_alive
--
# SKIP: 0
# XFAIL: 0
# FAIL: 2
# XPASS: 0
# ERROR: 0
See src/testcurl/test-suite.log
marss-riscv-4.1a-alt2
src/Memory.h:281:10: required from here
281 | void tick()
src/Controller.h:359:31: warning: comparison of integer expressions of different
signedness: 'unsigned int' and 'int' [-Wsign-compare]
359 | if (writeq.size() > int(wr_high_watermark * writeq.max) || readq.size()
== 0)
src/Controller.h:364:31: warning: comparison of integer expressions of different
signedness: 'unsigned int' and 'int' [-Wsign-compare]
364 | if (writeq.size() < int(wr_low_watermark * writeq.max) && readq.size()
!= 0)
make[1]: Leaving directory '/usr/src/RPM/BUILD/marss-riscv-4.1a/src/ramulator'
make[1]: Entering directory '/usr/src/RPM/BUILD/marss-riscv-4.1a/src/ramulator'
g++ -O2 -std=c++11 -g -Wall -shared -Wl,-soname,libramulator.so -o libramulator.so
obj/ALDRAM.po obj/Cache.po obj/Config.po obj/Controller.po obj/DDR3.po obj/DDR4.po
obj/DSARP.po obj/GDDR5.po obj/HBM.po obj/LPDDR3.po obj/LPDDR4.po obj/MemoryFactory.po
obj/PCM.po obj/Processor.po obj/Refresh.po obj/SALP.po obj/STTMRAM.po obj/StatType.po
obj/TLDRAM.po obj/WideIO.po obj/WideIO2.po obj/Gem5Wrapper.po
make[1]: Leaving directory '/usr/src/RPM/BUILD/marss-riscv-4.1a/src/ramulator'
newsboat-2.40-alt1
src/utils.cpp: In function 'curl_proxytype newsboat::utils::get_proxy_type(const
std::string&)':
src/utils.cpp:650:24: error: invalid conversion from 'long int' to 'curl_proxytype'
[-fpermissive]
650 | return CURLPROXY_HTTP;
| long int
src/utils.cpp:653:24: error: invalid conversion from 'long int' to 'curl_proxytype'
[-fpermissive]
653 | return CURLPROXY_SOCKS4;
| long int
src/utils.cpp:656:24: error: invalid conversion from 'long int' to 'curl_proxytype'
[-fpermissive]
656 | return CURLPROXY_SOCKS5;
| long int
src/utils.cpp:659:24: error: invalid conversion from 'long int' to 'curl_proxytype'
[-fpermissive]
659 | return CURLPROXY_SOCKS5_HOSTNAME;
| long int
src/utils.cpp:663:24: error: invalid conversion from 'long int' to 'curl_proxytype'
[-fpermissive]
663 | return CURLPROXY_SOCKS4A;
| long int
src/utils.cpp:672:16: error: invalid conversion from 'long int' to 'curl_proxytype'
[-fpermissive]
672 | return CURLPROXY_HTTP;
--
from newsboat.cpp:15:
rss/parser.h:26:45: error: invalid conversion from 'long int' to 'curl_proxytype'
[-fpermissive]
26 | curl_proxytype proxy_type = CURLPROXY_HTTP,
opendht-3.4.0-alt1
- Actual : 255
0% tests passed, 1 tests failed out of 1
Total Test time (real) = 78.11 sec
The following tests FAILED:
1 - TEST (Failed)
plank-0.11.89-alt2
OK
FAIL: ./tests
make[4]: *** [Makefile:1095: check-local] Error 1
prometheus-simpleclient-java-0.12.0-alt1_4jpp11
[ERROR] io.prometheus.client.HistogramTest.testTimeWithExemplar -- Time elapsed: 0.058
s <<< FAILURE!
