Saratov Linux User Group
 help / color / mirror / Atom feed
From: Eugene Horohorin <genix@list.ru>
To: Saratov Linux User Group Maillist <sarlug@lists.lug.ru>
Subject: Re: [Sarlug] Вопрос о USB.
Date: Fri, 11 Sep 2009 22:16:24 +0400
Message-ID: <692251c0909111116t7c0736cdga2a77b3179fed5ea@mail.gmail.com> (raw)
In-Reply-To: <29521e040909111045j1af54f4bq3ff2cf492640c006@mail.gmail.com>

питания хватает?

2009/9/11 Lortonix <lortonix@gmail.com>:
> Здравствуйте!
>
> Вопрос такой, при подключении внешнего винта через USB он не
> определяется правильно. А при подключении флешек все работает.
>
> Дистрибутив - Ubuntu Karmic Koala (development branch).
>
> :~$ dmesg
> [31560.606232] scsi9 : SCSI emulation for USB Mass Storage devices
> [31560.612054] usb-storage: device found at 10
> [31560.612058] usb-storage: waiting for device to settle before scanning
> [31565.612236] usb-storage: device scan complete
> [31565.612716] scsi 9:0:0:0: Direct-Access     ST916031 0AS
>       PQ: 0 ANSI: 2 CCS
> [31565.613248] sd 9:0:0:0: Attached scsi generic sg2 type 0
> [31565.646075] sd 9:0:0:0: [sdb] 312581808 512-byte logical blocks:
> (160 GB/149 GiB)
> [31565.646817] sd 9:0:0:0: [sdb] Write Protect is off
> [31565.646822] sd 9:0:0:0: [sdb] Mode Sense: 34 00 00 00
> [31565.646825] sd 9:0:0:0: [sdb] Assuming drive cache: write through
> [31565.649195] sd 9:0:0:0: [sdb] Assuming drive cache: write through
> [31565.649201]  sdb:
> [31565.684078] sd 9:0:0:0: [sdb] Assuming drive cache: write through
> [31565.684086] sd 9:0:0:0: [sdb] Attached SCSI disk
> [31565.892027] usb 1-3: reset high speed USB device using ehci_hcd and
> address 10
> [31566.028053] usb 1-3: device descriptor read/64, error -71
> [31566.268031] usb 1-3: device descriptor read/64, error -71
> [31566.484032] usb 1-3: reset high speed USB device using ehci_hcd and
> address 10
> [31566.620029] usb 1-3: device descriptor read/64, error -71
> [31566.860028] usb 1-3: device descriptor read/64, error -71
> [31567.076032] usb 1-3: reset high speed USB device using ehci_hcd and
> address 10
> [31567.500020] usb 1-3: device not accepting address 10, error -71
> [31567.612032] usb 1-3: reset high speed USB device using ehci_hcd and
> address 10
> [31573.032036] usb 1-3: device not accepting address 10, error -110
> [31573.032087] sd 9:0:0:0: Device offlined - not ready after error recovery
> [31573.035638] usb 1-3: USB disconnect, address 10
> [31573.152037] usb 1-3: new high speed USB device using ehci_hcd and address 11
> [31573.288030] usb 1-3: device descriptor read/64, error -71
> [31573.528053] usb 1-3: device descriptor read/64, error -71
> [31573.744340] usb 1-3: new high speed USB device using ehci_hcd and address 12
> [31573.880032] usb 1-3: device descriptor read/64, error -71
> [31574.120030] usb 1-3: device descriptor read/64, error -71
> [31574.336055] usb 1-3: new high speed USB device using ehci_hcd and address 13
> [31574.760021] usb 1-3: device not accepting address 13, error -71
> [31574.872030] usb 1-3: new high speed USB device using ehci_hcd and address 14
> [31575.296069] usb 1-3: device not accepting address 14, error -71
> [31575.296095] hub 1-0:1.0: unable to enumerate USB device on port 3
> [31575.628055] usb 3-1: new full speed USB device using ohci_hcd and address 6
> [31575.768027] usb 3-1: device descriptor read/64, error -62
> [31576.020037] usb 3-1: device descriptor read/64, error -62
> [31576.260035] usb 3-1: new full speed USB device using ohci_hcd and address 7
> [31576.400029] usb 3-1: device descriptor read/64, error -62
> [31576.644261] usb 3-1: device descriptor read/64, error -62
> [31576.884030] usb 3-1: new full speed USB device using ohci_hcd and address 8
> [31577.292016] usb 3-1: device not accepting address 8, error -62
> [31577.428059] usb 3-1: new full speed USB device using ohci_hcd and address 9
> [31577.840782] usb 3-1: device not accepting address 9, error -62
> [31577.840848] hub 3-0:1.0: unable to enumerate USB device on port 1
>
> В энторнетах предлагают отрубить модуль ehci_hcd, но
>
> :~$ sudo modprobe -r ehci_hcd
> FATAL: Module ehci_hcd not found.
>
> Проблема конкретной в моем дистрибутиве, загружался с лайфсиди и
> подключал - работает, на других компах также все нормально.
> Загружался на других версиях ядра, но результата это не дало.
>
> Есть идеи?
>
> --
> С уважением, Lortonix!
> _______________________________________________
> Sarlug mailing list
> Sarlug@lists.lug.ru
> https://lists.lug.ru/mailman/listinfo/sarlug



-- 
У каждого в башке свои тараканы...


  parent reply	other threads:[~2009-09-11 18:16 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-09-11 17:45 Lortonix
2009-09-11 18:07   ` Lortonix
2009-09-11 18:16 ` Eugene Horohorin [this message]
2009-09-11 18:18   ` Lortonix
2009-09-11 18:17 ` Alexander Burachewkij
2009-09-11 18:19   ` Eugene Horohorin
2009-09-11 18:25     ` [Sarlug] ADSL Alexander Burachewkij
2009-09-11 18:21   ` [Sarlug] Вопрос о USB Lortonix
2009-09-12 17:19     ` Яков Попов
2009-09-12 18:00       ` Lortonix

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=692251c0909111116t7c0736cdga2a77b3179fed5ea@mail.gmail.com \
    --to=genix@list.ru \
    --cc=sarlug@lists.lug.ru \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Saratov Linux User Group

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/sarlug/0 sarlug/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 sarlug sarlug/ http://lore.altlinux.org/sarlug \
		sarlug@lists.lug.ru sarlug@lug.ru
	public-inbox-index sarlug

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.sarlug


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git