From: Andrei Bulava <abulava@altlinux.ru> To: hardware@altlinux.ru Subject: Re: [Hardware] Не хватает прерываний? Date: Tue, 06 Dec 2005 15:16:54 +0200 Message-ID: <43958F46.9040700@altlinux.ru> (raw) In-Reply-To: <E1EjbWt-0008Op-00.yakovr_st-mail-ru@f13.mail.ru> Yakov Reztsov wrote: >>[mutabor@nort Publications]$ cat /proc/interrupts >> CPU0 >> 0: 296958 XT-PIC timer >> 1: 4345 XT-PIC keyboard >> 2: 0 XT-PIC cascade >> 4: 34601 XT-PIC serial >> 5: 0 XT-PIC CS4231 >> 8: 1 XT-PIC rtc >> 9: 0 XT-PIC acpi >> 10: 6552 XT-PIC eth0 >> 11: 0 XT-PIC usb-uhci >> 12: 0 XT-PIC MPU401 UART >> 14: 46883 XT-PIC ide0 >> 15: 548 XT-PIC ide1 >>NMI: 0 >>LOC: 296925 >>ERR: 0 >>MIS: 0 <skip /> > А если попробовать ядро загрузить ядро с параметрами noacpi noapic ? Если я правильно ошибаюсь, то ядро и так уже запущено с noapic. С apic XT-PIC меняется на IO-APIC-edge или IO-APIC-level: $ cat /proc/interrupts CPU0 0: 517414260 IO-APIC-edge timer 1: 267105 IO-APIC-edge i8042 7: 0 IO-APIC-edge parport0 8: 184873775 IO-APIC-edge rtc 9: 0 IO-APIC-level acpi 14: 1637373 IO-APIC-edge ide0 15: 2994288 IO-APIC-edge ide1 17: 247006 IO-APIC-level YMFPCI 18: 3886487 IO-APIC-level eth0 19: 52071607 IO-APIC-level nvidia 20: 0 IO-APIC-level ohci_hcd:usb2 21: 249 IO-APIC-level ehci_hcd:usb1 22: 4579605 IO-APIC-level NVidia nForce2, ohci_hcd:usb3 NMI: 0 LOC: 516672156 ERR: 0 MIS: 0 -- // AB1002-UANIC
next prev parent reply other threads:[~2005-12-06 13:16 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2005-12-06 7:48 Yury Aliaev 2005-12-06 12:02 ` Yakov Reztsov 2005-12-06 12:09 ` Yury Aliaev 2005-12-06 14:58 ` Maxim Tyurin 2005-12-07 4:47 ` Yury Aliaev 2005-12-06 13:16 ` Andrei Bulava [this message] 2005-12-06 12:11 ` Yury Aliaev 2005-12-07 13:04 ` [Hardware] " Konstantin A. Lepikhov 2005-12-08 9:11 ` Yury Aliaev 2005-12-08 10:24 ` Sviatoslav Sviridov 2005-12-08 21:36 ` Konstantin A. Lepikhov 2005-12-07 15:40 ` [Hardware] " Yakov Reztsov 2005-12-08 9:09 ` Yury Aliaev 2005-12-08 21:34 ` [Hardware] " Konstantin A. Lepikhov
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=43958F46.9040700@altlinux.ru \ --to=abulava@altlinux.ru \ --cc=hardware@altlinux.ru \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux hardware support This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \ hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org public-inbox-index hardware Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.hardware AGPL code for this site: git clone https://public-inbox.org/public-inbox.git