From: "Alexei V. Mezin" <alexei_vm@micmedia.ru> To: hardware@altlinux.ru Subject: [Hardware] Скорость hdd Date: Tue, 03 May 2005 22:59:26 +0400 Message-ID: <4277CA0E.7090107@micmedia.ru> (raw) Имеется не очень новая мамка на via686 (Dual PIII). На ней набортный АТА-100 контроллер и два винта на разных шлейфах: PDC20265: chipset revision 2 PDC20265: 100% native mode on irq 18 PDC20265: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER Mode. ide2: BM-DMA at 0xb800-0xb807, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0xb808-0xb80f, BIOS settings: hdg:pio, hdh:pio Probing IDE interface ide2... hde: ST3200822A, ATA DISK drive ide2 at 0xa800-0xa807,0xac02 on irq 18 Probing IDE interface ide3... hdg: ST3120024A, ATA DISK drive Винты работают как-то не очень быстро: [root@threebears root]# hdparm -t /dev/hde /dev/hde: Timing buffered disk reads: 60 MB in 3.01 seconds = 19.93 MB/sec [root@threebears root]# hdparm -T /dev/hde [root@threebears root]# hdparm -t /dev/hdg /dev/hdg: Timing buffered disk reads: 54 MB in 3.06 seconds = 17.63 MB/sec А при копировании с винта на винт 7-12Мб/с (по данным mc). Это нормальная скорость? Вроде как побыстрее должно быть.
next reply other threads:[~2005-05-03 18:59 UTC|newest] Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top 2005-05-03 18:59 Alexei V. Mezin [this message] 2005-05-04 4:38 ` Andrey Rahmatullin 2005-05-04 8:53 ` Re[2]: " Alexei V. Mezin 2005-05-04 16:33 ` Alexei V. Mezin 2005-05-04 19:27 ` Sergey S. Skulachenko
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=4277CA0E.7090107@micmedia.ru \ --to=alexei_vm@micmedia.ru \ --cc=alex783@hotbox.ru \ --cc=hardware@altlinux.ru \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux hardware support This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \ hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org public-inbox-index hardware Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.hardware AGPL code for this site: git clone https://public-inbox.org/public-inbox.git