java.lang.AssertionError: expected:<0.02> but was:<0.021122363>
at org.junit.Assert.fail(Assert.java:89)
protobuf-3.25.5-alt6
[ERROR] -> [Help 1]
[ERROR]
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR]
[ERROR] For more information about the errors and possible solutions, please read the
following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/MojoFailureException
[ERROR]
[ERROR] After correcting the problems, you can resume the build with the command
[ERROR] mvn <args> -rf :protobuf-java
python3-module-encore-0.8.0-alt2.1
> self.assertGreaterEqual(value.modified, test_start)
E AssertionError: 1757567797.9999359 not greater than or equal to 1757567798
encore/storage/tests/abstract_test.py:389: AssertionError
--
=========================== short test summary info ============================
FAILED
encore/storage/tests/filesystem_store_test.py::FileSystemStoreWriteTest::test_set_metadata
============ 1 failed, 449 passed, 8 skipped, 77 warnings in 47.47s ============
INFO : Command's result: FAILURE
INFO : Command's error: Command '['python3', '-m', 'pytest', '-v']' returned non-zero
exit status 1.
python3-module-python-lsp-server-1.13.0-alt1
SKIPPED [2] test/test_uris.py:48: Windows only
FAILED test/test_python_lsp.py::test_concurrent_ws_requests - AssertionError:...
============= 1 failed, 195 passed, 9 skipped in 137.16s (0:02:17) =============
INFO : Command's result: FAILURE
INFO : Command's error: Command '['python3', '-m', 'pytest', '-ra',
'-o=addopts=-Wignore', 'test']' returned non-zero exit status 1.
error: Bad exit status from /usr/src/tmp/rpm-tmp.1714 (%check)
python3-module-qtsass-0.3.0-alt3
tests/test_functions.py::TestQLinearGradientFunc::test_rgba PASSED [ 89%]
tests/test_watchers.py::test_watchers[PollingWatcher] FAILED [ 91%]
tests/test_watchers.py::test_watchers[None] PASSED [ 94%]
--
SKIPPED [1] tests/test_watchers.py:100: Fails on linux
FAILED tests/test_watchers.py::test_watchers[PollingWatcher] - assert 1 == 2
=================== 1 failed, 35 passed, 1 skipped in 10.55s ===================
rng-tools-6.17-alt1.1
PASS: rngtestzero.sh
FAIL: rngtestjitter.sh
Testsuite summary for rng-tools 6.17
--
# SKIP: 0
# XFAIL: 0
# FAIL: 1
# XPASS: 0
# ERROR: 0
See tests/test-suite.log
tinyemu-20191221-alt1
from fs_wget.c:42:
/usr/include/curl/multi.h:423:23: error: expected identifier or '(' before '__extension__'
423 | CURL_EXTERN CURLMcode curl_multi_setopt(CURLM *multi_handle,
/usr/include/curl/multi.h:423:23: error: expected identifier or '(' before ')' token
423 | CURL_EXTERN CURLMcode curl_multi_setopt(CURLM *multi_handle,
tmux-3.5a-alt1
sh has-session-return.sh
sh if-shell-TERM.sh
sh if-shell-error.sh
sh if-shell-nested.sh
sh input-keys.sh
[FAIL] M-C-j -> ^[ (Got: )
[FAIL] M-C-u -> ^[^U (Got: )
[FAIL] M-BSpace -> ^[^? (Got: )
make: *** [Makefile:9: input-keys.sh] Error 1
make: Leaving directory '/usr/src/RPM/BUILD/tmux-3.5a/regress'
virtualbox-7.1.12a-alt1
/usr/src/RPM/BUILD/VirtualBox-7.1.12a_OSE/src/VBox/Runtime/generic/http-curl.cpp:
In function 'int rtHttpUpdateAutomaticProxyDisable(PRTHTTPINTERNAL)':
/usr/src/RPM/BUILD/VirtualBox-7.1.12a_OSE/src/VBox/Runtime/generic/http-curl.cpp:702:27:
error: invalid conversion from 'long int' to 'curl_proxytype' [-fpermissive]
702 | pThis->enmProxyType = CURLPROXY_HTTP;
--
