From: Vladimir Karpinsky <vkarpinsky@mail.ru> To: community@lists.altlinux.org Subject: [Comm] Опять RAID при старте системы Date: Thu, 16 Apr 2015 10:59:16 +0300 Message-ID: <552F6BD4.1050809@mail.ru> (raw) Здравствуйте! Установил starterkit (TDE) на 2 диска разбитые на 4 RIAD1. После перзагрузки получаю: md3 : active raid1 sda6[0] 1734763456 blocks [2/1] [U_] md2 : active raid1 sda5[0] 195311552 blocks [2/1] [U_] md1 : active (auto-read-only) raid1 sda2[0] 3906496 blocks [2/1] [U_] md0 : active raid1 sda1[0] 19529664 blocks [2/1] [U_] md125 : active raid1 sdb[1] 1718630400 blocks [2/1] [_U] unused devices: <none> В cat /etc/mdadm.conf про md125 ничего нет: MAILADDR root PROGRAM /sbin/mdadm-syslog-events DEVICE partitions ARRAY /dev/md0 UUID=a429018d:b45d2895:42891b37:41128c9a ARRAY /dev/md1 UUID=bc6e752d:07f75735:bfe78010:bc810f04 ARRAY /dev/md2 UUID=8d7dd259:4b335b45:42891b37:41128c9a ARRAY /dev/md3 UUID=fdb16ddb:99cfee35:bfe78010:bc810f04 Останавливаю md125, добавляю соответствующие sdb? в массивы 0-3, всё работает: md3 : active raid1 sdb6[2] sda6[0] 1734763456 blocks [2/1] [U_] [>....................] recovery = 0.2% (4383872/1734763456) finish=184.1min speed=156566K/sec md2 : active raid1 sdb5[2] sda5[0] 195311552 blocks [2/1] [U_] resync=DELAYED md1 : active raid1 sdb2[2] sda2[0] 3906496 blocks [2/1] [U_] resync=DELAYED md0 : active raid1 sdb1[2] sda1[0] 19529664 blocks [2/1] [U_] resync=DELAYED unused devices: <none> Дожидаюсь окончания синхронизации, перезагружаюсь и получаю картину, приведённую в начале этого сообщения. При загрузке происходит завис примерно на минуту после сообщение об ошибке в Address range (не могу найти этого сообщения в dmesg, при следующей перезагрузке прочитаю внимательнее), далее идёт запуск массивов и загрузка. -- С уважением, Владимир.
next reply other threads:[~2015-04-16 7:59 UTC|newest] Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-04-16 7:59 Vladimir Karpinsky [this message] 2015-04-16 8:47 ` Anton Gorlov 2015-04-16 9:03 ` Sergey
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=552F6BD4.1050809@mail.ru \ --to=vkarpinsky@mail.ru \ --cc=community@lists.altlinux.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git