Re: [Comm] ошибка ejabberd

[Borodulin Maksim <b.m.p@mail.ru>]

Borodulin Maksim пишет:
> при регистрации админа выдает RPC failed on the node ejabberd@itacer: 
> nodedown
> в чем это вызвано?
> _______________________________________________
> community mailing list
> community@lists.altlinux.org
> https://lists.altlinux.org/mailman/listinfo/community
он стартует нормально вот лог:
=PROGRESS REPORT==== 25-Sep-2007::14:50:36 ===
          supervisor: {local,mnesia_sup}
             started: [{pid,<0.60.0>},
                       {name,mnesia_kernel_sup},
                       {mfa,{mnesia_kernel_sup,start,[]}},
                       {restart_type,permanent},
                       {shutdown,infinity},
                       {child_type,supervisor}]

=PROGRESS REPORT==== 25-Sep-2007::14:50:36 ===
         application: mnesia
          started_at: ejabberd@itacer
но при регистрации админа он выдает:
RPC failed on the node ejabberd@itacer: {'EXIT',
                                         {badarg,
                                          [{erlang,
                                            port_control,
                                            
[stringprep_port,1,"localhost"]},
                                           {stringprep,control,2},
                                           {jlib,nameprep,1},
                                           {ejabberd_auth,auth_modules,1},
                                           {ejabberd_auth,is_user_exists,2},
                                           {ejabberd_auth,try_register,3},
                                           {ejabberd_ctl,process,1},
                                           {rpc,'-handle_call/3-fun-0-',5}]}

Подскажите что не правильно? вот конфиг:
%override_acls.


% Users that have admin access.  Add line like one of the following 
after you
% will be successfully registered on server to get admin access:
%{acl, admin, {user, "aleksey"}}.
{acl, admin, {user, "jabberadmin"}}.

% Blocked users:
%{acl, blocked, {user, "test"}}.

% Local users:
{acl, local, {user_regexp, ""}}.

% Another examples of ACLs:
%{acl, jabberorg, {server, "jabber.org"}}.
%{acl, aleksey, {user, "aleksey", "jabber.ru"}}.
%{acl, test, {user_regexp, "^test"}}.
%{acl, test, {user_glob, "test*"}}.


% Only admins can use configuration interface:
{access, configure, [{allow, admin}]}.

% Every username can be registered via in-band registration:
{access, register, [{allow, all}]}.

% None username can be registered via in-band registration:
%{access, register, [{deny, all}]}.

% After successful registration user will get message with following subject
% and body:
{welcome_message,
 {"Welcome!",
  "Welcome to ALT Linux Jabber Service hosted on ejabberd server.  "
  "For information about Jabber visit http://jabber.org"}}.
% Replace them with 'none' if you don't want to send such message:
%{welcome_message, none}.

% List of people who will get notifications about registered users
%{registration_watchers, ["admin1@localhost",
%                         "admin2@localhost"]}.

% Only admins can send announcement messages:
{access, announce, [{allow, admin}]}.


% Only non-blocked users can use c2s connections:
{access, c2s, [{deny, blocked},
               {allow, all}]}.

% Set shaper with name "normal" to limit traffic speed to 1000B/s
{shaper, normal, {maxrate, 1000}}.

% Set shaper with name "fast" to limit traffic speed to 50000B/s
{shaper, fast, {maxrate, 50000}}.

% For all users except admins used "normal" shaper
{access, c2s_shaper, [{none, admin},
                      {normal, all}]}.

% For all S2S connections used "fast" shaper
{access, s2s_shaper, [{fast, all}]}.

% Admins of this server are also admins of MUC service:
{access, muc_admin, [{allow, admin}]}.

% All users are allowed to use MUC service:
{access, muc, [{allow, all}]}.

% This rule allows access only for local users:
{access, local, [{allow, local}]}.


% Authentification method.  If you want to use internal user base, then use
% this line:
{auth_method, internal}.

% For LDAP uthentification use these lines instead of above one:
%{auth_method, ldap}.
%{ldap_servers, ["localhost"]}.    % List of LDAP servers
%{ldap_uidattr, "uid"}.            % LDAP attribute that holds user ID
%{ldap_base, "dc=example,dc=com"}. % Base of LDAP directory


% Host name: (replace for your hostname)
{host, "localhost"}.


% Default language for server messages
{language, "ru"}.

% Listened ports:
{listen,
% Ordinary client-2-server service
 [{5222, ejabberd_c2s,     [{access, c2s},
                            {shaper, c2s_shaper}]},

% SSL-enabled client-2-server service
  {5223, ejabberd_c2s,     [{access, c2s},
                            ssl,
                            {certfile, "/etc/ssl/certs/ejabberd.pem"}]},

% Server-2-server service
  {5269, ejabberd_s2s_in,  [{shaper, s2s_shaper}]},

% The list between <jabber-config> and </jabber-config> is automatically
% generated by installing packages and running jabber-config script.
% Feel free to comment out, but don't edit it manually!
%
% If you want to edit it something here, comment it out there and
% re-create what you want outside jabber-config section.

% <jabber-config>
% </jabber-config>

% External MUC jabber-muc (but internal mod_muc is better :))
% {5554, ejabberd_service, [{ip, {127, 0, 0, 1}},
%                           {access, all},
%                           {host, "muc.localhost", [{password, 
"secret"}]}]},

% Jabber ICQ Transport
% {5555, ejabberd_service, [{ip, {127, 0, 0, 1}},
%                           {access, all},
%                           {hosts, ["icq.localhost", "sms.localhost"], 
[{password, "secret"}]}]},

% AIM Transport
% {5556, ejabberd_service, [{ip, {127, 0, 0, 1}},
%                           {access, all},
%                           {host, "aim.localhost", [{password, 
"secret"}]}]},

% MSN Transport
% {5557, ejabberd_service, [{ip, {127, 0, 0, 1}},
%                           {access, all},
%                           {host, "msn.localhost", [{password, 
"secret"}]}]},

% Yahoo! Transport
% {5558, ejabberd_service, [{ip, {127, 0, 0, 1}},
%                           {access, all},
%                           {host, "yahoo.localhost", [{password, 
"secret"}]}]},

% External JUD (internal is more powerful,
% but doesn't allow to register users from other servers)
% {5559, ejabberd_service, [{ip, {127, 0, 0, 1}},
%                           {access, all},
%                           {host, "jud.localhost", [{password, 
"secret"}]}]},

% HTTP service (You may choose options HTTP-polling and Web-administering)
% When commenting out, be careful with commas
  {5280, ejabberd_http,    [http_poll, web_admin]}
 ]}.

% If SRV lookup fails, then port 5269 is used to communicate with remote 
server
{outgoing_s2s_port, 5269}.

% Used modules:
{modules,
 [
  {mod_register,   [{access, register}]},
  {mod_roster,     []},
  {mod_privacy,    []},
  {mod_configure,  []},
  {mod_configure2, []},
  {mod_disco,      [{extra_domains, ["users.jabber.org"]}]},
  {mod_stats,      []},
  {mod_vcard,      []},
  {mod_offline,    []},
  {mod_echo,       []},
  {mod_private,    []},
  {mod_irc,        []},
% Default options for mod_muc:
%   host: "conference." ++ ?MYNAME
%   access: all
%   access_create: all
%   access_admin: none (only room creator has owner privileges)
  {mod_muc,        [{access, muc},
                    {access_create, muc},
                    {access_admin, muc_admin}]},
  {mod_pubsub,     []},
  {mod_time,       []},
  {mod_last,       []},
  {mod_version,    []}
 ]}.

Подскажите плиз...