ALT Linux hardware support
 help / color / mirror / Atom feed
From: AShen <ashen@nsrz.ru>
To: hardware@lists.altlinux.org, shigorin@gmail.com
Subject: Re: [Hardware] radio mouse
Date: Wed, 22 Jul 2009 13:02:40 +0400
Message-ID: <4A66D5B0.6090202@nsrz.ru> (raw)
In-Reply-To: <20090722083341.GY28185@osdn.org.ua>

On 22.07.2009 12:33, Michael Shigorin wrote:
> On Sat, Jul 18, 2009 at 09:14:15AM +0400, Alexey Sidorov wrote:
>>> Подарили тут Genius Travel 915 Laser 2,4 GHz wireless laser
>>> mouse for notebook.  База в виде USB брелка и собственно
>>> мышка. На бранче 5.0 в Гноме просто работает. :)
>> Без проблем работают:
>> Defender Locarno s705 nano (
>> Genius Ergo 825 Laser (
>
> Моделей под рукой нет, но без проблем подключилась какая-то
> беспроводная Logitech с USB-трансивером; почти без проблем
> (немного потыкал kdebluetooth'ом) взлетела и bluetooth'ная
> Dell, которая внутри вроде как тоже Logitech.  А, хотя тут
> см. тж. ниже.
>
>> Очень криво работает Беспроводная Trust. При старте компа
>> заводится через раз. В итоге лежит на полке
>
> Если BT -- попробуй подвигать запуск service bluetooth
> (если старый bluez), вот только не помню, куда именно,
> но на такую мысль навело чтение /var/log/messages.
> В принципе где-то отложенный с удачей/неудачей был...
>

Trust MI-7700R подключилась автоматом, без всяких проблем. Просто 
воткнул и работает. Текущий сизиф.
Вот вывод (с момента подключения мыши):

udevadm monitor
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent

KERNEL[1248253153.984445] add 
/devices/pci0000:00/0000:00:12.0/usb1/1-2 (usb)
KERNEL[1248253153.992409] add 
/devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.0 (usb)
KERNEL[1248253153.992428] add 
/devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.0/usb_endpoint/usbdev1.3_ep81 
(usb_endpoint)
KERNEL[1248253153.992442] add 
/devices/pci0000:00/0000:00:12.0/usb1/1-2/usb_endpoint/usbdev1.3_ep00 
(usb_endpoint)
UDEV  [1248253155.549133] add 
/devices/pci0000:00/0000:00:12.0/usb1/1-2 (usb)
UDEV  [1248253155.549393] add 
/devices/pci0000:00/0000:00:12.0/usb1/1-2/usb_endpoint/usbdev1.3_ep00 
(usb_endpoint)
KERNEL[1248253155.614558] add      /module/usbhid (module)
KERNEL[1248253155.614845] add      /bus/hid/drivers/generic-usb (drivers)
KERNEL[1248253155.614986] add      /bus/usb/drivers/hiddev (drivers)
KERNEL[1248253155.615241] add 
/devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.0/0003:04FC:05DA.0001 (hid)
UDEV  [1248253155.615261] add      /module/usbhid (module)
UDEV  [1248253155.615403] add      /bus/hid/drivers/generic-usb (drivers)
UDEV  [1248253155.615750] add      /bus/usb/drivers/hiddev (drivers)
KERNEL[1248253155.622457] add 
/devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.0/input/input6 (input)
KERNEL[1248253155.622740] add 
/devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.0/input/input6/mouse2 
(input)
KERNEL[1248253155.622998] add 
/devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.0/input/input6/event6 
(input)
KERNEL[1248253155.623323] add      /class/usb (class)
KERNEL[1248253155.623608] add 
/devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.0/usb/hiddev0 (usb)
UDEV  [1248253155.623773] add      /class/usb (class)
KERNEL[1248253155.624405] add 
/devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.0/0003:04FC:05DA.0001/hidraw/hidraw0 
(hidraw)
UDEV  [1248253155.624427] add 
/devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.0 (usb)
KERNEL[1248253155.624440] add      /bus/usb/drivers/usbhid (drivers)
UDEV  [1248253155.624450] add      /bus/usb/drivers/usbhid (drivers)
UDEV  [1248253155.624735] add 
/devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.0/usb_endpoint/usbdev1.3_ep81 
(usb_endpoint)
UDEV  [1248253155.625028] add 
/devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.0/0003:04FC:05DA.0001 (hid)
UDEV  [1248253155.626427] add 
/devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.0/0003:04FC:05DA.0001/hidraw/hidraw0 
(hidraw)
KERNEL[1248253155.678478] add      /module/joydev (module)
UDEV  [1248253155.678876] add 
/devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.0/input/input6 (input)
UDEV  [1248253155.878387] add      /module/joydev (module)
UDEV  [1248253155.878435] add 
/devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.0/input/input6/event6 
(input)
UDEV  [1248253155.878468] add 
/devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.0/input/input6/mouse2 
(input)
UDEV  [1248253157.129155] add 
/devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.0/usb/hiddev0 (usb)



  parent reply	other threads:[~2009-07-22  9:02 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-07-17 10:52 Andriy Dobrovol`s`kii
2009-07-17 14:39 ` Вита не скажу
2009-07-17 14:49   ` Alexei V. Mezin
2009-07-17 14:58     ` Павел Знаменский
2009-07-17 15:08       ` Alexei V. Mezin
2009-07-17 22:12 ` Michael A. Kangin
2009-07-18  6:24   ` Andrey Rahmatullin
2009-07-18  5:14 ` Alexey Sidorov
2009-07-22  8:33   ` Michael Shigorin
2009-07-22  8:57     ` Denis G. Samsonenko
2009-07-22  9:02     ` AShen [this message]
2009-07-22 13:23     ` Michael Shigorin
2009-10-08 14:27     ` Alexey Sidorov
2009-07-22 17:24   ` Alexei V. Mezin
2009-07-24 19:41     ` Michael Shigorin
2009-07-24 20:42       ` Alexei V. Mezin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4A66D5B0.6090202@nsrz.ru \
    --to=ashen@nsrz.ru \
    --cc=hardware@lists.altlinux.org \
    --cc=shigorin@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

ALT Linux hardware support

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
		hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
	public-inbox-index hardware

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.hardware


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git