From: Andrei Bulava <abulava@altlinux.ru>
To: hardware@altlinux.ru
Subject: Re: [Hardware] Посмотреть модеот оперативной памяти
Date: Fri, 20 May 2005 10:29:24 +0300
Message-ID: <428D91D4.2030504@altlinux.ru> (raw)
In-Reply-To: <428D730B.6070405@mail.ru>
Sergey Ogarkov wrote:
> Привет всем !!!
> Можно как нибуть посмотреть модель оперативной памяти неразбирая
> сервер?:)
Теоретически - установить lm_sensors, почитать
http://www2.lm-sensors.nu/~lm78/cvs/lm_sensors2/doc/chips/eeprom и
запустить 1) sensors-detect; 2) depmod -A; 3) /etc/init.d/lm_sensors
start; 4) decode-dimms.pl
Практически, на ядрах 2.6 (с 2.4 проблем быть не должно, если
sensors-detect сумел обнаружить eeprom, но на материнке с чипсетом
nforce3 под ALM24 меня постигла неудача, а с древним via apollo pro
VT82C686 - полный порядок, узнал, что у меня память производства
всекитайской корпорации NONAME ;-) ) -
# decode-dimms.pl
PC DIMM Serial Presence Detect Tester/Decoder
By Philip Edelbrock, Christian Zuckschwerdt and others
Version 2.6.6
ls: /proc/sys/dev/sensors/: No such file or directory
Number of SDRAM DIMMs detected and decoded 0
Try '/usr/bin/decode-dimms.pl --format' for html output.
Хотя при этом:
$ cat /etc/sysconfig/lm_sensors |grep -v '^#'
MODULE_0=i2c-nforce2
MODULE_1=eeprom
MODULE_2=asb100
MODULE_3=w83l785ts
2kernel@packages.altlinux.org: в принципе, понятно почему - смотрел
http://archives.andrew.net.au/lm-sensors/msg27013.html. Можно что-нибудь
с этим сделать?
Если у вас ядро 2.6 - попробуйте
http://members.aon.at/vormayr/spd.c.bz2, должно помочь. Хотя, поскольку
вопрос звучал как "не разбирая сервер", думаю, что у вас ALM24 с ядром
2.4 ;-)
--
// AB1002-UANIC
next prev parent reply other threads:[~2005-05-20 7:29 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-20 5:18 Sergey Ogarkov
2005-05-20 7:29 ` Andrei Bulava [this message]
2005-05-20 9:09 ` Sergey Ogarkov
2005-05-21 9:16 ` Zilke Pavel
2005-05-21 18:52 ` Andrey Rahmatullin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=428D91D4.2030504@altlinux.ru \
--to=abulava@altlinux.ru \
--cc=hardware@altlinux.ru \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux hardware support
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
public-inbox-index hardware
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.hardware
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git