Re: [Hardware] Немного о ядрах 2.6.18-alt12 и о 2.6.24-alt5

["Шишков Евгений" <evgen@svi.pp.ru>]

Алексей Шенцев пишет:
> В сообщении от Tuesday 25 March 2008 10:05:38 вы написали:
>> Да. На 18 ядре может и заработает.
>> На 24 не работает. wks ядро поставить не могу т.к. nvidia модуль для
>> ice-wks-alt2 отсутствует.
> Возьми ядра от lakostis@
> http://www.unsafe.ru/lakostis/RPMS/ALTLinux/kernel-2.6.24/repo/i586/RPMS.kernel/

Скачал, установил.
#uname -r
2.6.24-wks-smp-alt2

В /dev/ появился /bus/usb/. И в /dev/ появился scanner-usbdev5.2

Сканер заработал.
Решил проверить резак.
Вставил диск. KDE примонтировал, и всё на диске видно.
И я уже почти обрадовался.

Запускаю k3b. Через 5 минут запустился.
Нарезалку видит, но работать с ней не хочет.

в dmesg валится:

ata5.00: status: { DRDY }
ata5: soft resetting link
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: qc timeout (cmd 0xa1)
ata5.00: failed to IDENTIFY (I/O error, err_mask=0x5)
ata5.00: revalidation failed (errno=-5)
ata5: failed to recover some devices, retrying in 5 secs
ata5: hard resetting link
ata5: port is slow to respond, please be patient (Status 0x80)
ata5: COMRESET failed (errno=-16)
ata5: hard resetting link
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: configured for UDMA/100
ata5: EH complete
ata5: limiting SATA link speed to 1.5 Gbps
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 8 in
          cdb ac 00 00 00 00 00 00 00  00 01 03 00 00 00 00 00
          res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: hard resetting link
ata5: port is slow to respond, please be patient (Status 0x80)
ata5: COMRESET failed (errno=-16)
ata5: hard resetting link
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata5.00: configured for UDMA/100
ata5: EH complete
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root


k3b навалил вот что:

(K3bDevice::Device) /dev/sr0: checking for RAW_R96R
(K3bDevice::ScsiCommand) failed:
                            command:    GET PERFORMANCE (ac)
                            errorcode:  72
                            sense key:  NO SENSE (2)
                            asc:        0
                            ascq:       3
(K3bDevice::Device) /dev/sr0: GET PERFORMANCE length det failed.
(K3bDevice::Device) /dev/sr0:  Number of supported write speeds via 2A: 7
(K3bDevice::Device) /dev/sr0 : 8467 KB/s
(K3bDevice::Device) /dev/sr0 : 7056 KB/s
(K3bDevice::Device) /dev/sr0 : 5645 KB/s
(K3bDevice::Device) /dev/sr0 : 4234 KB/s
(K3bDevice::Device) /dev/sr0 : 2822 KB/s
(K3bDevice::Device) /dev/sr0 : 1411 KB/s
(K3bDevice::Device) /dev/sr0 Invalid DVD speed: 0 KB/s
(K3bDevice::DeviceManager) setting current write speed of device /dev/sr0 to 0
<кусь: определение DVD читалки>
/dev/sr0 resolved to /dev/sr0
(K3bDevice::DeviceManager) dev /dev/sr0 already found
(K3bDevice::DeviceManager) found config entry for devicetype: Optiarc DVD RW AD-7191S
(K3bDevice::DeviceManager) found config entry for devicetype: _NEC DV-5800C
First sec data area: 43:41:33 (LBA 196608) (402653184
Last sec data area: 553:42:61 (LBA 2491711) (5103024128 Bytes)
Last sec layer 1: 00:00:00 (LBA 0) (0 Bytes)
Layer 1 length: 00:00:01 (LBA 1) (2048 Bytes)
Layer 2 length: 553:42:61 (LBA 2491711) (5103024128 Bytes)
(K3bDevice::Device) /dev/sr0 READ FORMAT CAPACITY: Current/Max 2 2295104
(K3bDevice::Device) /dev/sr0 READ FORMAT CAPACITY: 38 2295104 0
k3b: (K3bMedium) found medium:
k3b: =====================================================
DiskInfo:
Mediatype:       DVD+RW
Current Profile: DVD+RW
Disk state:      complete
Empty:           0
Rewritable:      1
Appendable:      0
Sessions:        0
Tracks:          1
Layers:          1
Capacity:        510:01:29 (LBA 2295104) (4700372992 Bytes)
Remaining size:  00:00:00 (LBA 0) (0 Bytes)
Used Size:       510:01:29 (LBA 2295104) (4700372992 Bytes)
Bg Format:       incomplete
k3b: =====================================================
k3b: (K3bCdrecordProgram) could not start /opt/schily/bin
k3b: (K3bMkisofsProgram) could not start /opt/schily/bin
k3b: (K3bExternalBinManager) Cdrecord 1.11a15 features: overburn, cdtext, suidroot,
outdated, burnfree
k3b: (K3bExternalBinManager) 1 11 -1 a15 seems to be cdrecord version >= 1.11a02, using
burnfree instead of burnproof
Devices:
------------------------------
Blockdevice:    /dev/sr0
Generic device:
Vendor:         Optiarc
Description:    DVD RW AD-7191S
Version:        1.01
Write speed:    1765
Profiles:       DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer
Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual
Layer, CD-ROM, CD-R, CD-RW
Read Cap:       DVD-ROM, DVD-R, DVD-R Sequential, DVD-R Dual Layer, DVD-R Dual Layer
Sequential, DVD-R Dual Layer Jump, DVD-RW, DVD-RW Restricted Overwrite, DVD-RW Sequential,
DVD+RW, DVD+R, DVD+RW Dual Layer, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW
Write Cap:      DVD-R, DVD-R Sequential, DVD-R Dual Layer, DVD-R Dual Layer Sequential,
DVD-R Dual Layer Jump, DVD-RW, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW,
DVD+R, DVD+R Dual Layer, CD-R, CD-RW
Writing modes:  SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R,
Ограниченная перезапись, Layer Jump
Reader aliases: /dev/sr0
------------------------------
Blockdevice:    /dev/hda
Generic device:
Vendor:         _NEC
Description:    DV-5800C
Version:        D9S2
Write speed:    0
Profiles:       DVD-ROM, CD-ROM
Read Cap:       DVD-ROM, DVD+RW, DVD+R, CD-ROM
Write Cap:      Ошибка
Writing modes:  Нет
Reader aliases: /dev/hda
------------------------------
kdecore (KAction): WARNING: KActionCollection::operator+=(): function is severely deprecated.
k3b: (K3bFileTreeView::addCdDeviceBranches)
k3b: (K3bFileTreeView::addCdDeviceBranches) done
k3b: (K3bFileTreeView::addCdDeviceBranches)
k3b: (K3bFileTreeView::addCdDeviceBranches) done

И делается это оооочень долго.
После загрузки, ещё через пару минут выдаёт, что есть диск. Но смонтировать его не может,
чтоб показать, что на нём.

Опять встрял....