smartctl version 5.36 [i586-alt-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: ST3500630NS Serial Number: 9QG5CVLW Firmware Version: 3.AEK User Capacity: 500,107,862,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sat Mar 22 08:53:19 2008 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 163) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 111 099 006 Pre-fail Always - 224749369 3 Spin_Up_Time 0x0003 093 093 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 8 5 Reallocated_Sector_Ct 0x0033 097 097 036 Pre-fail Always - 142 7 Seek_Error_Rate 0x000f 070 060 030 Pre-fail Always - 12252717 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 216 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 8 187 Unknown_Attribute 0x0032 001 001 000 Old_age Always - 126 189 Unknown_Attribute 0x003a 092 092 000 Old_age Always - 8 190 Temperature_Celsius 0x0022 062 060 045 Old_age Always - 672661542 194 Temperature_Celsius 0x0022 038 040 000 Old_age Always - 38 (Lifetime Min/Max 0/23) 195 Hardware_ECC_Recovered 0x001a 064 060 000 Old_age Always - 5907451 197 Current_Pending_Sector 0x0012 088 087 000 Old_age Always - 264 198 Offline_Uncorrectable 0x0010 088 087 000 Old_age Offline - 264 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 127 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 127 occurred at disk power-on lifetime: 186 hours (7 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 02 34 c8 e0 Error: UNC at LBA = 0x00c83402 = 13120514 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 78 5b 33 c8 e0 00 00:18:16.998 READ DMA EXT ec 00 00 00 00 00 a0 00 00:18:16.997 IDENTIFY DEVICE 25 00 78 5b 33 c8 e0 00 00:18:16.996 READ DMA EXT ec 00 00 00 00 00 a0 00 00:18:13.485 IDENTIFY DEVICE 25 00 78 5b 33 c8 e0 00 00:18:13.484 READ DMA EXT Error 126 occurred at disk power-on lifetime: 186 hours (7 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 02 34 c8 e0 Error: UNC at LBA = 0x00c83402 = 13120514 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 78 5b 33 c8 e0 00 00:18:16.998 READ DMA EXT ec 00 00 00 00 00 a0 00 00:18:16.997 IDENTIFY DEVICE 25 00 78 5b 33 c8 e0 00 00:18:16.996 READ DMA EXT ec 00 00 00 00 00 a0 00 00:18:13.485 IDENTIFY DEVICE 25 00 78 5b 33 c8 e0 00 00:18:13.484 READ DMA EXT Error 125 occurred at disk power-on lifetime: 186 hours (7 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 02 34 c8 e0 Error: UNC at LBA = 0x00c83402 = 13120514 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 78 5b 33 c8 e0 00 00:18:16.998 READ DMA EXT ec 00 00 00 00 00 a0 00 00:18:16.997 IDENTIFY DEVICE 25 00 78 5b 33 c8 e0 00 00:18:16.996 READ DMA EXT ec 00 00 00 00 00 a0 00 00:18:13.485 IDENTIFY DEVICE 25 00 78 5b 33 c8 e0 00 00:18:13.484 READ DMA EXT Error 124 occurred at disk power-on lifetime: 186 hours (7 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 02 34 c8 e0 Error: UNC at LBA = 0x00c83402 = 13120514 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 78 5b 33 c8 e0 00 00:18:16.998 READ DMA EXT ec 00 00 00 00 00 a0 00 00:18:16.997 IDENTIFY DEVICE 25 00 78 5b 33 c8 e0 00 00:18:16.996 READ DMA EXT ec 00 00 00 00 00 a0 00 00:18:13.485 IDENTIFY DEVICE 25 00 78 5b 33 c8 e0 00 00:18:13.484 READ DMA EXT Error 123 occurred at disk power-on lifetime: 186 hours (7 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 02 34 c8 e0 Error: UNC at LBA = 0x00c83402 = 13120514 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 78 5b 33 c8 e0 00 00:18:16.998 READ DMA EXT ec 00 00 00 00 00 a0 00 00:18:16.997 IDENTIFY DEVICE 25 00 78 5b 33 c8 e0 00 00:18:16.996 READ DMA EXT ca 00 18 e8 ff 0f e0 00 00:18:13.485 WRITE DMA ec 00 00 00 00 00 a0 00 00:18:13.484 IDENTIFY DEVICE SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 90% 216 935867394 # 2 Extended offline Completed: read failure 90% 206 935867394 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.