From: ALT beekeeper <hiver@altlinux.org> To: sisyphus-cybertalk@lists.altlinux.org Subject: [cyber] I: p9-20201115 x86_64 beehive_status: +11 -8 (120) Date: Sun, 15 Nov 2020 06:40:37 +0000 Message-ID: <20201115064037.GA31445@gyle.altlinux.org> (raw) 11 NEW error logs apache-commons-ognl-3.0.2-alt2_15.20120313svn1102435jpp8 [ERROR] [ERROR] Please refer to /usr/src/RPM/BUILD/apache-commons-ognl-3.0.2/target/surefire-reports for the individual test results. [ERROR] Please refer to dump files (if any exist) [date]-jvmRun[N].dump, [date].dumpstream and [date]-jvmRun[N].dumpstream. [ERROR] -> [Help 1] [ERROR] [ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch. [ERROR] Re-run Maven using the -X switch to enable full debug logging. [ERROR] [ERROR] For more information about the errors and possible solutions, please read the following articles: [ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/MojoFailureException automake_1.11-1.11.6-alt9 checking for upc... no configure: error: no Unified Parallel C compiler was found + exit_status=77 -- + exit 77 1 of 893 tests failed (58 tests were not run) cilk-5.4.6-alt11 perl -I. ./bfnnconv.pl ./cilk-faq.bfnn no ./cilk-faq.xrefdb (No such file or directory) at ./bfnnconv.pl line 43. S0 \rS1 \rQ1.1 \rQ1.2 \rQ1.3 \rQ1.4 \rQ1.5 \rQ1.6 \rQ1.7 \rQ1.8 \rS2 \rQ2.1 \rQ2.2 \rQ2.3 \rQ2.4 \rS3 \rQ3.1 \rQ3.2 \rQ3.3 \rQ3.4 \runknown question `compile' at ./bfnnconv.pl line 221, <> line 263. -- libtool: install: /bin/install -p .libs/libcilk.g.so.0.0.0 /usr/src/tmp/cilk-buildroot/usr/lib64/libcilk.g.so.0.0.0 /bin/install: cannot stat '.libs/libcilk.g.so.0.0.0': No such file or directory make[2]: *** [Makefile:565: install-libLTLIBRARIES] Error 1 csync2-2.0-alt1 printf("R\t%s\t%s\t%s\n", myname, peername, r_file); ret=0; make[1]: Leaving directory '/usr/src/RPM/BUILD/csync2-2.0' make[1]: Entering directory '/usr/src/RPM/BUILD/csync2-2.0' x86_64-alt-linux-gcc -DHAVE_CONFIG_H -I. -D'DBDIR="/var/lib/csync2"' -D'ETCDIR="/etc/csync2"' -Wall -pipe -frecord-gcc-switches -Wall -g -O2 -c -o cfgfile_scanner.o cfgfile_scanner.c make[1]: Leaving directory '/usr/src/RPM/BUILD/csync2-2.0' make[1]: Entering directory '/usr/src/RPM/BUILD/csync2-2.0' x86_64-alt-linux-gcc -Wall -pipe -frecord-gcc-switches -Wall -g -O2 -lgnutls -o csync2 action.o cfgfile_parser.o cfgfile_scanner.o check.o checktxt.o csync2.o daemon.o db.o error.o getrealfn.o groups.o rsync.o update.o urlencode.o conn.o prefixsubst.o db_api.o db_sqlite.o db_sqlite2.o db_mysql.o db_postgres.o -lrsync -ldl -lgnutls make[1]: Leaving directory '/usr/src/RPM/BUILD/csync2-2.0' + pdftotext /usr/src/RPM/SOURCES/paper.pdf paper.txt /usr/src/tmp/rpm-tmp.78066: line 131: pdftotext: command not found dopewars-1.5.12-alt1_20.1033svn /bin/sh ../../libtool --mode=link x86_64-alt-linux-gcc -pipe -frecord-gcc-switches -Wall -g -O2 -Wall -o libsound_sdl.la -rpath /usr/lib64 -lSDL -lpthread -lSDL_mixer sound_sdl.lo -lglib-2.0 libtool: link: rm -fr .libs/libsound_sdl.a libtool: link: x86_64-alt-linux-gcc -shared -fPIC -DPIC .libs/sound_sdl.o -lSDL -lpthread -lSDL_mixer -lglib-2.0 -g -O2 -Wl,-soname -Wl,libsound_sdl.so.0 -o .libs/libsound_sdl.so.0.0.0 libtool: link: (cd ".libs" && rm -f "libsound_sdl.so.0" && ln -s "libsound_sdl.so.0.0.0" "libsound_sdl.so.0") libtool: link: (cd ".libs" && rm -f "libsound_sdl.so" && ln -s "libsound_sdl.so.0.0.0" "libsound_sdl.so") libtool: link: ( cd ".libs" && rm -f "libsound_sdl.la" && ln -s "../libsound_sdl.la" "libsound_sdl.la" ) make[3]: