ALT Linux hardware support
 help / color / mirror / Atom feed
From: Andrey Brindeew <abr@altlinux.ru>
To: hardware@altlinux.ru
Subject: [Hardware] USB 2.0 (VIA) with USB drive 60G (Myson Century) == TROUBLE
Date: Wed, 31 Aug 2005 22:33:37 +0400
Message-ID: <20050831183337.GC7154@abr.pp.ru> (raw)

[-- Attachment #1: Type: text/plain, Size: 2604 bytes --]

Hi!

Приобрел по случаю USB-drive на 60G, диск внутри Toshiba, про
себя говорит следующее:

USB Mass Storage Device
Manufacturer: Myson Century, Inc.
Serial Number: 100
Speed: 480Mb/s (high)
USB Version:  2.00
Device Class: 00(>ifc )
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 64
Number of Configurations: 1
Vendor Id: 04cf
Product Id: 8818
Revision Number: b0.07

Config Number: 1
  Number of Interfaces: 1
  Attributes: c0
  MaxPower Needed:  10mA

  Interface Number: 0
    Name: usb-storage
    Alternate Number: 0
    Class: 08(stor.) 
    Sub Class: 5
    Protocol: 50
    Number of Endpoints: 2

      Endpoint Address: 03
      Direction: out
      Attribute: 2
      Type: Bulk
      Max Packet Size: 512
      Interval: 0ms

      Endpoint Address: 84
      Direction: in
      Attribute: 2
      Type: Bulk
      Max Packet Size: 512
      Interval: 0ms

В системе (i815-based) установлен следующий PCI-контроллер USB 2.0:
0000:02:0d.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61)
0000:02:0d.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61)
0000:02:0d.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 63)

Ядро 2.4.26-std-up-alt9.

После монтирования диска чтение-запись осуществляется крайне медленно. На
работе под двумя ОСями работает нормально.

[abr@abr RPMS]$ date; cp kernel-source-2.4.29-1.0.0-alt1.noarch.rpm ~; date
Срд Авг 31 22:21:09 MSD 2005
Срд Авг 31 22:22:38 MSD 2005
[abr@abr RPMS]$ ls -l kernel-source-2.4.29-1.0.0-alt1.noarch.rpm
-rw-r--r--  1 abr abr 31093800 Янв 25  2005 kernel-source-2.4.29-1.0.0-alt1.noarch.rpm

Т.е. где-то 2.76МБит/сек. (если я не ошибся в подсчетах), а должно быть 480МБит/сек.
Полученное значение не дотягивает даже до USB 1.1.

Причем Card-ридер, подключенный к этому же контроллеру, работает на ура:
[abr@abr 102msdcf]$ date; cp photos-2.zip /mnt/backups/abr; date
Срд Авг 31 22:27:48 MSD 2005
Срд Авг 31 22:28:36 MSD 2005
[abr@abr 102msdcf]$ ls -l photos-2.zip
-rwx------  1 abr abr 465488144 Авг 21 14:09 photos-2.zip

Получаем около 77МБит/с.

После гугления были найдены следующие ссылки:
http://www.mail-archive.com/linux-usb-users@lists.sourceforge.net/msg13633.html
http://www.mail-archive.com/linux-usb-users@lists.sourceforge.net/msg13731.html

В итоге ищется нормальный PCI-ный контроллер USB 2.0, не VIA.
Порекомендуйте производителя/модель плиз.

-- 
WBR, Andrey Brindeew.
"No one person can understand Perl culture completely"
(C) Larry Wall.

[-- Attachment #2: Type: application/pgp-signature, Size: 245 bytes --]

             reply	other threads:[~2005-08-31 18:33 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-08-31 18:33 Andrey Brindeew [this message]
2005-09-01  9:59 ` Andrei Popov
2005-09-01 16:15   ` Igor V.Marenkov
2005-09-01 16:31     ` Re[2]: " Andrei Popov
2005-09-03  8:25   ` [Hardware] " Konstantin A. Lepikhov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20050831183337.GC7154@abr.pp.ru \
    --to=abr@altlinux.ru \
    --cc=hardware@altlinux.ru \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

ALT Linux hardware support

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
		hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
	public-inbox-index hardware

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.hardware


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git