From: Yakov Reztsov <yakovr_st@mail.ru>
To: hardware@lists.altlinux.org
Subject: Re: [Hardware] TV-tuner Eline TV-master
Date: Tue, 18 Mar 2008 23:27:38 +0300
Message-ID: <E1JbiPK-000JPI-00.yakovr_st-mail-ru@f151.mail.ru> (raw)
In-Reply-To: <200803181009.13391.taras-ko@mail.ru>
>
> Linux version 2.6.18-std-smp-alt8 (builder@hint1.office.altlinux.org) (gcc version 4.1.1 20070105 (ALT Linux, build 4.1.1-alt11)) #1 SMP Mon Sep 24 01:41:06 MSD 2007
Какая версия операционной системы ?
> bttv0: Bt878 (rev 17) at 0000:01:08.0, irq: 209, latency: 32, mmio: 0xd2000000
> bttv0: using: Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26 [card=8,insmod option]
> bttv0: gpio: en=00000000, out=00000000 in=00f4ff00 [init]
> bttv0: FlyVideo Radio=yes RemoteControl=yes Tuner=5 gpio=0xf4ff00
> bttv0: FlyVideo LR90=no tda9821/tda9820=no capture_only=no
> bttv0: using tuner=5
> bttv0: i2c: checking for MSP34xx @ 0x80... not found
> bttv0: i2c: checking for TDA9875 @ 0xb0... not found
> bttv0: i2c: checking for TDA7432 @ 0x8a... not found
> bttv0: i2c: checking for TDA9887 @ 0x86... not found
> bt878: Unknown symbol bttv_read_gpio
> bt878: Unknown symbol bttv_write_gpio
> bt878: Unknown symbol bttv_gpio_enable
похоже проблема с модулем bt878, а не настройками
не обновляли версию ядра с 2.6.18-std-smp-alt7 (Desktop 4.0) на 2.6.18-std-smp-alt8 ?
> tuner 2-0061: Setting mode_mask to 0x0e
> tuner 2-0061: chip found @ 0xc2 (bt878 #0 [sw])
> tuner 2-0061: Calling set_type_addr for type=5, addr=0xff, mode=0x0e
> tuner 2-0061: set addr for type -1
> tuner 2-0061: tuner 0x61: called during i2c_client register by adapter's attach_inform
> tuner 2-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
> tuner 2-0061: bt878 #0 [sw] tuner I2C addr 0xc2 with type 5 used for 0x0e
> bttv0: registered device video0
> bttv0: registered device vbi0
> bttv0: registered device radio0
> bttv0: PLL: 28636363 => 35468950 .. ok
> tuner 2-0061: Cmd VIDIOC_S_STD accepted for analog TV
> tuner 2-0061: switching to v4l2
> tuner 2-0061: tv freq set to 400.00
> tuner 2-0061: tv: param 0, range 1
> tuner 2-0061: Freq= 400.00 MHz, V_IF=38.93 MHz, Offset=0.00 MHz, div=7023
> tuner 2-0061: tv 0x1b 0x6f 0x8e 0x90
next prev parent reply other threads:[~2008-03-18 20:27 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-15 15:01 [Hardware] USB IrDA донгл ARKMICRO-3118 Павел
2008-02-15 15:12 ` Sergey Vlasov
2008-03-18 7:09 ` [Hardware] TV-tuner Eline TV-master Павел
2008-03-18 7:19 ` Хихин Руслан
2008-03-18 20:27 ` Yakov Reztsov [this message]
2008-03-21 13:42 ` Павел
2008-03-30 17:31 ` Павел
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1JbiPK-000JPI-00.yakovr_st-mail-ru@f151.mail.ru \
--to=yakovr_st@mail.ru \
--cc=hardware@lists.altlinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux hardware support
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
public-inbox-index hardware
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.hardware
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git