Leaving directory '/usr/src/RPM/BUILD/dopewars/src/plugins' make[2]: *** [Makefile:574: all-recursive] Error 1 make[1]: *** [Makefile:474: all-recursive] Error 1 make: *** [Makefile:402: all] Error 2 libnih-1.0.3-alt2 ../test-driver: line 107: 622732 Aborted "$@" > $log_file 2>&1 FAIL: test_parse PASS: test_output -- # SKIP: 0 # XFAIL: 0 # FAIL: 1 # XPASS: 0 # ERROR: 0 See nih-dbus-tool/test-suite.log libopenh264-2.0.0-alt1 --- stderr --- [OpenH264] this = 0x0x1132c20, Error:Don't support width(9) or height(13) which is less than 16! [OpenH264] this = 0x0x1132c20, Error:CWelsH264SVCEncoder::EncodeFrame(), kiEncoderReturn 5 Full log written to /usr/src/RPM/BUILD/openh264-2.0.0/x86_64-alt-linux/meson-logs/testlog.txt FAILED: meson-test /usr/bin/meson test --no-rebuild --print-errorlogs libpng16-1.6.36-alt1 make[3]: Entering directory '/usr/src/RPM/BUILD/libpng16-1.6.36' FAIL: tests/pngtest make[3]: Leaving directory '/usr/src/RPM/BUILD/libpng16-1.6.36' -- # SKIP: 0 # XFAIL: 0 # FAIL: 1 # XPASS: 0 # ERROR: 0 .. contents:: :depth: 2 FAIL: tests/pngtest Testing libpng version 1.6.36 -- # SKIP: 0 # XFAIL: 0 # FAIL: 1 # XPASS: 0 # ERROR: 0 See ./test-suite.log python-module-jupyter_console-5.2.0-alt1.1 jupyter console --help-all works ... ok Ensure display protocol plain/text key is supported ... ERROR jupyter console --generate-config works ... ok -- test_handle_image_tempfile (jupyter_console.tests.test_image_handler.ZMQTerminalInteractiveShellTestCase) ... ok ERROR: Ensure display protocol plain/text key is supported Traceback (most recent call last): -- Ran 9 tests in 67.838s FAILED (errors=1) python-module-radar-0.3-alt1.git20131211.1.1.1 test_06_random_date_with_string_ranges_given (__main__.RadarTest) ... FAIL FAIL: test_06_random_date_with_string_ranges_given (__main__.RadarTest) Traceback (most recent call last): -- self.assertTrue(res > dt_start) AssertionError: False is not true Ran 6 tests in 0.037s FAILED (failures=1) test_01_random_datetime sgc-0.2.1-alt3 + xvfb-run sh makedocs _XSERVTransmkdir: ERROR: euid != 0,directory /tmp/.X11-unix will not be created. The XKEYBOARD keymap compiler (xkbcomp) reports: -- pygame.display.init() error: Couldn't open X11 display The full traceback has been saved in /usr/src/tmp/sphinx-err-zGepeg.log, if you want to report the issue to the developers. 8 error logs REMOVED from the list R-base-3.5.3-alt1 chromium-gost-83.0.4103.61-alt2.M90P.1 compiz-0.9.14.1-alt1 java-9-openjdk-0:9.0.4.11-alt2_6jpp8.M90P.1 jmock-0:2.8.2-alt2_6jpp8 librabbitmq-c-0.9.0-alt1 postfix-1:2.11.11-alt2 vi-traditional-050325-alt1 Total 120 error logs.
reply other threads:[~2020-11-15 6:40 UTC|newest] Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20201115064037.GA31445@gyle.altlinux.org \ --to=hiver@altlinux.org \ --cc=devel@lists.altlinux.org \ --cc=sisyphus-cybertalk@lists.altlinux.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Sisyphus cybertalk This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/sisyphus-cybertalk/0 sisyphus-cybertalk/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 sisyphus-cybertalk sisyphus-cybertalk/ http://lore.altlinux.org/sisyphus-cybertalk \ sisyphus-cybertalk@lists.altlinux.org sisyphus-cybertalk@lists.altlinux.ru sisyphus-cybertalk@lists.altlinux.com public-inbox-index sisyphus-cybertalk Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-cybertalk AGPL code for this site: git clone https://public-inbox.org/public-inbox.git