Aleksey Avdeev пишет: > Aleksey Avdeev пишет: >> Sergey Vlasov пишет: > ... >>> Как именно проявляется неработоспособность (в частности, что >>> появляется в dmesg при попытке использования сети)? >> Проблема наблюдается на 2x хостах: >> ... >> 2. 2.6.18-std-smp-alt8 #1 SMP Mon Sep 24 01:41:06 MSD 2007 i686 >> GNU/Linux -- неработоспособность сети после установки самособранного >> junior`a. Завтра смогу сообщить подробности (сейчас помещение покидать >> надо). > > Сдесь я нифига не понимаю: после установки с другого образа (я на этой > железки Кольчугу тестирую) -- нерабочим стал eepro100, а e100 работает. > > На данный момент, ядро осталось тоже: > > 2.6.18-std-smp-alt8 #1 SMP Mon Sep 24 01:41:06 MSD 2007 i686 GNU/Linux После перезагрузки с подключенным к сети eth1 -- сеть работает, но поднималась она около минуты (хотя по логу этого и не видно)... Выжимки из /var/log/messages (дата косая): Oct 6 01:29:08 localhost kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 217 Oct 6 01:29:08 localhost kernel: eth0: r10001.05, the Linux device driver for Realtek Ethernet Controllers at 0xee00, 00:1b:fc:75:68:32, IR Q 217 Oct 6 01:29:08 localhost kernel: BUG: soft lockup detected on CPU#1! Oct 6 01:29:08 localhost kernel: [] show_trace_log_lvl+0x5b/0x16d Oct 6 01:29:08 localhost kernel: [] show_trace+0xf/0x11 Oct 6 01:29:08 localhost kernel: [] dump_stack+0x15/0x17 Oct 6 01:29:08 localhost kernel: [] softlockup_tick+0xa6/0xb4 Oct 6 01:29:08 localhost kernel: [] update_process_times+0x39/0x5c Oct 6 01:29:08 localhost kernel: [] smp_apic_timer_interrupt+0x5b/0x62 Oct 6 01:29:08 localhost kernel: [] apic_timer_interrupt+0x1f/0x30 Oct 6 01:29:08 localhost kernel: DWARF2 unwinder stuck at apic_timer_interrupt+0x1f/0x30 Oct 6 01:29:08 localhost kernel: Leftover inexact backtrace: Oct 6 01:29:08 localhost kernel: [] delay_tsc+0x7/0x13 Oct 6 01:29:08 localhost kernel: [] __delay+0x6/0x7 Oct 6 01:29:08 localhost kernel: [] R1000_READ_GMII_REG+0x1d/0x3f [r1000] Oct 6 01:29:08 localhost kernel: [] r1000_set_medium+0x162/0x179 [r1000] Oct 6 01:29:08 localhost kernel: [] r1000_init_one+0x802/0x918 [r1000] Oct 6 01:29:08 localhost kernel: [] __driver_attach+0x0/0x5d Oct 6 01:29:08 localhost kernel: [] pci_device_probe+0x36/0x57 Oct 6 01:29:08 localhost kernel: [] driver_probe_device+0x45/0x9a Oct 6 01:29:08 localhost kernel: [] __driver_attach+0x38/0x5d Oct 6 01:29:08 localhost kernel: [] bus_for_each_dev+0x39/0x5b Oct 6 01:29:08 localhost kernel: [] driver_attach+0x16/0x18 Oct 6 01:29:08 localhost kernel: [] __driver_attach+0x0/0x5d Oct 6 01:29:08 localhost kernel: [] bus_add_driver+0x6c/0x107 Oct 6 01:29:08 localhost kernel: [] __pci_register_driver+0x47/0x63 Oct 6 01:29:08 localhost kernel: [] sys_init_module+0x17b9/0x1952 Oct 6 01:29:08 localhost kernel: [] snd_mem_proc_read+0x0/0xe2 [snd_page_alloc] Oct 6 01:29:08 localhost kernel: [] syscall_call+0x7/0xb Oct 6 01:29:08 localhost kernel: Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet Network Adapter Oct 6 01:29:08 localhost kernel: Driver version:1.05 Oct 6 01:29:08 localhost kernel: Released date:2006/10/25 Oct 6 01:29:08 localhost kernel: Link Status:Not Linked Oct 6 01:29:08 localhost kernel: I/O Base:0xEE00(I/O port) Oct 6 01:29:08 localhost kernel: IRQ:217 Oct 6 01:29:08 localhost kernel: ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 21 (level, low) -> IRQ 225 Oct 6 01:29:08 localhost kernel: e100: eth1: e100_probe: addr 0xfdefe000, irq 225, MAC addr 00:02:B3:B8:DB:B7 Oct 6 01:29:08 localhost kernel: ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 20 (level, low) -> IRQ 233 Oct 6 01:29:08 localhost kernel: ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[233] MMIO=[fdeff000-fdeff7ff] Max Packet=[256] IR/IT cont exts=[4/8] Oct 6 01:29:08 localhost kernel: ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 217 Oct 6 01:29:08 localhost kernel: ehci_hcd 0000:00:13.5: EHCI Host Controller Oct 6 01:29:08 localhost kernel: ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6 Oct 6 01:29:08 localhost kernel: ehci_hcd 0000:00:13.5: debug port 1 Oct 6 01:29:08 