/usr/src/RPM/BUILD/VirtualBox-7.1.12a_OSE/src/VBox/Runtime/generic/http-curl.cpp:
In function 'int rtHttpConfigureProxyFromUrl(PRTHTTPINTERNAL, const char*)':
/usr/src/RPM/BUILD/VirtualBox-7.1.12a_OSE/src/VBox/Runtime/generic/http-curl.cpp:877:33:
error: invalid conversion from 'long int' to 'curl_proxytype' [-fpermissive]
877 | enmProxyType = CURLPROXY_HTTP;
| long int
/usr/src/RPM/BUILD/VirtualBox-7.1.12a_OSE/src/VBox/Runtime/generic/http-curl.cpp:885:33:
error: invalid conversion from 'long int' to 'curl_proxytype' [-fpermissive]
885 | enmProxyType = CURLPROXY_HTTPS;
| long int
/usr/src/RPM/BUILD/VirtualBox-7.1.12a_OSE/src/VBox/Runtime/generic/http-curl.cpp:893:32:
error: invalid conversion from 'long int' to 'curl_proxytype' [-fpermissive]
893 | enmProxyType = CURLPROXY_SOCKS4;
| long int
/usr/src/RPM/BUILD/VirtualBox-7.1.12a_OSE/src/VBox/Runtime/generic/http-curl.cpp:895:32:
error: invalid conversion from 'long int' to 'curl_proxytype' [-fpermissive]
895 | enmProxyType = CURLPROXY_SOCKS4A;
| long int
/usr/src/RPM/BUILD/VirtualBox-7.1.12a_OSE/src/VBox/Runtime/generic/http-curl.cpp:897:32:
error: invalid conversion from 'long int' to 'curl_proxytype' [-fpermissive]
897 | enmProxyType = CURLPROXY_SOCKS5;
| long int
/usr/src/RPM/BUILD/VirtualBox-7.1.12a_OSE/src/VBox/Runtime/generic/http-curl.cpp:899:32:
error: invalid conversion from 'long int' to 'curl_proxytype' [-fpermissive]
899 | enmProxyType = CURLPROXY_SOCKS5_HOSTNAME;
| long int
/usr/src/RPM/BUILD/VirtualBox-7.1.12a_OSE/src/VBox/Runtime/generic/http-curl.cpp:903:32:
error: invalid conversion from 'long int' to 'curl_proxytype' [-fpermissive]
903 | enmProxyType = CURLPROXY_HTTP;
--
/usr/src/RPM/BUILD/VirtualBox-7.1.12a_OSE/src/VBox/Runtime/generic/http-curl.cpp:
In function 'int RTHttpSetProxy(RTHTTP, const char*, uint32_t, const char*, const char*)':
/usr/src/RPM/BUILD/VirtualBox-7.1.12a_OSE/src/VBox/Runtime/generic/http-curl.cpp:2097:43:
error: invalid conversion from 'long int' to 'curl_proxytype' [-fpermissive]
2097 | return rtHttpUpdateProxyConfig(pThis, CURLPROXY_HTTP, pcszProxy, uPort
? uPort : 1080, pcszProxyUser, pcszProxyPwd);
14 error logs REMOVED from the list
ocaml-5.3.0-alt2
openmotif-2.3.8-alt2
perl-Net-SIP-0.838-alt1
python3-module-PyGreSQL-6.1.0-alt1.1
python3-module-cheroot-10.0.1-alt4
python3-module-pyshark-0.6-alt2
python3-module-schemathesis-4.1.4-alt1
python3-module-setuptools-1:80.9.0-alt1
python3-module-syrupy-4.9.1-alt1
python3-module-vcrpy-7.0.0-alt1
snapshot-48.0.1-alt1
squeekboard-1.43.1-alt1
srt-1.5.4-alt2
valkey-8.1.3-alt1
Total 215 error logs.
reply other threads:[~2025-09-11 6:41 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aMJvH+G0qxovUzTJ@beehive.mskdc.altlinux.org \
--to=hiver@altlinux.org \
--cc=devel@lists.altlinux.org \
--cc=sisyphus-cybertalk@lists.altlinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux Sisyphus cybertalk
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus-cybertalk/0 sisyphus-cybertalk/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus-cybertalk sisyphus-cybertalk/ http://lore.altlinux.org/sisyphus-cybertalk \
sisyphus-cybertalk@lists.altlinux.org sisyphus-cybertalk@lists.altlinux.ru sisyphus-cybertalk@lists.altlinux.com
public-inbox-index sisyphus-cybertalk
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-cybertalk
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git