localhost kernel: ehci_hcd 0000:00:13.5: irq 217, io mem 0xfe029000 Oct 6 01:29:08 localhost kernel: ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Oct 6 01:29:08 localhost kernel: usb usb6: configuration #1 chosen from 1 choice Oct 6 01:29:08 localhost kernel: hub 6-0:1.0: USB hub found Oct 6 01:29:08 localhost kernel: hub 6-0:1.0: 10 ports detected Oct 6 01:29:08 localhost kernel: ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 185 Oct 6 01:29:08 localhost kernel: hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... Oct 6 01:29:08 localhost kernel: Adding 1044184k swap on /dev/hda1. Priority:-1 extents:1 across:1044184k Oct 6 01:29:08 localhost kernel: EXT3 FS on hda2, internal journal Oct 6 01:29:08 localhost kernel: device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com Oct 6 01:29:08 localhost kernel: NET: Registered protocol family 17 Oct 6 01:29:08 localhost kernel: e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex Oct 6 01:29:08 localhost hotplug: Hotplug (cpu.rc) start: succeeded Oct 6 01:29:08 localhost hotplug: Hotplug (sound.rc) start: succeeded ... Oct 6 01:29:10 localhost init: Entering runlevel: 3 Oct 6 01:29:10 localhost x11presetdrv: Preparing X11 drivers succeeded Oct 6 01:29:10 localhost ifrename: Executing ifrename: succeeded Oct 6 01:29:10 localhost network: Computing interface groups: Oct 6 01:29:10 localhost network: . Oct 6 01:29:10 localhost last message repeated 2 times Oct 6 01:29:10 localhost network: 3 interfaces found Oct 6 01:29:10 localhost network: Starting group 0/virtual (1 interfaces) Oct 6 01:29:10 localhost network: ^IStarting lo: Oct 6 01:29:10 localhost network: . Oct 6 01:29:10 localhost last message repeated 3 times Oct 6 01:29:10 localhost network: OK Oct 6 01:29:10 localhost network: Starting group 1/realphys (2 interfaces) Oct 6 01:29:10 localhost network: ^IStarting eth0: Oct 6 01:29:10 localhost network: . Oct 6 01:29:10 localhost last message repeated 2 times Oct 6 01:29:10 localhost dhcpcd[2323]: timed out waiting for a valid DHCP server response Oct 6 01:29:10 localhost network: ! Oct 6 01:29:10 localhost network: . Oct 6 01:29:10 localhost network: OK Oct 6 01:29:10 localhost network: ^IStarting eth1: Oct 6 01:29:10 localhost network: . Oct 6 01:29:10 localhost last message repeated 5 times Oct 6 01:29:10 localhost dhcpcd.exe: interface eth1 has been configured with new IP=192.168.1.174 Oct 6 01:29:10 localhost network: OK Oct 6 01:29:10 localhost network: Processing /etc/net/vlantab: Oct 6 01:29:10 localhost network: empty. Oct 6 01:29:10 localhost rc: Starting network: succeeded ... Oct 6 01:29:13 localhost hotplug: Hotplug (usb.rc) start: succeeded Oct 6 01:29:13 localhost pnp.rc[3070]: missing kernel or user mode driver atkbd Oct 6 01:29:13 localhost hotplug: Hotplug (pnp.rc) start: succeeded Oct 6 01:29:15 localhost kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html Oct 6 01:29:15 localhost kernel: eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others Oct 6 01:29:15 localhost hotplug: Hotplug (pci.rc) start: succeeded Oct 6 01:29:15 localhost hotplug: Hotplug (misc.rc) start: succeeded Oct 6 01:29:15 localhost hotplug: Hotplug (block.rc) start: succeeded Oct 6 01:29:15 localhost kernel: ACPI: Power Button (FF) [PWRF] Oct 6 01:29:15 localhost kernel: ACPI: Power Button (CM) [PWRB] Oct 6 01:29:15 localhost kernel: ACPI: Fan [FAN] (on) Oct 6 01:29:15 localhost kernel: ACPI: Thermal Zone [THRM] (40 C) Oct 6 01:29:15 localhost hotplug: Hotplug (acpi.rc) start: succeeded Oct 6 01:29:15 localhost udevd-final: Handling remaining udev events: succeeded Oct 6 01:29:15 localhost sound.agent[4237]: Restore mixer values for /class/sound/controlC0 (0) Oct 6 01:29:15 localhost /etc/net: ERROR: /etc/net/scripts/ifup-removable: USE_HOTPLUG is disabled for eth0 Oct 6 01:29:15 localhost /etc/net: ERROR: /etc/net/scripts/ifup-removable: USE_HOTPLUG is disabled for eth1 Oct 6 01:29:15 localhost rc: Starting fbsetfont: succeeded ... $ sudo -H lsmod|fgrep 100 eepro100 35216 0 e100 39688 0 mii 9600 2 eepro100,e100 r1000 23180 0 -- С уважением. Алексей.